• Produktionstorvet, 427, 323A

    2800 Kgs. Lyngby

    Denmark

20032020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Advances in Ultrasonic Welding of Thermoplastic Composites: A Review

Bhudolia, S. K., Gohel, G., Leong, K. F. & Islam, A., 2020, In : Materials. 13, 6, 28 p., 1284.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
96 Downloads (Pure)

An application-oriented roadmap to select polymeric nanocomposites for advanced applications: A review

Doagou-Rad, S., Islam, A. & Merca, T. D., 2020, In : Polymer Composites. 41, 4, p. 1153-1189 37 p.

Research output: Contribution to journalReviewResearchpeer-review

Blister Formation in Film Insert Moulding

Wöhner, T., Islam, A., Hansen, H. N., Tosello, G. & R. Whiteside, B., 2020, In : Micromachines. 11, 11 p., 424.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
46 Downloads (Pure)

Enhanced Energy Savings in Indoor Environments with Effective Daylight Utilization and Area Segregation

Haq, M. A. U., Islam, A., Shihavuddin, ASM., Maruf, M. H., Al Mansur, A. & Hassan, M. Y., 2020, In : Symmetry. 12, 8, 19 p., 1313.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
8 Downloads (Pure)

Patterning of worm-like soft polydimethylsiloxane structures using a TiO2 nanotubular array

Harito, C., Lledo, R. C., Bavykin, D. V., Moshrefi-Torbati, M., Islam, A., Yuliarto, B. & Walsh, F. C., 2020, (Accepted/In press) In : Journal of Applied Polymer Science. 11 p., 49795.

Research output: Contribution to journalJournal articleResearchpeer-review

The Influence of the Hybridization Process on the Mechanical and Thermal Properties of Polyoxymethylene (POM) Composites with the Use of a Novel Sustainable Reinforcing System Based on Biocarbon and Basalt Fiber (BC/BF)

Andrzejewski, J., Gapiński, B., Islam, A. & Szostak, M., 2020, In : Materials. 13, 16, 24 p., 3496.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
2 Downloads (Pure)
2019

Characterization techniques for evaluation of micro scale vat photopolymerization-based additive manufacturing

Danielak, A. H., Mendez Ribo, M., Üstünyagiz, E., Almdal, K., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 44-47

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Comprehensive characterization and material modeling for ceramic injection molding simulation performance validations

Tosello, G., Marhöfer, D. M., Islam, A., Müller, T., Plewa, K. & Piotter, V., 2019, In : International Journal of Advanced Manufacturing Technology. 102, p. 225-240

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
59 Downloads (Pure)

Development of metal–graphene-filled hybrid composites: Characterization of mechanical, thermal, and electrical properties

Doagou Rad, S., Islam, A. & Alnasser, A., 2019, In : Journal of Composite Materials. 53, 24, p. 3363–3376

Research output: Contribution to journalJournal articleResearchpeer-review

Impact of post-processing stages on vat-photopolymerized specimens

M. Ribo, M., Danielak, A. H., Andersen, S. A., Üstünyagiz, E., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 155 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
63 Downloads (Pure)

Injection Moulding Simulation and Validation of Thin Wall Components for Precision Applications

Islam, A., Li, X. & Wirska, M., 2019, Advances in Manufacturing II. Gapiński, B., Szostak, M. & Ivanov, V. (eds.). Springer, Vol. 4. p. 96-107

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Investigation of conductive hybrid polymer composites reinforced with copper micro fibers and carbon nanotubes produced by injection molding

Doagou-Rad, S., Islam, A., Antusch, S., Jung, J., Klein, A., Plewa, K. & Piotter, V., 2019, In : Materials Today Communications. 20, 7 p., 100566.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
10 Downloads (Pure)

Optimization of a self-peeling vat for precision vat photopolymerization setups

M. Ribo, M., Danielak, A. H., Islam, A. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 234-237

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
87 Downloads (Pure)

