Photo of Alberto Basso
  • Produktionstorvet, 427, 314

    2800 Kgs. Lyngby

    Denmark

20192020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 3 Conference abstract for conference
  • 2 Journal article
  • 1 Conference abstract in proceedings
  • 1 Conference article
2020

Characterization of near-zero pressure powder injection moulding with sacrificial mould by using fingerprint geometries

Zhang, Y., Basso, A., Christensen, S. E., Pedersen, D. B., Staal, L., Valler, P. & Hansen, H. N., 2020, (Accepted/In press) In : CIRP annals.

Research output: Contribution to journalJournal articleResearchpeer-review

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, F., Basso, A., Kain, M., Loaldi, D., Li, D., Zhang, Y. & Tosello, G., 2020, In : AIP Conference Proceedings. 2205, 1, 5 p., 020013.

Research output: Contribution to journalConference articleResearchpeer-review

Replication of micro-structured surfaces by integrating AM with PIM

Basso, A., Mendez Ribo, M., Christensen, S. E., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2020. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Study of the distribution of rubber particles in ground tire rubber/polypropylene blends

Basso, A., Zhang, Y., Linnemann, L. & Hansen, H. N., 2020, (Accepted/In press) In : Materials Today: Proceedings.

Research output: Contribution to journalJournal articleResearchpeer-review

2019

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 71-74

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
84 Downloads (Pure)

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
53 Downloads (Pure)

Study of the Distribution of Rubber Particles in Ground Tire Rubber/Polypropylene Blends

Basso, A. & Zhang, Y., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review