Wind Turbine Structures and Component Design

  1. 2019
  2. Published

    Experimental observation of fatigue degradation in a composite wind turbine blade. / Chen, Xiao.

    In: Composite Structures, Vol. 212, 15.03.2019, p. 547-551.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  3. Published

    2D and 3D characterization of rolling contact fatigue cracks in manganese steel wing rails from a crossing. / Dhar, S.; Danielsen, Hilmar Kjartansson; Fæster, Søren; Rasmussen, Christian Jørgen; Juul Jensen, Dorte.

    In: Wear, Vol. 436-437, 202959, 2019.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  4. Published

    3D X-ray computerized tomography of White Etching Cracks (WEC). / Danielsen, H. K.; Carrasco, A. J.; Fæster, S.; Dahl, K. V.; Guzmán, F. Gutiérrez; Sauvage, P.; Jacobs, G.

    In: Materials Characterization, Vol. 150, 2019, p. 78-87.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  5. Published

    Comparison of numerical modelling techniques for impact investigation on a wind turbine blade. / Verma, Amrit Shankar; Vedvik, Nils Petter; Haselbach, Philipp Ulrich; Gao, Zhen; Jiang, Zhiyu.

    In: Composite Structures, Vol. 209, 2019, p. 856-878.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  6. Published

    Effect of matrix cracks on stiffness degradation of laminated composite beams. / Castro Ardila, Oscar Gerardo; Branner, Kim.

    Proceedings of the 22nd International Conference on Composite Materials (ICCM22). 2019.

    Research output: Chapter in Book/Report/Conference proceedingArticle in proceedings – Annual report year: 2019Researchpeer-review

  7. Published
  8. Published

    Evaluating Structural Failure of Load-Carrying Composite Box Beams with Different Geometries and Load Conditions. / Tang, Jing; Chen, Xiao; Yang, Ke.

    In: Applied Composite Materials, Vol. 26, No. 4, 2019, p. 1151-1161.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  9. Published

    Extreme wind fluctuations: Joint statistics, extreme turbulence, and impact on wind turbine loads. / Hannesdóttir, Ásta; Kelly, Mark C.; Dimitrov, Nikolay Krasimirov.

    In: Wind Energy Science, Vol. 4, No. 2, 2019, p. 325-342.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  10. Published

    Fatigue damage evolution in unidirectional glass/epoxy composites under a cyclic load. / Castro, Oscar; Carraro, Paolo Andrea; Maragoni, Lucio; Quaresimin, Marino.

    In: Polymer Testing, Vol. 74, 2019, p. 216-224.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  11. Published

    FE8 type laboratory testing of white etching crack (WEC) bearing failure mode in 100Cr6. / Danielsen, Hilmar Kjartansson; Gutiérrez Guzmán, F.; Muskulus, M.; Rasmussen, B. H. ; Shirani, Mehdi; Cornel, D.; Sauvage, P.; Wu, J.; Petrov, R.; Jacobs, G.

    In: Wear, Vol. 434-435, 202962, 2019.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

Previous 1 2 3 4 5 6 7 8 ...31 Next