• Produktionstorvet, 427, 323A

    2800 Kgs. Lyngby

    Denmark

20032020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article in proceedings
2019

Injection Moulding Simulation and Validation of Thin Wall Components for Precision Applications

Islam, A., Li, X. & Wirska, M., 2019, Advances in Manufacturing II. Gapiński, B., Szostak, M. & Ivanov, V. (eds.). Springer, Vol. 4. p. 96-107

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2018

Damping Behavior of Carbon Nanotube Reinforced Nanocomposites: Micromechanical Modeling and Experiments

Doagou-Rad, S., Jensen, J. S. & Islam, A., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

117 Downloads (Pure)
2017

Biological features produced by additive manufacturing processes using vat photopolymerization method

Davoudinejad, A., Mendez Ribo, M., Pedersen, D. B., Tosello, G. & Islam, A., 2017, Proceedings of the euspen Special Interest Group Meeting: Micro/Nano Manufacturing. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

Multi-Scale Modeling of the Structural and Vibrational Behavior of Carbon Nanotube Reinforced Polymeric Nanocomposite Plates

Doagou Rad, S., Jensen, J. S. & Islam, A., 2017, Proceedings of the sixth ECCOMAS Thematic Conference on the Mechanical Response of Composites. Remmers, J. J. C. & Turon, A. (eds.). Eindhoven University of Technology, p. 94-106

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2016

A conceptual framework for designing micro electrical connectors for hearing aid instruments

Doagou Rad, S., Islam, A. & Fuglsang-Philip, M., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 4

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
479 Downloads (Pure)

Feasibility study of injection mouldable conductive plastic for the hearing aid applications

Merca, T. D. D., Lindberg, T. & Islam, A., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 4

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
448 Downloads (Pure)

Influence of Process Temperatures on Blister Creation in Micro Film Insert Molding of a Dual Layer Membrane

Wöhner, T., R. Whiteside, B., Tosello, G., Hansen, H. N. & Islam, A., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 51-54

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
357 Downloads (Pure)
2015

A comparative study of metal and ceramic injection moulding for precision applications

Islam, A., Giannekas, N., Marhöfer, D. M., Tosello, G. & Hansen, H. N., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 567-570

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A Method for Dimensional and Surface Optical Measurements Uncertainty Assessment on Micro Structured Surfaces Manufactured by Jet-ECM

Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 554-557 138

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

Characterization method for blisters created in film insert moulding

Wöhner, T., Hansen, H. N., Tosello, G. & Islam, A., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
145 Downloads (Pure)

Comparative analysis of different process simulation settings of a micro injection molded part featuring conformal cooling

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. p. 65-66 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Mould Design and Material selection for Film Insert Moulding of Direct Methanol Fuel Cell Packaging

Wöhner, T., Senkbeil, S., Olesen, T. L., Hansen, H. N., Islam, A. & Tosello, G., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

154 Downloads (Pure)

Optical micro-metrology of structured surfaces micro-machined by jet-ECM

Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015, Proceedings of the 15th International Conference of the european Society for Precision Engineering and Nanotechnology . 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Validation of precision powder injection molding process simulations using a spiral test geometry

Marhöfer, M., Müller, T., Tosello, G., Islam, A., Hansen, H. N. & Piotter, V., 2015, Proceedings of the Polymer Processing Society Conference 2015. American Institute of Physics, 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
703 Downloads (Pure)
2014

Experimental investigation on corrosion properties of LDS MID for Hearing Aid applications

Islam, A., Hansen, H. N., Risager, F. & Tang, P. T., 2014, ANTEC 2014 Conference Proceedings. 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
337 Downloads (Pure)

Experimental investigation on shrinkage and surface replication of injection moulded ceramic parts

Islam, A., Giannekas, N., Marhöfer, D. M., Tosello, G. & Hansen, H. N., 2014, Proceedings of the 4th International Conference on Nanomanufacturing (nanoMan2014). 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
423 Downloads (Pure)

Integrated Design, an Approach Towards DfµMA

Omidvarnia, F., Hansen, H. N., Bissacco, G. & Islam, A., 2014, 13th International Design Conference - Design 2014. Design Society, p. 343-352

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2013

Advancements on the simulation of the micro injection moulding process

Marhöfer, D. M., Tosello, G., Hansen, H. N. & Islam, A., 2013, Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. 4M Association, 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
1189 Downloads (Pure)

Effects of holding pressure and process temperatures on the mechanical properties of moulded metallic parts

