Villum Center for Advanced Structural and Material Testing

Publications

Publications per year 2015 2016 2017 2018 2019 2020 2021

• 85 Journal article
• 21 Article in proceedings
• 18 Conference article
• 7 Conference abstract in proceedings
• 23 More
  • 7 Paper
  • 5 Report
  • 3 Ph.D. thesis
  • 3 Book chapter
  • 3 Conference abstract for conference
  • 1 Poster
  • 1 Review

Publications per year

Publications per year

Search results

• 2021

  AQUADA: Automated quantification of damages in composite wind turbine blades for LCOE reduction

  Chen, X., Shihavuddin, ASM., Madsen, S. H., Thomsen, K., Rasmussen, S. & Branner, K., 2021, In: Wind Energy. 24, 6, p. 535-548 14 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Wind Turbine 100%
  • Inspection 33%
  • Levelized Cost of Energy 33%
  • Turbine 22%
  • Turbine Blades 22%
  132 Downloads (Pure)

• Bending-moment-based approach to match damage-equivalent strains in fatigue testing

  Castro, O., Berring, P., Branner, K., Hvejsel, C. F., Yeniceli, S. C. & Belloni, F., 2021, In: Engineering Structures. 226, 10 p., 111325.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Bending Moment 100%
  • Beam 40%
  • Equivalent Strain 40%
  • Fatigue Testing 40%
  • Cross Sections 20%

• Electrodialytic remediation of municipal solid waste incineration fly ash as pre-treatment before geopolymerisation with coal fly ash

  Zhan, X. & Kirkelund, G. M., 2021, In: Journal of Hazardous Materials. 412, 125220.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Ash 100%
  • Incineration 85%
  • Municipal Solid Waste 42%
  • Remediation 35%
  • Geopolymer 28%
  9 Downloads (Pure)

• Fatigue testing of a 14.3 m composite blade embedded with artificial defects – damage growth and structural health monitoring

  Chen, X., Semenov, S., McGugan, M., Madsen, S. H., Yeniceli, S. C., Berring, P. & Branner, K., 2021, In: Composites - Part A: Applied Science and Manufacturing. 140, 17 p., 106189.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Damage Growth 100%
  • Composite 60%
  • Fatigue Crack Growth 60%
  • Fatigue Damage 60%
  • Structural Behavior 60%
  15 Downloads (Pure)

• Keyed shear connections with looped U‐bars subjected to normal and shear forces Part I: Experimental investigation

  Sørensen, J. H., Hoang, L. C. & Poulsen, P. N., 2021, In: Structural Concrete. 22, 4, p. 2418-2431

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Normal Force 100%
  • Shear Connection 60%
  • Experimental Investigation 40%
  • Shear Force 40%
  • Shear Behavior 40%

• Keyed shear connections with looped U‐bars subjected to normal and shear forces Part II: rigid‐plastic modeling of the ultimate capacity

  Sørensen, J. H., Hoang, L. C. & Poulsen, P. N., 2021, In: Structural Concrete. 22, 4, p. 2407-2417

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Friction 100%
  • Load Limits 100%
  • Shear Connection 100%
  • Internals 100%
  • Shearing 100%

• Leading edge erosion of wind turbine blades: Understanding, prevention and protection

  Mishnaevsky Jr., L., Hasager, C. B., Bak, C., Tilg, A-M., Bech, J. I., Doagou Rad, S. & Fæster, S., 2021, In: Renewable Energy. 169, p. 953-969 17 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Erosion 100%
  • Wind Turbine 100%
  • Leading Edge 50%
  • Turbine Blades 37%
  • Mathematical Model 25%

• Optimizing laboratory X‐ray diffraction contrast tomography for grain structure characterization of pure iron

  Lindkvist, A., Fang, H., Juul Jensen, D. & Zhang, Y., 2021, In: Journal of Applied Crystallography. 54, 1, 12 p., 54.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Diffraction 100%
  • Contrast 66%
  • Iron 50%
  • Reconstruction 50%
  • Electric Potential 33%
  60 Downloads (Pure)

• Phase development and mechanical response of low-level cement replacements with wood ash and washed wood ash

  Sigvardsen, N. M., Geiker, M. R. & Ottosen, L. M., 2021, In: Construction and Building Materials. 269, 13 p., 121234.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Wood Ash 100%
  • Cement 57%
  • Response 28%
  • Ettringite 14%
  • Combustion 14%
  15 Downloads (Pure)

• Pull-out behaviour of steel fibres in cracked concrete under wet–dry cycles – deterioration phenomena

