• Nils Koppels Alle, 404, 112

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Journal article
2020

3D study of plastic flow localization at a void-sheet

Tvergaard, V. & Legarth, B. N., 2020, In : International Journal of Mechanical Sciences. 173, 9 p., 105426.

Research output: Contribution to journalJournal articleResearchpeer-review

A 3D Approach for THD Lubrication in Tilting Pad Journal Bearing—Theory and Experiment

Bizarre, L., Andersen, T. B., Daniel, G. B., Santos, I. F. & Cavalca, K. L., 2020, In : Tribology Transactions. 63, 1, p. 120-132

Research output: Contribution to journalJournal articleResearchpeer-review

A framework for topology optimization of inertial microfluidic particle manipulators

Andreasen, C. S., 2020, (Accepted/In press) In : Structural and Multidisciplinary Optimization.

Research output: Contribution to journalJournal articleResearchpeer-review

An experimental and theoretical approach of a pinned and a conventional ball bearing for active magnetic bearings

Fonseca, C. A., Santos, I. & Weber, H. I., 2020, In : Mechanical Systems and Signal Processing. 138, 106541.

Research output: Contribution to journalJournal articleResearchpeer-review

A Review of Topology Optimisation for Fluid-Based Problems

Alexandersen, J. & Andreasen, C. S., 2020, In : Fluids . 5, 1, 33 p., 29.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
89 Downloads (Pure)

A simple characterization of H-convergence for a class of nonlocal problems

Bellido, J. C. & Evgrafov, A., 2020, (Accepted/In press) In : Revista Matemática Complutense.

Research output: Contribution to journalJournal articleResearchpeer-review

Calibration and Balancing of Multiple Tuned Mass Absorbers for Damping of Coupled Bending-Torsion Beam Vibrations

Hoffmeyer, D. & Høgsberg, J., 2020, In : Journal of Vibration and Acoustics. 142, 4, 8 p., 044501.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
9 Downloads (Pure)

Coexistence of infinitely many large, stable, rapidly oscillating periodic solutions in time-delayed Duffing oscillators

Fiedler, B., Nieto, A. L., Rand, R. H., Sah, S. M., Schneider, I. & de Wolff, B., 2020, In : Journal of Differential Equations. 268, 10, p. 5969-5995

Research output: Contribution to journalJournal articleResearchpeer-review

Consistent frequency-matching calibration procedure for electromechanical shunt absorbers

Høgsberg, J., 2020, (Accepted/In press) In : Journal of Vibration and Control.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
4 Downloads (Pure)

Damping of coupled bending-torsion beam vibrations by spatially filtered warping position feedback

Hoffmeyer, D. & Høgsberg, J., 2020, In : Journal of Sound and Vibration. 477, 16 p., 115323.

Research output: Contribution to journalJournal articleResearchpeer-review

Damping of torsional vibrations in thin-walled beams by viscous bimoments

Hoffmeyer, D. & Høgsberg, J., 2020, (Accepted/In press) In : Mechanics of Advanced Materials and Structures.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
12 Downloads (Pure)

De-homogenization of optimal multi-scale 3D topologies

Groen, J. P., Stutz, F. C., Aage, N., Bærentzen, J. A. & Sigmund, O., 2020, In : Computer Methods in Applied Mechanics and Engineering. 364, 129 p., 112979.

Research output: Contribution to journalJournal articleResearchpeer-review

Effect of superimposed compressive stresses on rolling contact fatigue initiation at hard and soft inclusions

Mahdavi, H., Poulios, K. & Niordson, C. F., 2020, In : International Journal of Fatigue. 134, 9 p., 105399.

Research output: Contribution to journalJournal articleResearchpeer-review

Full three dimensional cavitation instabilities using a non-quadratic anisotropic yield function

Legarth, B. N. & Tvergaard, V., 2020, In : Journal of Applied Mechanics. 87, 3, 10 p., 031009.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
45 Downloads (Pure)

Fundamental differences between plane strain bending and far-field plane strain tension in ductile plate failure

Andersen, R. G., Londono, J. G., Woelke, P. B. & Nielsen, K. L., 2020, In : Journal of the Mechanics and Physics of Solids. 141, 17 p., 103960.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
11 Downloads (Pure)

Improving the efficiency of upconversion by light concentration using nanoparticle design: Topical Review

Madsen, S. P., Christiansen, J., Christiansen, R. E., Vester-Petersen, J., Møller, S. H., Lakhotiya, H., Nazir, A., Eriksen, E., Roesgaard, S., Sigmund, O., Lissau, J. S., Destouesse, E., Madsen, M., Julsgaard, B. & Balling, P., 2020, In : Journal of Physics D: Applied Physics. 53, 7, 39 p., 073001.