Process chains for the mass production of transparent crowns for posterior teeth

Islam, A., Hansen, H. N., Rabenow, L. & Nielsen, K., 2019, In : CIRP annals. 68, 1, p. 591-594

Research output: Contribution to journalJournal articleResearchpeer-review

2018

Characterisation of the Influence of the Colour in Resin for Micro Parts Production by Photopolymerisation Based Additive Manufacturing System

Danielak, A. H., M. Ribo, M., Pedersen, D. B. & Islam, A., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 64-69

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Correlation of mechanical and electrical properties with processing variables in MWCNT reinforced thermoplastic nanocomposites

Doagou-Rad, S., Islam, A. & Jensen, J. S., 2018, In : Journal of Composite Materials. 52, 26, p. 3681–3697

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
167 Downloads (Pure)

Damping Behavior of Carbon Nanotube Reinforced Nanocomposites: Micromechanical Modeling and Experiments

Doagou-Rad, S., Jensen, J. S. & Islam, A., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

117 Downloads (Pure)

Development of Highly Conductive Hybrid Composites

Islam, A. & Rad, S. D., 2018, p. 9-10.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
88 Downloads (Pure)

Direct fabrication of bio-inspired gecko-like geometries with vat polymerization additive manufacturing method

Davoudinejad, A., M. Ribo, M., Pedersen, D. B., Islam, A. & Tosello, G., 2018, In : Journal of Micromechanics and Microengineering. 28, 10 p., 085009.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
202 Downloads (Pure)

Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features

Eladl, A., Mostafa, R., Islam, A., Loaldi, D., Soltan, H., Hansen, H. N. & Tosello, G., 2018, In : Micromachines. 9, 2, 19 p., 58.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
389 Downloads (Pure)

Interaction of nanofillers in injection-molded graphene/carbon nanotube reinforced PA66 hybrid nanocomposites

Doagou-Rad, S., Islam, A., Jensen, J. S. & Alnasser, A., 2018, In : Journal of Polymer Engineering. 38, 10, p. 971-981

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
127 Downloads (Pure)

Multimaterial Micro Injection Molding

Islam, A., 2018, Micro Injection Molding. Tosello, G. (ed.). Munich: Carl Hanser Verlag, p. 339-377

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Multimaterial Micro Injection Molding

Islam, A., 2018. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
160 Downloads (Pure)

Reproduction of multi-hierarchical structural surfaces by vat-photopolymerization

M. Ribo, M., Davoudinejad, A., Pedersen, D. B., Tosello, G. & Islam, A., 2018.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
62 Downloads (Pure)

Systematic Analysis of the Effects of Moulding Conditions on the Properties of Shape Memory Polymers

Danielak, A. H. & Islam, A., 2018, In : A I P Conference Proceedings Series. 2065, 5 p., 020001.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
244 Downloads (Pure)

The Present and Future Perspectives of Moulded Interconnect Device (MID) Technologies

Islam, A., 2018. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
46 Downloads (Pure)
2017

3D Printing of Bio-inspired surfaces

Méndez Ribó, M. & Islam, A., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
361 Downloads (Pure)

Biological features produced by additive manufacturing processes using vat photopolymerization method

Davoudinejad, A., Mendez Ribo, M., Pedersen, D. B., Tosello, G. & Islam, A., 2017, Proceedings of the euspen Special Interest Group Meeting: Micro/Nano Manufacturing. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

Direct electroplating of plastic for advanced electrical applications

Islam, A., Hansen, H. N. & Tang, P. T., 2017, In : C I R P Annals. 66, 1, p. 209–212

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
373 Downloads (Pure)

Influence of Processing Conditions on the Mechanical Behavior of MWCNT Reinforced Thermoplastic Nanocomposites

Doagou Rad, S., Islam, A. & Jensen, J. S., 2017, In : Procedia CIRP. 66, p. 131-136 6 p.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
305 Downloads (Pure)

