• Nils Koppels Alle, 404, 112

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Report
2015

Vindbranchens vækstlag

Nielsen, N. A., Molzen, J. E., Pedersen, A. L., Siggaard Knudsen, S., Andersen, M., Holck, A., Thomsen, K., Buhl, T., Pedersen, N. L. & Holbøll, J., 2015, Technical University of Denmark. 33 p.

Research output: Book/ReportReport

Open Access
File
155 Downloads (Pure)
2014
1190 Downloads (Pure)
2013

Topology Optimisation for Coupled Convection Problems

Alexandersen, J., Sigmund, O., Andreasen, C. S. & Aage, N., 2013, DTU Mechanical Engineering. 159 p.

Research output: Book/ReportReport

Open Access
File
1392 Downloads (Pure)
2012

Parallel Sparse Matrix - Vector Product: Pure MPI and hybrid MPI-OpenMP implementation

Alexandersen, J., Lazarov, B. S. & Dammann, B., 2012, Kgs. Lyngby: Technical University of Denmark. 61 p. (D T U Compute. Technical Report; No. 2012-10).

Research output: Book/ReportReport

Open Access
File
1451 Downloads (Pure)

Structural Optimization of Wind Turbine Rotor Blades by Multi-Level Sectional/Multibody/3DFEM Analysis

Bottasso, C. L., Campagnolo, F., Croce, A., Dilli, S., Gualdoni, F. & Nielsen, M. B., 2012, Politecnico Di Milano. 27 p.

Research output: Book/ReportReport

2011

Topology Optimization for Convection Problems

Alexandersen, J., 2011, 97 p.

Research output: Book/ReportReport

Open Access
File
638 Downloads (Pure)

Stress Concentrations in Keyways and Optimization of Keyway design

Pedersen, N. L., 2010, Kgs. Lyngby, Denmark: Technical University of Denmark. 18 p. (DCAMM reports; No. 743).

Research output: Book/ReportReport

2009

Bolt-Plate Contact Assemblies with Prestress and External Loads

Pedersen, N. L. & Pedersen, P., 2009, Kgs. Lyngby, Denmark. 20 p. (DCAMM reports; No. 740).

Research output: Book/ReportReport

Effect of material parameters in the Izod test for polymers

Tvergaard, V. & Needleman, A., 2008, Kgs.Lyngby: DTU Mekanik.

Research output: Book/ReportReport

Design of Bolt-Plate Contact Assemblies

Pedersen, N. L. & Pedersen, P., 2007, Kgs. Lyngby: DCAMM, Technical University of Denmark. 20 p. (DCAMM reports; No. 725).

Research output: Book/ReportReport

Design of Notches and Grooves

Pedersen, N. L. & Pedersen, P., 2007, Kgs. Lyngby: DCAMM, Technical University of Denmark. 20 p. (DCAMM reports; No. 730).

Research output: Book/ReportReport

Discrete modelling of ductile crack growth by void growth to coalescence

Tvergaard, V., 2007, Department of Mechanical Engineering, Solid Mechanics, DTU: Technical University of Denmark.

Research output: Book/ReportReport

Effect of shape on unstable growth of cavities interacting with surrounding small voids

Tvergaard, V., 2007, Department of Mechanical Engineering, Solid Mechanics: Technical University of Denmark.

Research output: Book/ReportReport

Nontrivial effects of high-frequency excitation for strongly damped mechanical systems

Fidlin, A. & Thomsen, J. J., 2007, Kgs. Lyngby, Copenhagen: Technical University of Denmark. 16 p. (DCAMM Report; No. 731).

Research output: Book/ReportReport

Size-effects at a crack-tip interacting with a number of voids

Tvergaard, V. & Niordson, C. F., 2007, Department of Mechanical Engineering, Solid Mechanics: Technical University of Denmark.

Research output: Book/ReportReport

On Prestress Stiffness Analysis of Bolt-Plate Contact Assemblies

Pedersen, N. L. & Pedersen, P., 2006, Kgs. Lyngby, Denmark: DCAMM, Technical University of Denmark. 20 p. (DCAMM reports; No. 719).

Research output: Book/ReportReport

On simultaneous shape and orientational design for eigenfrequency optimization

Pedersen, N. L., 2006, Kgs. Lyngby, Denmark: DCAMM, Technical University of Denmark. 24 p. (DCAMM reports; No. 714).

Research output: Book/ReportReport

Parallel solution of systems of linear equations generated by COMSOL 3.2 using the Sun Performance Library

Gersborg-Hansen, A., Dammann, B., Aage, N. & Poulsen, T. H., 2006, Technical University of Denmark. (MAT-report; No. 2006-05).

Research output: Book/ReportReport

Open Access
File
453 Downloads (Pure)

Plasticity size effects in voided crystals

Hussein, M. I., Borg, U., Niordson, C. F. & Deshpande, V. S., 2006, Technical University of Denmark.

Research output: Book/ReportReport

Void growth to coalescence in a non-local material

Niordson, C. F., 2006, DCAMM, Technical University of Denmark. (Uden navn; No. Report no. 722).

Research output: Book/ReportReport

2005

Debonding or breakage of short fibres in a metal matrix composite

Tvergaard, V., 2005, Dept. of Mechanical Engineering, Solid Mechanics, DTU.

Research output: Book/ReportReport

Effects of texture on shear band formation in plane strain tension/compression and bending

Kuroda, M. & Tvergaard, V., 2005, Yamagata University, Japan.

Research output: Book/ReportReport

Influence of porosity on cavitation instability predictions for elastic-plastic solids

Tvergaard, V. & Vadillo, G., 2005, Dept. of Mechanical Engineering, Solid Mechanics, DTU.

Research output: Book/ReportReport

Size-effects on cavitation instabilities

Niordson, C. F. & Tvergaard, V., 2005, (DCAMM; No. 707).

Research output: Book/ReportReport

Slow high-frequency effects in mechanics: problems, solutions, potentials

Thomsen, J. J., 2005, Kgs. Lyngby: Technical University of Denmark. 26 p. (DCAMM Report; No. 701).

Research output: Book/ReportReport

Three dimensional microstructural effects on plane strain ductile crack growth

Tvergaard, V. & Needleman, A., 2005, Brown University, Division of Engineering, USA.

Research output: Book/ReportReport

2003

3D analyses of the effect of weld orientation in Charpy specimens

Tvergaard, V. & Needleman, A., 2003

Research output: Book/ReportReport