• Nils Koppels Alle, 404, 112

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

2019

A periodic linear–quadratic controller for suppressing rotor-blade vibration

Camino, J. F. & Santos, I. F., 2019, In : Journal of Vibration and Control. 25, 17, p. 2351–2364

Research output: Contribution to journalJournal articleResearchpeer-review

A potential for higher-order phenomenological strain gradient plasticity to predict reliable response under non-proportional loading

Panteghini, A., Bardella, L. & Niordson, C. F., 2019, In : Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 475, 2229, 21 p., 20190258.

Research output: Contribution to journalJournal articleResearchpeer-review

Application of OMA techniques to LTP systems

Deon, M., Santos, I. F. & Coppotelli, G., 2019, Proceedings of the 8th Iomac - International Operational Modal Analysis Conference. p. 577-589

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A simple method for coupled acoustic-mechanical analysis with application to gradient-based topology optimization

Jensen, J. S., 2019, In : Structural and Multidisciplinary Optimization. 59, 5, p. 1567–1580

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
40 Downloads (Pure)

Aspects of Multi-pass GTAW of Low Alloyed Steels

Somlo, K. & Sziebig, G., 2019, In : IFAC-PapersOnLine. 52, 22, p. 101-107 7 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
15 Downloads (Pure)

A steady-state modeling framework incorporating the Kuroda–Tvergaard model: demonstrated on single crystal crack growth

Juul, K. J., El-Naaman, S. A., Nielsen, K. L. & Niordson, C. F., 2019, In : Archive of Applied Mechanics. 89, 10, p. 2133–2145

Research output: Contribution to journalJournal articleResearchpeer-review

A stress-based topology optimization method for heterogeneous structures

Conlan-Smith, C. & James, K. A., 2019, In : Structural and Multidisciplinary Optimization. 60, 1, p. 167-183

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Automated wind turbine gearbox bearing diagnosis algorithm based on vibration data analysis and signal pre-whitening

Schlechtingen, M. & Santos, I., 2019, Proceedings of 13th SIRM: The 13th International Conference on Dynamics of Rotating Machinery. Kgs. Lyngby: Technical University of Denmark, p. 88-114

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
52 Downloads (Pure)

Automatic Design of Soft Dielectric Elastomer Actuators With Optimal Spatial Electric Fields

Chen, F., Liu, K., Wang, Y., Zou, J., Gu, G. & Zhu, X., 2019, In : IEEE Transactions on Robotics. 35, 5, p. 1150-1165

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
16 Downloads (Pure)

Axially variable-length solid element of absolute nodal coordinate formulation

Sun, J., Tian, Q., Hu, H. & Pedersen, N. L., 2019, In : Acta Mechanica Sinica. 35, p. 653–663

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

A “poor man’s” approach for high-resolution three-dimensional topology design for natural convection problems

Pollini, N., Sigmund, O., Andreasen, C. S. & Alexandersen, J., 2019, In : Advances in Engineering Software. 140, 18 p., 102736.

Research output: Contribution to journalJournal articleResearchpeer-review

A “poor man’s” approach to topology optimization of natural convection problems

Asmussen, J., Alexandersen, J., Sigmund, O. & Andreasen, C. S., 2019, In : Structural and Multidisciplinary Optimization. 59, 4, p. 1105-1124

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Backcalculation of Raptor (RWD) Measurements and Forward Prediction of FWD Deflections Compared with FWD Measurements

Madsen, S. S. & Pedersen, N. L., 2019, Proceedings of the International and Highway Pavements Conference. American Society of Civil Engineers, p. 382-391

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Composite Materials for Electrical Transmission Mast Structures

Manouchehr, M., 2019, Kgs. Lyngby: Technical University of Denmark. 87 p. (DCAMM Special Report; No. S260).

Research output: Book/ReportPh.D. thesis

Open Access
File
40 Downloads (Pure)

Cruciform Specimen Designs for Planar Biaxial Fatigue Testing in Composites

Moncy, A., Castro, O. & Berggreen, C., 2019, Proceedings of 22nd International Conference on Composite Materials. 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
40 Downloads (Pure)

Damping analysis of cylindrical composite structures with enhanced viscoelastic properties

Kliem, M., Høgsberg, J. B., Vanwalleghem, J., Filippatos, A., Hoschützky, S., Fotsing, E-R. & Berggreen, C., 2019, In : Applied Composite Materials. 26, 1, p. 85-113 29 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
136 Downloads (Pure)

Damping of Torsional Beam Vibrations

Hoffmeyer, D., 2019, Kgs. Lyngby: Technical University of Denmark. 172 p. (DCAMM Special Report; No. S263).