Islam, A., Hansen, H. N., Esteves, N. M. & Rasmussen, T. T., 2013, ANTEC 2013 Conference Proceedings. Society of Plastics Engineers, 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
1512 Downloads (Pure)

Two-component injection moulding simulation of ABS-POM micro structured surfaces

Tosello, G., Hansen, H. N. & Islam, A., 2013, Proceedings of the 13th euspen International Conference. The European Society for Precision Engineering and Nanotechnology, p. 47-50

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2012

8 Pin RIC Socket for Hearing Aid Applications

Islam, A., Hansen, H. N., Davids, S. & Kristensen, L., 2012, Proceedings of the 9th International Conference on Multi-Material Micro Manufacture. Noll, H., Adamovic, N. & Dimov, S. (eds.). Research Publishing Services, p. 241-249

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Packing parameters effect on injection molding of polypropylene nanostructured surfaces

Calaon, M., Tosello, G., Hansen, H. N., Ravn, C. & Islam, A., 2012, Proceedings of the 70th Annual Technical Conference & Exhibition. 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
738 Downloads (Pure)
2011

A new pair of hard-soft plastic combination for precision manufacturing of two component plastic parts.

Islam, A., Hansen, H. N., Marhöfer, D. M. & Bondo, M., 2011, Proceedings of 11th International Conference of the European Society for Precision Engineering & Nano Technology. euspen

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
298 Downloads (Pure)

Effects of glass fibers on the properties of micro molded plastic parts

Islam, A., Hansen, H. N., Gasparin, S. & Bondo, M., 2011, ANTEC 2011 Conference. Society of Plastics Engineers

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
319 Downloads (Pure)
2009

2k micro moulding for MID fabrication

Islam, A., Hansen, H. N. & Jørgensen, M. B., 2009, Polymer Process Engineering 09: PPE-Enhanced polymer processing. 1 ed. Bradford: University of Bradford, Vol. 1. p. 273-293 419 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
711 Downloads (Pure)

Physical masking process for integrating micro metallic structures on polymer substrate: Physical mask

Islam, M. A. & Hansen, H. N., 2009, 9th International Conference of European Society of Precision Engineering and Nanotechnology: EUSPEN. 1st ed. Austria: Euspen-Copy & Druck, Vol. 2nd. p. 22-25 557 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
603 Downloads (Pure)

Two component micro injection molding for MID fabrication

Islam, M. A., Hansen, H. N. & Tang, P. T., 2009, ANTEC 2009 Annual Technical Conference, Chicago, Illinois USA: ANTEC@NPE 2009. Chicago, Illinois USA

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
192 Downloads (Pure)
2008

Introduction of a new pair of thermoplastic materials for precision manufacturing of moulded interconnect devices.

Islam, M. A., Hansen, H. N. & Tang, P. T., 2008, Proceedings of the European Society for Precision Engineering and Nanotechnology: EUSPEN 08. 1 ed. Austria: Copy & Druck, Vol. 2. p. 555-559 647 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Two component injection moulding: an interface quality and bond strength dilemma

Islam, M. A., Hansen, H. N. & Tang, P. T., 2008, Proceedings from the 24th Annual Meeting of the Polymer Processing Society: PPS-24. Salerno- Italy, Vol. 24.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

1 Downloads (Pure)
2007

Experimental investigation of the factors influencing the polymer-polymer bond strength during two component injection moulding.

Islam, M. A., Hansen, H. N. & Tang, P. T., 2007, Proceedings from PPS07 EA. Copenhagen, Denmark: Hexagon Holding ApS

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Selected process chains for manufacturing of moulded interconnect devices (MID)

Hansen, H. N., Tang, P. T., Islam, M. A. & Tosello, G., 2007, Proceedings of the 7th international conference and 9th annual general meeting of euspen. Cranfield, UK: eudpen, Vol. Volume I. p. 176-179

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2006

Bond strength of two component injection moulded MID

Islam, M. A., Hansen, H. N., Tang, P. T. & Kjær, E. M., 2006, 7th International Congress-Moulded Interconnect Devices: MID 2006. p. 245-252

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

2003

Pros and cons of mass customization: Masscustomization

Islam, M. A., 2003, Proceedings from the first seminar on Development of Modular Products: Proceedings from DMP seminar. Erixon & Kenger, P. (eds.). 1st ed. Framtidsdalen, Borlange, Sweden: Hogskolan Dalarna, Vol. 1st,. p. 100-1005 232 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review