Research output: Contribution to journalJournal articleResearchpeer-review

Inverse design of nanoparticles for enhanced Raman scattering

Christiansen, R. E., Michon, J., Benzaouia, M., Sigmund, O. & Johnson, S. G., 2020, In : Optics Express. 28, 4, p. 4444-4462

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
43 Downloads (Pure)

Isotropic “Quasi‐Fluid” Metamaterials Designed by Topology Optimization

Zhang, H., Kang, Z., Wang, Y. & Wu, W., 2020, In : Advanced Theory and Simulations. 3, 1, 7 p., 1900182.

Research output: Contribution to journalJournal articleResearchpeer-review

Level set topology and shape optimization by density methods using cut elements with length scale control

Andreasen, C. S., Elingaard, M. O. & Aage, N., 2020, (Accepted/In press) In : Structural and Multidisciplinary Optimization.

Research output: Contribution to journalJournal articleResearchpeer-review

Low temperature mixed-mode debond fracture and fatigue characterisation of foam core sandwich

Farshidi, A., Berggreen, C. & Carlsson, L. A., 2020, In : Journal of Sandwich Structures and Materials. 22, 4, p. 1039-1054

Research output: Contribution to journalJournal articleResearchpeer-review

LRLC-shunted piezoelectric vibration absorber

Berardengo, M., Høgsberg, J., Manzoni, S., Vanali, M., Brandt, A. & Godi, T., 2020, In : Journal of Sound and Vibration. 474, 19 p., 115268.

Research output: Contribution to journalJournal articleResearchpeer-review

Mixed-mode fracture evaluation of aerospace grade honeycomb core sandwich specimens using the Double Cantilever Beam–Uneven Bending Moment test method

Saseendran, V. & Berggreen, C., 2020, In : Journal of Sandwich Structures & Materials. 22, 4, p. 991-1018

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
99 Downloads (Pure)

Mode mixity analysis of face/core debonds in a single cantilever beam sandwich specimen

Saseendran, V., Berggreen, C. & Krueger, R., 2020, (Accepted/In press) In : Journal of Sandwich Structures and Materials. 31 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Multi-domain stability and modal analysis applied to Gas Foil Bearings: Three approaches

Osmanski, S. V., Larsen, J. S. & Santos, I. F., 2020, In : Journal of Sound and Vibration. 472, 24 p., 115174.

Research output: Contribution to journalJournal articleResearchpeer-review

Nonlinear compressive stability of hyperelastic 2D lattices at finite volume fractions

Bluhm, G. L., Sigmund, O., Wang, F. & Poulios, K., 2020, In : Journal of the Mechanics and Physics of Solids. 137, 19 p., 103851.

Research output: Contribution to journalJournal articleResearchpeer-review

Numerical investigation of stiffness and buckling response of simple and optimized infill structures

Wang, F. & Sigmund, O., 2020, (Accepted/In press) In : Structural and Multidisciplinary Optimization.

Research output: Contribution to journalJournal articleResearchpeer-review

On topology optimization with elliptical masks and honeycomb tessellation with explicit length scale constraints

Singh, N., Kumar, P. & Saxena, A., 2020, (Accepted/In press) In : Structural and Multidisciplinary Optimization.

Research output: Contribution to journalJournal articleResearchpeer-review

Perturbation-based prediction of vibration phase shift along fluid-conveying pipes due to Coriolis forces, nonuniformity, and nonlinearity

Thomsen, J. J. & Fuglede, N., 2020, In : Nonlinear Dynamics. 99, p. 173–199

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
6 Downloads (Pure)

Phase field fracture modelling using quasi-Newton methods and a new adaptive step scheme

Kristensen, P. K. & Martínez Pañeda, E., 2020, In : Theoretical and Applied Fracture Mechanics. 107, 13 p., 102446.

Research output: Contribution to journalJournal articleResearchpeer-review

Quasiperiodic mechanical metamaterials with extreme isotropic stiffness

Wang, Y. & Sigmund, O., 2020, In : Extreme Mechanics Letters. 34, 6 p., 100596.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
16 Downloads (Pure)

Shape preserving design of thermo-elastic structures considering geometrical nonlinearity

Zhu, J., Li, Y., Wang, F. & Zhang, W., 2020, (Accepted/In press) In : Structural and Multidisciplinary Optimization.