Research output: Book/ReportPh.D. thesis

Open Access
File
20 Downloads (Pure)

Damping system for long‐span suspension bridges

Nøhr Møller, R., Krenk, S. & Svendsen, M. N., 2019, In : Structural Control and Health Monitoring. 26, 12, 23 p., e2448.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
65 Downloads (Pure)

Designing Manufacturable Photonic and Plasmonic Structures using Topology Optimization

Christiansen, R. E. & Sigmund, O., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
106 Downloads (Pure)

Designing photonic topological insulators with quantum-spin-Hall edge states using topology optimization

Christiansen, R. E., Wang, F., Sigmund, O. & Stobbe, S., 2019, In : Nanophotonics. 8, 8, p. 1363-1369

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
113 Downloads (Pure)

Design of a Bi-stable Airfoil with Tailored Snap-through Response Using Topology Optimization

Bhattacharyya, A., Conlan-Smith, C. & James, K. A., 2019, In : CAD Computer Aided Design. 108, p. 42-55 14 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Design of Photonic Topological Insulators Using Density Based Topology Optimization

Christiansen, R. E., Wang, F., Sigmund, O. & Stobbe, S., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
116 Downloads (Pure)

Design of segmented off-diagonal thermoelectric generators using topology optimization

Lundgaard, C. & Sigmund, O., 2019, In : Applied Energy. 236, p. 950-960

Research output: Contribution to journalJournal articleResearchpeer-review

Design of segmented thermoelectric Peltier coolers by topology optimization

Lundgaard, C. & Sigmund, O., 2019, In : Applied Energy. 239, p. 1003-1013

Research output: Contribution to journalJournal articleResearchpeer-review

Determination of optimal residual stress profiles for improved rolling contact fatigue resistance

Mahdavi, H., Poulios, K. & Niordson, C. F., 2019, MATEC Web of Conferences . EDP Sciences, Vol. 300. 9 p. (MATEC Web of Conferences).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
14 Downloads (Pure)

Disbond Damage in Aircraft Sandwich Structures

Farshidi, A., 2019, Kgs. Lyngby: Technical University of Denmark. 146 p. (DCAMM Report; No. S253).

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
139 Downloads (Pure)

Dynamics of a Flexible Mobile Flywheel Energy Storage System – Theoretical Modeling and Analysis

Hansen, F. T., Dagnæs-Hansen, N. A. & Santos, I., 2019, Proceedings of 13th SIRM: The 13th International Conference on Dynamics of Rotating Machinery. Kgs. Lyngby: Technical University of Denmark, p. 418-428

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
25 Downloads (Pure)

Effect of damage-related microstructural parameters on plate tearing at steady state

Tekog̃lu, C. & Nielsen, K. L., 2019, In : European Journal of Mechanics, A/Solids. 77, 9 p., 103818.

Research output: Contribution to journalJournal articleResearchpeer-review

Effects of anisotropy and void shape on cavitation instabilities

Tvergaard, V. & Legarth, B. N., 2019, In : International Journal of Mechanical Sciences. 152, p. 81-87

Research output: Contribution to journalJournal articleResearchpeer-review

Efficient sound radiation using a bandgap structure

Jung, J., Jeong, C. H. & Jensen, J. S., 22 Jul 2019, In : Applied Physics Letters. 115, 4, 6 p., 041903.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
176 Downloads (Pure)

Experimental and Theoretical Study of an Actively Lubricated LEG Tilting Pad Bearing

Cerda Varela, A., Santos, I., Salazar, J. G. & Salazar, C. P., 2019, Proceedings of 13th SIRM: The 13th International Conference on Dynamics of Rotating Machinery. Kgs. Lyngby: Technical University of Denmark, p. 244-259

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
42 Downloads (Pure)

Experimental assessment of the robustness in fire of lightweight ship bulkheads

Hulin, T., Karatzas, V., Mindykowski, P., Jomaas, G., Berggreen, C., Lauridsen, D. & Dragsted, A., 2019, In : Marine Structures. 64, p. 161-173

