• Nils Koppels Alle, 404, 112

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Paper
2018

New piezoelectric shunt tuning method based on the effective electromechanical coupling coefficient: Validation and 3D implementation

Toftekær, J. F., Benjeddou, A. & Høgsberg, J., 2018. 12 p.

Research output: Contribution to conferencePaperResearchpeer-review

On the feasibility of utilizing vibrations for bolted joint assessment

Tcherniak, D. & Thomsen, J. J., 2018. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

29 Downloads (Pure)

Vibration Control by RL Shunted Piezoelectric Proof-Mass Absorbers

Høgsberg, J. B., 2018. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

2017

Debond fracture characterization in sandwich composites under arctic low temperature conditions

Farshidi, A. & Berggreen, C., 2017. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
35 Downloads (Pure)

Fracture Characterization of PVC Foam Core Sandwich Specimen Using the DCB-UBM Test Method

Saseendran, V., Berggreen, C. & Carlsson, L. A., 2017. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
102 Downloads (Pure)

Numerical modelling of the bonding process for wind turbine blades: model validation

Uzal, A., Spangenberg, J., W. Nielsen, M., Sonne, M. R. & Hattel, J. H., 2017. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
113 Downloads (Pure)
2015

Experimental Identification of Dynamic Coefficients of Tilting-Pad Bearings with Active Lubrication

Salazar, J. A. G., Cerda Varela, A. J. & Santos, I., 2015. 14 p.

Research output: Contribution to conferencePaperResearchpeer-review

File
843 Downloads (Pure)

On the Numerical Simulation of Nonlinear Transient Behavior of Compliant Air Foil Bearings

Larsen, J. S., Nielsen, B. B. & Santos, I., 2015.

Research output: Contribution to conferencePaperResearchpeer-review

2014

Comparing the Gauss-Seidel and Jacobi Relaxation Schemes in the Solution of the EHL Line Contact Problem Using a Multigrid solver

Janakiraman, S. & Klit, P., 2014. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

File
429 Downloads (Pure)

Laboratory Simulation of Rolling Contact Fatigue Cracks in Wind Turbine Bearings Using Hydrogen Infused 100Cr6 Bearing Steel

Janakiraman, S., West, O., Klit, P. & Jensen, N. S., 2014. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

File
460 Downloads (Pure)

Optimal design of hardening and softening resonances of plane frame structures: Extended abstract

Dou, S. & Jensen, J. S., 2014. 2 p.

Research output: Contribution to conferencePaperResearchpeer-review

File
215 Downloads (Pure)
2013

Compliant Foil Journal Bearings - Investigation of Dynamic Properties

Larsen, J. S. & Santos, I., 2013. 12 p.

Research output: Contribution to conferencePaperResearchpeer-review

1 Downloads (Pure)
2012

A Family of Resonant Vibration Control Formats

Krenk, S. & Høgsberg, J. B., 2012. 8 p.

Research output: Contribution to conferencePaperResearchpeer-review

File
109 Downloads (Pure)

Condition monitoring with ordinary wind turbine SCADA data – A neuro-fuzzy approach

Schlechtingen, M. & Santos, I., 2012. 9 p.

Research output: Contribution to conferencePaperResearch

File
1820 Downloads (Pure)

Optimizing the microstructure of dissipative materials

Andreassen, E., Lazarov, B. S. & Jensen, J. S., 2012.

Research output: Contribution to conferencePaperResearch

Open Access
File
88 Downloads (Pure)

Parametric Study of the Device Angle Dependency of a Single Vortex Generator on a Flat Plate

Fernandez, U., Réthoré, P-E., Sørensen, N. N., Velte, C. M., Zahle, F. & Egusquiza, E., 2012. 15 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
599 Downloads (Pure)

Topology optimization of antennas and resonators

Aage, N. & Sigmund, O., 2012.

Research output: Contribution to conferencePaperResearch

Open Access
File
210 Downloads (Pure)
2010

Investigation of piston ring – cylinder liner dry wear using a block-on-ring test rig

Bihlet, U., Klit, P., Felter, C. L. & Vølund, A., 2010. 7 p.

Research output: Contribution to conferencePaperResearch

File
1153 Downloads (Pure)
2007

Tailoring group velocity by topology optimization

Stainko, R. & Sigmund, O., 2007.

Research output: Contribution to conferencePaperResearch

Topology optimization of fluid mechanics problems

Gersborg-Hansen, A., 2007.

Research output: Contribution to conferencePaperResearchpeer-review