  Marcos-Meson, V., Solgaard, A., Skovhus, T. L., Jakobsen, U. H., Fischer, G., Edvardsen, C. & Michel, A., 2021, In: Magazine of Concrete Research. 73, 16, p. 843-852

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Fiber 100%
  • Steel Fibre 66%
  • Steel Fiber 66%
  • Mechanical Damage 50%
  • Hooks 50%
  74 Downloads (Pure)

• Rain erosion of wind turbine blades and the effect of air bubbles in the coatings

  Fæster, S., Johansen, N. FJ., Mishnaevsky, L., Kusano, Y., Bech, J. I. & Madsen, M. B., 2021, In: Wind Energy. 24, 10, p. 1071-1082 12 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Wind Turbine 100%
  • Air Bubble 83%
  • Coating 50%
  • Rain Erosion 50%
  • Turbine Blades 33%
  49 Downloads (Pure)

• Recent trends in X‐ray based characterization of nodular cast iron

  Andriollo, T., Xu, C., Zhang, Y., Tiedje, N. S. & Hattel, J. H., 2021, In: Material Design and Processing Communications. 3, 4, 10 p., e212.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Nodular Iron 100%
  • Microstructure 66%
  • Characterization 33%
  • Microscopy 33%
  • Composite Material 33%
  41 Downloads (Pure)
• 2020

  A flexible and standalone forward simulation model for laboratory X‐ray diffraction contrast tomography

  Fang, H., Juul Jensen, D. & Zhang, Y., 2020, In: Acta Crystallographica. Section A: Foundations of Crystallography. 76, 6, 12 p., A76.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Diffraction 100%
  • Contrast 28%
  • Position 28%
  • Sample 28%
  • Defense Mechanism 28%
  53 Downloads (Pure)

• Analysis of the correlation between micro-mechanical fields and fatigue crack propagation path in nodular cast iron

  Andriollo, T., Zhang, Y., Fæster, S. & Kouznetsova, V., 2020, In: Acta Materialia. 188, p. 302-314

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Fatigue Crack 100%
  • Correlation 25%
  • Finite Element Modeling 25%
  • Nucleation Site 16%
  • Crack Propagation Path 16%
  288 Downloads (Pure)

• Characterization of the fiber orientations in non-crimp glass fiber reinforced composites using structure tensor: Paper

  Jeppesen, N., Dahl, V. A., Christensen, A. N., Dahl, A. B. & Mikkelsen, L. P., 2020, In: IOP Conference Series: Materials Science and Engineering. 942, 1, 12 p., 012037.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Image 100%
  • Fibreglass 50%
  • Fiber Orientation 50%
  • Fibre 50%
  • Information 50%
  53 Downloads (Pure)

• Damage evolution around white etching layer during uniaxial loading

  Jessop, C., Ahlström, J., Persson, C. & Zhang, Y., 2020, In: Fatigue and Fracture of Engineering Materials and Structures. 43, 1, p. 201-208

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Strain 100%
  • Crack Initiation 66%
  • Damage Evolution 66%
  • Residual Stress 33%
  • Digital Image Correlation 33%
  171 Downloads (Pure)

• Dataset of non-crimp fabric reinforced composites for an X-ray computer tomography aided engineering process

  Auenhammer, R. M., Mikkelsen, L. P., Asp, L. E. & Blinzler, B. J., 2020, In: Data in Brief. 33, 6 p., 106518.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Finite Element Modeling 100%
  • Computer 66%
  • X Ray 66%
  • Tomography 66%
  • Computers 66%
  85 Downloads (Pure)

• Durability of cracked SFRC exposed to wet-dry cycles of chlorides and carbon dioxide – Multiscale deterioration phenomena

  Marcos Meson, V., Geiker, M. R., Fischer, G., Solgaard, A., Jakobsen, U. H., Danner, T., Edvardsen, C., Skovhus, T. L. & Michel, A., 2020, In: Cement and Concrete Research. 135, 17 p., 106120.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Crack 100%
  • Composite 100%
  • Deterioration 100%
  • Corrosion 66%
  • Steel Fibre 66%

• Experimental Investigation of a Ballastless Asphalt Track Mockup under Vertical Loads

  Bose, T., Zania, V. & Levenberg, E., 2020, In: Construction and Building Materials. 261, 119711.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Strain 100%
  • Asphalt 66%
  • Amplitudes 33%
  • Hydraulics 33%
  • Actuators 33%
  27 Downloads (Pure)

• Low temperature mixed-mode debond fracture and fatigue characterisation of foam core sandwich

  Farshidi, A., Berggreen, C. & Carlsson, L. A., 2020, In: Journal of Sandwich Structures and Materials. 22, 4, p. 1039-1054

