• Nils Koppels Allé, 403, 110

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Ph.D. thesis
2019

Design and Performance Analysis of Plate Heat Exchangers for Heat Pumps using Pure and Mixed Refrigerants

Mancini, R., 2019, Kgs. Lyngby, Denmark: Technical University of Denmark. 170 p.

Research output: Book/ReportPh.D. thesis

Open Access
File
20 Downloads (Pure)

High-performance heat pump systems: Enhancing performance and range of heat pump systems for industry and district heating

Zühlsdorf, B., 2019, Kgs. Lyngby: Technical University of Denmark. 322 p. (DCAMM Special Report; No. S261).

Research output: Book/ReportPh.D. thesis

Open Access
File
55 Downloads (Pure)
2018

Design and Optimization of Turbomachinery for Thermodynamic Cycles Utilizing Low-Temperature Heat Sources

Meroni, A., 2018, Kgs. Lyngby: Technical University of Denmark. 245 p. (DCAMM Special Report; No. S251).

Research output: Book/ReportPh.D. thesis

Open Access
File
124 Downloads (Pure)

Energy efficiency in the industry: A study of the methods, potentials and interactions with the energy system

Bühler, F., 2018, Technical University of Denmark. 291 p. (DCAMM Special Report; No. S235).

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
224 Downloads (Pure)
2017

Analysis of a solid desiccant cooling system with indirect evaporative cooling

Bellemo, L., 2017, Kgs. Lyngby: Technical University of Denmark. 196 p. (DCAMM Special Report; No. S232).

Research output: Book/ReportPh.D. thesis

Open Access
File
367 Downloads (Pure)
Open Access
File
1017 Downloads (Pure)
2016

Design and optimization of flexible multi-generation systems

Lythcke-Jørgensen, C. E., 2016, Kgs. Lyngby: Technical University of Denmark. 298 p. (DCAMM Special Report; No. S218).

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
294 Downloads (Pure)

Experimental Study of Liquid Fuel Spray Combustion

Westlye, F. R., 2016, Kgs. Lyngby: Technical University of Denmark. 82 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
615 Downloads (Pure)
Open Access
File
860 Downloads (Pure)

Modeling and Evaluation of Bioenergy and Agriculture System Integration

Sigurjonsson, H. Æ., 2016, Kgs. Lyngby: Technical University of Denmark. 272 p. (DCAMM Special Report; No. S227).

Research output: Book/ReportPh.D. thesis

Open Access
File
98 Downloads (Pure)

Tank designs for combined high pressure gas and solid state hydrogen storage

Mazzucco, A., 2016, Kgs. Lyngby: Technical University of Denmark. 193 p. (DCAMM Special Report; No. S197).

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
827 Downloads (Pure)
2015

Design and Modelling of Small Scale Low Temperature Power Cycles

Wronski, J., 2015, Kgs. Lyngby: DTU Mechanical Engineering. 387 p. (DCAMM Special Report; No. S190).

Research output: Book/ReportPh.D. thesis

Open Access
File
1879 Downloads (Pure)
Open Access
File
1811 Downloads (Pure)

Novel design methods and control strategies for oil and gas offshore power systems

Pierobon, L., 2015, Kgs. Lyngby: Technical University of Denmark. 184 p. (DCAMM Special Report; No. S83).

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
705 Downloads (Pure)

Numerical evaluation of the Kalina cycle for concentrating solar power plants

Modi, A., 2015, DTU Mechanical Engineering. 192 p. (DCAMM Special Report; No. S188).

Research output: Book/ReportPh.D. thesis

Open Access
File
1409 Downloads (Pure)

The Influence of Fuel Sulfur on the Operation of Large Two-Stroke Marine Diesel Engines

Cordtz, R. F., 2015, DTU Mechanical Engineering. 108 p. (DCAMM Special Report; No. S185).

Research output: Book/ReportPh.D. thesis

Open Access
File
864 Downloads (Pure)
2014

Modelling, analysis and optimisation of energy systems on offshore platforms

Nguyen, T-V., 2014, DTU Mechanical Engineering. 428 p. (DCAMM Special Report; No. S170).

Research output: Book/ReportPh.D. thesis

Open Access
File
2366 Downloads (Pure)
2013

Application of Dimethyl Ether in Compression Ignition Engines

Hansen, K. R., 2013, Kgs. Lyngby: Technical University of Denmark. 164 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
647 Downloads (Pure)

Dynamic Performance of a PEM Fuel Cell System

Rabbani, R. A., 2013, DTU Mechanical Engineering. 288 p. (DCAMM Special Report; No. S154).

Research output: Book/ReportPh.D. thesis

Open Access
File
1337 Downloads (Pure)
2012

Fuel Cell Hydroge Manifold for Lift Trucks

Hosseinzadeh, E., 2012, Kgs. Lyngby: Technical University of Denmark. 278 p.

Research output: Book/ReportPh.D. thesis

Open Access
File
446 Downloads (Pure)

Modeling and Design of Hybrid PEM Fuel Cell Systems for Lift Trucks

Hosseinzadeh, E., 2012, DTU Mechanical Engineering. 254 p.

Research output: Book/ReportPh.D. thesis

Open Access
File
3074 Downloads (Pure)
2011

Analysis of flow maldistribution in fin-and-tube evaporators for residential air-conditioning systems

Kærn, M. R., Aug 2011, Kgs. Lyngby, Denmark: Technical University of Denmark. 225 p. (DCAMM Special Report; No. S132).

Research output: Book/ReportPh.D. thesis

Open Access
File
2376 Downloads (Pure)

Design of novel DME/methanol synthesis plants based on gasification of biomass

Clausen, L. R., Sep 2011, Kgs. Lyngby, Denmark: Technical University of Denmark. (DCAMM Special Report; No. S123).

Research output: Book/ReportPh.D. thesis

Open Access
File
3918 Downloads (Pure)
2010

Design and Optimization of an Integrated Biomass Gasification and Solid Oxide Fuel Cell System

Bang-Møller, C., Sep 2010, Kgs. Lyngby, Denmark: Technical University of Denmark. (DCAMM Special Report; No. S112).

Research output: Book/ReportPh.D. thesis

Open Access
File
2187 Downloads (Pure)

Modelling refrigerant distribution in minichannel evaporators

Brix, W., Sep 2010, Kgs. Lyngby, Denmark: Technical University of Denmark. 196 p. (DCAMM Special Report; No. S114).

Research output: Book/ReportPh.D. thesis

Open Access
File
927 Downloads (Pure)