Research output: Contribution to journalJournal articleResearchpeer-review

Spectrally smooth and spatially uniform sound radiation from a thin plate structure using band gaps

Jung, J., Jeong, C-H. & Jensen, J. S., 2020, In : Journal of Sound and Vibration. 471, 17 p., 115187.

Research output: Contribution to journalJournal articleResearchpeer-review

Strongly enhanced upconversion in trivalent erbium ions by tailored gold nanostructures: Toward high-efficient silicon-based photovoltaics

Christiansen, J., Vester-Petersen, J., Roesgaard, S., Møller, S. H., Christiansen, R. E., Sigmund, O., Madsen, S. P., Balling, P. & Julsgaard, B., 2020, In : Solar Energy Materials and Solar Cells. 208, 7 p., 110406.

Research output: Contribution to journalJournal articleResearchpeer-review

Systematic design of high-Q prestressed micro membrane resonators

Gao, W., Wang, F. & Sigmund, O., 2020, In : Computer Methods in Applied Mechanics and Engineering. 361, 112692.

Research output: Contribution to journalJournal articleResearchpeer-review

The effect of elevated temperature on the mechanical properties and failure modes of GFRP face sheets and PET foam cored sandwich beams

Rezaei, M., Karatzas, V., Berggreen, C. & Carlsson, L. A., 2020, In : Journal of Sandwich Structures and Materials. 22, 4, p. 1235-1255

Research output: Contribution to journalJournal articleResearchpeer-review

Time simulation of aerodynamic response of long-span bridges to turbulent wind

Møller, R. N., Krenk, S. & Svendsen, M. N., 2020, In : Journal of Wind Engineering and Industrial Aerodynamics. 199, 16 p., 104060.

Research output: Contribution to journalJournal articleResearchpeer-review

Topology optimization of compliant mechanisms considering stress constraints, manufacturing uncertainty and geometric nonlinearity

Assis da Silva, G., Beck, A. T. & Sigmund, O., 2020, In : Computer Methods in Applied Mechanics and Engineering. 365, 31 p., 112972.

Research output: Contribution to journalJournal articleResearchpeer-review

Topology optimization of fluidic pressure-loaded structures and compliant mechanisms using the Darcy method

Kumar, P., Frouws, J. S. & Langelaar, M., 2020, In : Structural and Multidisciplinary Optimization. 61, p. 1637–1655

Research output: Contribution to journalJournal articleResearchpeer-review

Towards solving large-scale topology optimization problems with buckling constraints at the cost of linear analyses

Ferrari, F. & Sigmund, O., 2020, In : Computer Methods in Applied Mechanics and Engineering. 363, 19 p., 112911.

Research output: Contribution to journalJournal articleResearchpeer-review

Transverse vibrations of tightened bolts: Simplified modeling of tension-dependent boundary stiffness and damping

Sah, S. M., Thomsen, J. J. & Fidlin, A., 2020, In : Engineering Structures. 205, 110049.

Research output: Contribution to journalJournal articleResearchpeer-review

Unbounded sequences of stable limit cycles in the delayed Duffing equation: an exact analysis

Sah, S. M., Fiedler, B., Shayak, B. & Rand, R. H., 2020, (Submitted) In : ArXiv.

Research output: Contribution to journalJournal articleResearchpeer-review

Vibration control by piezoelectric proof-mass absorber with resistive-inductive shunt

Høgsberg, J., 2020, (Accepted/In press) In : Mechanics of Advanced Materials and Structures.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
12 Downloads (Pure)
2019

A density-based topology optimization methodology for thermal energy storage systems

Lundgaard, C., Engelbrecht, K. & Sigmund, O., 2019, In : Structural and Multidisciplinary Optimization. 60, 6, p. 2189-2204 16 p.

Research output: Contribution to journalJournal articleResearchpeer-review

A homogenized model for size-effects in porous metals

Niordson, C. F. & Tvergaard, V., 2019, In : Journal of the Mechanics and Physics of Solids. 123, p. 222-233

Research output: Contribution to journalJournal articleResearchpeer-review

An experimental investigation of the flexural strength of soda–lime–silica glass at high loading rates

Meyland, M. J., Bønding, C. K. T., Eriksen, R. N. W. & Nielsen, J. H., 2019, In : Glass Structures & Engineering. 4, 2, p. 175-183

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
86 Downloads (Pure)

An investigation of back stress formulations under cyclic loading

El-Naaman, S. A., Nielsen, K. L. & Niordson, C. F., 2019, In : Mechanics of Materials. 130, p. 76-87

Research output: Contribution to journalJournal articleResearchpeer-review