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Lower Temperature 100%
  • Impact Toughness 40%
  • Mixed Mode 40%
  • Foam Core 40%
  • Room Temperature 20%
  27 Downloads (Pure)

• Mechanical performance and corrosion damage of steel fibre reinforced concrete – A multiscale modelling approach

  Marcos Meson, V., Fischer, G., Solgaard, A., Edvardsen, C. & Michel, A., 2020, In: Construction and Building Materials. 234, 10 p., 117847.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Steel Fibre 100%
  • Steel Fiber 100%
  • Corrosion Damage 80%
  • Tensiles 60%
  • Fibre-Reinforced Concrete 60%

• Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method

  Xu, C. L., Andriollo, T., Zhang, Y. B., Hernando, J. C., Hattel, J. & Tiedje, N., 2020, In: Scripta Materialia. 178, p. 463 - 467

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Particle 100%
  • Nodular Iron 100%
  • Strain 100%
  • Shear Band 50%
  • Graphite 50%
  40 Downloads (Pure)

• Micromechanisms of leading edge erosion of wind turbine blades: X‐ray tomography analysis and computational studies

  Mishnaevsky, L., Fæster, S., Mikkelsen, L. P., Kusano, Y. & Bech, J. I., 2020, In: Wind Energy. 23, 3, p. 547-562 16 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Coating 100%
  • Particle 75%
  • Surface 50%
  • Tomography 50%
  • Microscopy 25%

• Mixed-mode fracture evaluation of aerospace grade honeycomb core sandwich specimens using the Double Cantilever Beam–Uneven Bending Moment test method

  Saseendran, V. & Berggreen, C., 2020, In: Journal of Sandwich Structures & Materials. 22, 4, p. 991-1018

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Bending Moment Test 100%
  • Impact Toughness 66%
  • Double-Cantilever Beam 66%
  • Beam Specimen 66%
  • Mode Mixity 66%
  293 Downloads (Pure)

• Pull-out behaviour of hooked-end steel fibres in cracked concrete exposed to wet-dry cycles of chlorides and carbon dioxide – Mechanical performance

  Marcos Meson, V., Solgaard, A., Fischer, G., Edvardsen, C. & Michel, A., 2020, In: Construction and Building Materials. 240, 14 p., 117764.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Fiber 100%
  • Steel Fibre 36%
  • Bond Strength 36%
  • Steel Fiber 36%
  • Dry Cycle 27%

• The effect of elevated temperature on the mechanical properties and failure modes of GFRP face sheets and PET foam cored sandwich beams

  Rezaei, M., Karatzas, V., Berggreen, C. & Carlsson, L. A., 2020, In: Journal of Sandwich Structures and Materials. 22, 4, p. 1235-1255

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Temperature 100%
  • Foam 75%
  • Polyethylene Terephthalate 62%
  • Beam 50%
  • Elastic Moduli 25%
• 2019

  Characterization of coal bio ash from wood pellets and low-alkali coal fly ash and use as partial cement replacement in mortar

  Sigvardsen, N. M. & Ottosen, L. M., 2019, In: Cement and Concrete Composites. 95, p. 25-32

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Ash 100%
  • Coal 41%
  • Investigation 25%
  • Boiler 16%
  • Furnace 16%
  2 Downloads (Pure)

• Crack formation within a Hadfield manganese steel crossing nose

  Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C., Zhang, Y. & Juul Jensen, D., 2019, In: Wear. 438, 9 p., 203049.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Crack 100%
  • Manganese Steel 85%
  • Deformation 42%
  • Networks 42%
  • Surfaces 42%
  163 Downloads (Pure)

• Damping analysis of cylindrical composite structures with enhanced viscoelastic properties

  Kliem, M., Høgsberg, J. B., Vanwalleghem, J., Filippatos, A., Hoschützky, S., Fotsing, E-R. & Berggreen, C., 2019, In: Applied Composite Materials. 26, 1, p. 85-113 29 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Yaw 100%
  • Damping Treatment 66%
  • Mechanical Vibration 50%
  • Neutral Plane 33%
  • Cylinder 33%
  450 Downloads (Pure)

• Experimental assessment of the robustness in fire of lightweight ship bulkheads

  Hulin, T., Karatzas, V., Mindykowski, P., Jomaas, G., Berggreen, C., Lauridsen, D. & Dragsted, A., 2019, In: Marine Structures. 64, p. 161-173

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Fires 100%
  • Alternative Material 66%
  • Steel 66%
  • Design 66%
  • Properties 66%
  81 Downloads (Pure)

• Experimental investigation of interfacial crack arrest in sandwich beams subjected to fatigue loading using a novel crack arresting device