Research output: Contribution to journalJournal articleResearchpeer-review

Experimental investigation of interfacial crack arrest in sandwich beams subjected to fatigue loading using a novel crack arresting device

Martakos, G., Andreasen, J. H., Berggreen, C. & Thomsen, O. T., 2019, In : Journal of Sandwich Structures and Materials. 2, 2, p. 401–421

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
153 Downloads (Pure)

Experimental testing of Timoshenko predictions of supercritical natural frequencies and mode shapes for free-free beams

Brøns, M. & Thomsen, J. J., 2019, In : Journal of Sound and Vibration. 459, 14 p., 114856.

Research output: Contribution to journalJournal articleResearchpeer-review

Finite element model coupled with lumped parameter elements

Nielsen, D. G., Jensen, J. S., Cutanda Henriquez, V. & Agerkvist, F. T., 2019, Proceedings of 14th International Conference on Theoretical and Computational Acoustics . 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
58 Downloads (Pure)

Fracture mechanics solutions for interfacial cracks between compressible thin layers and substrates

Massabò, R., Ustinov, K., Barbieri, L. & Berggreen, C., 2019, In : Journal of Coatings Technology and Research. 9, 3, 19 p., 152.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
156 Downloads (Pure)

Frequency detuning effects for a parametric amplifier

Neumeyer, S., Sorokin, V. S., van Gastel, M. H. M. & Thomsen, J. J., 2019, In : Journal of Sound and Vibration. 445, p. 77-87

Research output: Contribution to journalJournal articleResearchpeer-review

Grain-size affected mechanical response and deformation behavior in microscale reverse extrusion

Zhang, B., Dodaran, M., Ahmed, S., Shao, S., Meng, W. J., Juul, K. J. & Nielsen, K. L., 2019, In : Materialia. 6, 13 p., 100272.

Research output: Contribution to journalJournal articleResearchpeer-review

Grain size effect on deformation mechanisms in Mg-3Gd

Luo, X., Luo, J. Q., Feng, Z. Q., Hu, F. P., Yu, T., Berggreen, C., Wu, G. L., Hansen, N. & Huang, X., 2019, In : I O P Conference Series: Materials Science and Engineering. 580, 1, 6 p., 012040.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
24 Downloads (Pure)

Homogenization-based stiffness optimization and projection of 2D coated structures with orthotropic infill

Groen, J. P., Wu, J. & Sigmund, O., 2019, In : Computer Methods in Applied Mechanics and Engineering. 349, p. 722-742

Research output: Contribution to journalJournal articleResearchpeer-review

Increased Radiation Efficiency Using Band Gap Effect

Jung, J., Jeong, C-H. & Jensen, J. S., 2019, Proceedings of 23rd International Congress on Acoustics. Deutsche Gesellschaft für Akustik e.V., p. 4227-32 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
21 Downloads (Pure)

Interfacial crack arrest in sandwich beams subjected to fatigue loading using a novel crack arresting device – Numerical modelling

Martakos, G., Andreasen, J. H., Berggreen, C. & Thomsen, O. T., 2019, In : Journal of Sandwich Structures and Materials. 21, 2, p. 422-438

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
224 Downloads (Pure)

Magnetically suspended flywheel in gimbal mount - Test bench design and experimental validation

Dagnaes-Hansen, N. A. & Santos, I. F., 2019, In : Journal of Sound and Vibration. 448, p. 197-210

Research output: Contribution to journalJournal articleResearchpeer-review

Modelling of Compliant-type Gas Bearings: A Numerical Recipe

von Osmanski, S., Larsen, J. S. & Santos, I., 2019, Proceedings of 13th SIRM: The 13th International Conference on Dynamics of Rotating Machinery. Kgs. Lyngby: Technical University of Denmark, p. 14-27

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
40 Downloads (Pure)

Multi-Mode Piezoelectric Shunt Damping of Plate-Like Structures

Toftekær, J. F. & Høgsberg, J., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
3 Downloads (Pure)

Non-symmetric cyclic bending of helical wires in flexible pipes

Lukassen, T. V., Krenk, S., Glejbøl, K. & Berggreen, C., 2019, In : Applied Ocean Research. 92, 14 p., 101876.

Research output: Contribution to journalJournal articleResearchpeer-review