Injection Moulding Simulation and Experimental Validation of Hearing Aid Shells

Islam, A. & Li, X., 2017. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
83 Downloads (Pure)

Investigation of the mechanical properties of GNP/MWCNT reinforced PA66 hybrid nanocomposites

Doagou Rad, S., Islam, A. & Søndergaard Jensen, J., 2017. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
116 Downloads (Pure)

Multi-Scale Modeling of the Structural and Vibrational Behavior of Carbon Nanotube Reinforced Polymeric Nanocomposite Plates

Doagou Rad, S., Jensen, J. S. & Islam, A., 2017, Proceedings of the sixth ECCOMAS Thematic Conference on the Mechanical Response of Composites. Remmers, J. J. C. & Turon, A. (eds.). Eindhoven University of Technology, p. 94-106

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Tolerances in micro manufacturing

Hansen, H. N., Zhang, Y. & Islam, A., 2017. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
477 Downloads (Pure)
2016

A conceptual framework for designing micro electrical connectors for hearing aid instruments

Doagou Rad, S., Islam, A. & Fuglsang-Philip, M., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 4

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
479 Downloads (Pure)

Experimental Investigation of Comparative Process Capabilities of Metal and Ceramic Injection Molding for Precision Applications

Islam, A., Giannekas, N., Marhöfer, D. M., Tosello, G. & Hansen, H. N., 2016, In : Journal of Micro and Nano-Manufacturing. 4, 3, p. 1-9 031003.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
42 Downloads (Pure)

Feasibility study of injection mouldable conductive plastic for the hearing aid applications

Merca, T. D. D., Lindberg, T. & Islam, A., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 4

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
448 Downloads (Pure)

Gate Design in Injection Molding of Microfluidic Components Using Process Simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2016, In : Journal of Micro and Nano-Manufacturing. 4, 2, 12 p., 025001.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
39 Downloads (Pure)

Influence of Process Temperatures on Blister Creation in Micro Film Insert Molding of a Dual Layer Membrane

Wöhner, T., R. Whiteside, B., Tosello, G., Hansen, H. N. & Islam, A., 2016, Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, p. 51-54

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
357 Downloads (Pure)
2015

A comparative study of metal and ceramic injection moulding for precision applications

Islam, A., Giannekas, N., Marhöfer, D. M., Tosello, G. & Hansen, H. N., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 567-570

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A Method for Dimensional and Surface Optical Measurements Uncertainty Assessment on Micro Structured Surfaces Manufactured by Jet-ECM

Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, p. 554-557 138

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

Characterization method for blisters created in film insert moulding

Wöhner, T., Hansen, H. N., Tosello, G. & Islam, A., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

File
145 Downloads (Pure)

Comparative analysis of different process simulation settings of a micro injection molded part featuring conformal cooling

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015, Proceedings of Euspen's 15th International Conference & Exhibition. p. 65-66 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

D1.1 Product/Tool/Process Simulation Report for PoT Components: High Precision Micro Production Technologies Collaborative project - Small or medium-scale focused research project1.10.2012 – 30.9.2015

Marhöfer, M., Tosello, G., Islam, A., Wilson, S., Brask, A., Kanaris, A., Marson, S., Neal, G., van Eijk, J., van Eijk, J., Qian, J., Ziedler, H., Martin, A., Brandao, C., Riemer, O., Brandao, C., Kuschel, S., Geilert, P. & Vogelsang, A., 2015, Hi-Micro project. 26 p.

Research output: Book/ReportReport

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
296 Downloads (Pure)

Mould Design and Material selection for Film Insert Moulding of Direct Methanol Fuel Cell Packaging

Wöhner, T., Senkbeil, S., Olesen, T. L., Hansen, H. N., Islam, A. & Tosello, G., 2015, Proceedings of the 4M/ICOMM2015 Conference. Annoni, M., Fassi, I., Wiens, G. J. & Dimov, S. (eds.). Research Publishing Services, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

154 Downloads (Pure)