  Martakos, G., Andreasen, J. H., Berggreen, C. & Thomsen, O. T., 2019, In: Journal of Sandwich Structures and Materials. 2, 2, p. 401–421

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Beam 100%
  • Crack Arrest 100%
  • Crack 83%
  • Cracks 83%
  • Finite Element Modeling 50%
  339 Downloads (Pure)

• Failure mechanisms in unidirectional self-reinforced biobased composites based on high stiffness PLA fibres

  Goutianos, S., Van der Schueren, L. & Beauson, J., 2019, In: Composites - Part A: Applied Science and Manufacturing. 117, p. 169-179

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Polylactic Acid 100%
  • Polylactide 100%
  • Failure Strain 20%
  • Fiber 20%
  • High Stiffness 20%

• Grain boundary wetting correlated to the grain boundary properties: A laboratory-based multimodal X-ray tomography investigation

  Sun, M., Zhang, Y., Lyckegaard, A., Bachmann, T., Lauridsen, E. M. & Juul Jensen, D., 2019, In: Scripta Materialia. 163, p. 77-81

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Grain Boundary 100%
  • Tomography 66%
  • Energy 50%
  • X Ray 33%
  • Liquid 33%
  98 Downloads (Pure)

• Impact of micro-scale residual stress on in-situ tensile testing of ductile cast iron: Digital volume correlation vs. model with fully resolved microstructure vs. periodic unit cell

  Andriollo, T., Zhang, Y., Fæster, S., Thorborg, J. & Hattel, J., 2019, In: Journal of the Mechanics and Physics of Solids. 125, p. 714-735

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Residual Stress 100%
  • Microscale 55%
  • Microstructure 44%
  • Finite Element Modeling 33%
  • Particle 33%
  117 Downloads (Pure)

• Impact of production parameters on physiochemical characteristics of wood ash for possible utilisation in cement-based materials

  Sigvardsen, N. M., Kirkelund, G. M., Jensen, P. E., Geiker, M. R. & Ottosen, L. M., 2019, In: Resources, Conservation and Recycling. 145, p. 230-240

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Wood Ash 100%
  • Parameter 66%
  • Materials 66%
  • Combustion 50%
  • Mathematical Model 33%
  94 Downloads (Pure)

• Influence of in-plane shear on kink-plane orientation in a unidirectional fibre composite

  Wilhelmsson, D., Mikkelsen, L. P., Fæster, S. & Asp, L. E., 2019, In: Composites - Part A: Applied Science and Manufacturing. 119, p. 283-290 8 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Axis Angle 100%
  • Compressive Strength 40%
  • In-Plane Shear 40%
  • Band Formation 40%
  • Finite Element Modeling 40%
  138 Downloads (Pure)

• Interfacial crack arrest in sandwich beams subjected to fatigue loading using a novel crack arresting device – Numerical modelling

  Martakos, G., Andreasen, J. H., Berggreen, C. & Thomsen, O. T., 2019, In: Journal of Sandwich Structures and Materials. 21, 2, p. 422-438

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Crack Arrest 100%
  • Beam 66%
  • Crack Tip 50%
  • Arresting Crack 50%
  • Crack Propagation 50%
  398 Downloads (Pure)

• Microstructure and residual elastic strain at graphite nodules in ductile cast iron analyzed by synchrotron X-ray microdiffraction

  Zhang, Y. B., Andriollo, T., Fæster, S., Barabash, R., Xu, R., Tiedje, N., Thorborg, J., Hattel, J., Juul Jensen, D. & Hansen, N., 2019, In: Acta Materialia. 167, p. 221-230

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Graphite Nodule 100%
  • Dislocation 75%
  • Elastic Strain 62%
  • Microstructure 37%
  • Strain Field 37%
  96 Downloads (Pure)

• Numerical fracture analysis and model validation for disbonded honeycomb core sandwich composites

  Farshidi, A., Berggreen, C. & Schäuble, R., 2019, In: Composite Structures. 210, p. 231-238

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Energy Release Rate 100%
  • Mode Mixity 100%
  • Cantilever Beam 66%
  • Beam Specimen 66%
  • Properties 66%

• Quantification of plastic shrinkage cracking in mortars using digital image correlation

  Bertelsen, I. M. G., Kragh, C., Cardinaud, G., Ottosen, L. M. & Fischer, G., 2019, In: Cement and Concrete Research. 123, 13 p., 105761.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Mortar 100%
  • Digital Image Correlation 75%
  • Crack 75%
  • Measurement 50%
  • Quantification 50%
  162 Downloads (Pure)

• Quantitative analysis of the influence of synthetic fibres on plastic shrinkage cracking using digital image correlation

  Bertelsen, I. M. G., Ottosen, L. M. & Fischer, G., 2019, In: Construction and Building Materials. 199, p. 124-137

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Plastic Shrinkage 100%
  • Fiber 100%
  • Fibers 100%
  • Polyethylene Fiber 75%
  • Surfaces 75%
  182 Downloads (Pure)

• Shared CFRP activation anchoring method applied to NSMR strengthening of RC beams

  Schmidt, J. W., Christensen, C. O., Goltermann, P. & Hertz, K. D., 2019, In: Composite Structures. 230, 11 p., 111487.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Carbon Fibre Reinforced Polymer 100%
  • Surfaces 66%
  • Activation 66%
  • Surface 66%
  • Reinforcement 66%

• Surface Rotation Correction and Strain Precision of Wide-Angle 2D DIC for Field Use

  Halding, P. S., Christensen, C. O. & Schmidt, J. W., 2019, In: Journal of Bridge Engineering. 24, 4, 12 p., 04019008.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Strain 100%
  • Laboratories 66%
  • Surfaces 66%
  • Surface 66%
  • Fields 50%
  387 Downloads (Pure)

• Trailing edge subcomponent testing for wind turbine blades–Part A: Comparison of concepts

  Rosemeier, M., Antoniou, A., Chen, X., Lahuerta, F., Berring, P. & Branner, K., 2019, In: Wind Energy. 22, 4, p. 487-498 12 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Trailing Edge 100%
  • Testing 100%
  • Boundary Condition 50%
  • Analytical Model 50%
  • Experimental Investigation 50%
  350 Downloads (Pure)

• Understanding progressive failure mechanisms of a wind turbine blade trailing edge section through subcomponent tests and nonlinear FE analysis

  Chen, X., Berring, P., Madsen, S. H., Branner, K. & Semenov, S., 2019, In: Composite Structures. 214, p. 422-438 39 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Failure (Mechanical) 100%
  • Trailing Edge 83%
  • Progressive Failure 66%
  • Buckling 50%
  • Failure Process 50%
  270 Downloads (Pure)

• X-ray tomography data of compression tested unidirectional fibre composites with different off-axis angles

  Wilhelmsson, D., Mikkelsen, L. P., Fæster, S. & Asp, L. E., 2019, In: Data in Brief. 25, 8 p., 104263.

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Fiber 100%
  • Tomography 100%
  • Fiber-Reinforced Composite 50%
  • Carbon Fiber 50%
  • Compression Testing 50%
  281 Downloads (Pure)
• 2018

  A combined experimental/numerical investigation on hygrothermal aging of fiber-reinforced composites

  Rocha, I. B. C. M., van der Meer, F. P., Raijmaekers, S., Lahuerta, F., Nijssen, R. P. L., Mikkelsen, L. P. & Sluys, L. J., 2018, In: European Journal of Mechanics A - Solids. 73, p. 407-419

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Aging 100%
  • Aging of Materials 100%
  • Cohesive Zone Model 50%
  • Submerging 50%
  • Degradation 50%
  463 Downloads (Pure)

• A modified DCB-UBM test method for interfacial fracture toughness characterization of sandwich composites

  Berggreen, C., Saseendran, V. & Carlsson, L. A., 2018, In: Engineering Fracture Mechanics. 203, p. 208-223 16 p.

  Research output: Contribution to journal › Journal article › Research › peer-review

  • Test Method 100%
  • Impact Toughness 100%
  • Fracture Toughness 100%
  • Double-Cantilever Beam 60%
  • Face Sheet 60%

• Experimental study of the performance of intumescent coatings exposed to standard and non-standard fire conditions

  Lucherini, A., Giuliani, L. & Jomaas, G., 2018, In: Fire Safety Journal. 95, p. 42-50

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • Heating Rate 100%
  • Coating 80%
  • Standard 80%
  • Coating Agent 80%
  • Fire Condition 40%
  254 Downloads (Pure)

• Ex-situ X-ray computed tomography, tension clamp and in-situ transilluminated white light imaging data of non-crimp fabric based fibre composite under fatigue loading

  Jespersen, K. M., Glud, J. A., Zangenberg, J., Hosoi, A., Kawada, H. & Mikkelsen, L. P., 2018, In: Data in Brief. 21, p. 228-233

  Research output: Contribution to journal › Journal article › Research › peer-review

  Open Access

  File

  • X Ray 100%
  • Fiber Composite 66%
  • Fibers 66%
  • Light 66%
  • Fatigue Loading 66%
  405 Downloads (Pure)