• Nils Koppels Alle, 404, 112

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

1975

On quadrature formulas for singular integral equations of the first and the second kind

Krenk, S., 1975, In : Quarterly of Applied Mathematics. 33, 3, p. 225-232

Research output: Contribution to journalJournal articleResearchpeer-review

1984

An investigation of flow characteristics at propeller open water tests and in behind conditions using thermoanemometric probe

Lazarov, B. S., Stephanov, S., Kussow, K. & Melikov, A. K., 1984, Proceedings of SMSSH'84, 13-th Scientific and Methodological Seminar on Ship Hydrodynamics. p. 124.1-124.9 (Computer Technique and Advanced Scientific Instrumentation in Ship Hydrodynamics, Vol. 4).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1996

Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio

Larsen, U. D., Sigmund, O. & Bouwstra, S., 1996, Proceedings of the Ninth Annual International Workshop on Micro Electro Mechanical Systems. IEEE, p. 365-371

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
1257 Downloads (Pure)
1997

Proceedings of MP2M Seminar

Bay, N. (ed.), Wanheim, T. (ed.), Hattel, J. H. (ed.), Tvergaard, V. (ed.), Danckert, J. (ed.), Jensen, D. J. (ed.) & Hansen, N. (ed.), 1997, IPT-DTU. 180 p.

Research output: Book/ReportBook

2001

3D analyses of ductile failure in metal reinforced by staggered fibres

Tvergaard, V., 2001, In : Modelling and Simulation in Materials Science and Engineering. 9, p. 143-155

Research output: Contribution to journalJournal articleResearchpeer-review

A 99 line topology optimization code written in matlab

Sigmund, O., 2001, In : Structural and Multidisciplinary Optimization. 21, 2, p. 120-127

Research output: Contribution to journalJournal articleResearchpeer-review

A calculation of sound propagation perpendicular to fixed fibres in glass wool

Tarnow, V., 2001, Proceedings of Euro-noise 2001. European Acoustics Association

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A contact model for the roller and sprocket engagement in roller-chain drives

Ambrósio, J. A. C., Pedersen, S. L. & Hansen, J. M., 2001, Proceedings of 2nd European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering. Institute of Computer Methods in Civil Engineering, Cracow University of Technology

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Analyses of size effects in the Charpy V-notch test

Benzerga, A. A., Batisse, R., Needleman, A. & Tvergaard, V., 2001, Proceedings of 10th International Conference on Fracture ICF-10. Elsevier

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Analysis of steady-state ductile crack growth along a laser weld

Niordson, C. F., 2001, In : International Journal of Fracture. 111, 1, p. 53-69

Research output: Contribution to journalJournal articleResearchpeer-review

A phenomenological plasticity model with non-normality effects representing observations in crystal plasticity

Kuroda, M. & Tvergaard, V., 2001, In : Journal of the Mechanics and Physics of Solids. 49, 6, p. 1239-1263

Research output: Contribution to journalJournal articleResearchpeer-review

A study of stresses in powder compacted components during and after ejection

Redanz, P., Feb 2001, In : International Journal of Solids and Structures. 38, 5, p. 759-775

Research output: Contribution to journalJournal articleResearchpeer-review

A web-based topology optimization program

Tcherniak, D. M. & Sigmund, O., 2001, In : Structural and Multidisciplinary Optimization. 22, 3, p. 179-187

Research output: Contribution to journalJournal articleResearchpeer-review

Chelomei`s pendulum explained

Thomsen, J. J. & Tcherniak, D. M., 2001, In : Royal Society of London. Proceedings. Mathematical, Physical and Engineering Sciences. 457, 2012, p. 1889-1913

Research output: Contribution to journalJournal articleResearchpeer-review

COMPACT ATHERMAL OPTICAL WAVEGUIDE USING THERMAL EXPANSION AMPLIFICATION

Sigmund, O., Beukema, M. A. & Pedersen, J. E., 2001, Patent No. WO2001035133, 17 May 2001

Research output: Patent

Crack growth predictions by cohesive zone model for ductile fracture

Tvergaard, V., 2001, In : Journal of the Mechanics and Physics of Solids. 49, 9, p. 2191-2207

Research output: Contribution to journalJournal articleResearchpeer-review

Damage evolution in metal matrix composites

Tvergaard, V., 2001, Proceedings of Eighth International Conference on Composites Engineering ICCE/8. International Community for Composites Engineering, University of New Orleans

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Design of multiphysics actuators using topology optimization - Part I: One-material structures

Sigmund, O., 2001, In : Computer Methods in Applied Mechanics and Engineering. 190, 49-50, p. 6577-6604

Research output: Contribution to journalJournal articleResearchpeer-review

Design of multiphysics actuators using topology optimization - Part II: Two-material structures

Sigmund, O., 2001, In : Computer Methods in Applied Mechanics and Engineering. 190, 49-50, p. 6605-6627

Research output: Contribution to journalJournal articleResearchpeer-review

Dynamic models for coupled blade-rotor vibrations

Saracho, C. M. & Santos, I., 2001, Proceedings of the IX International Conference on Dynamic Problems in Mechanics. The Brazilian Society of Mechanical Sciences

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Effect of residual stresses on buckling localization in a cylindrical panel

Tvergaard, V. & Needleman, A., 2001, In : AIAA Journal. Vol. 39, p. pp. 729-734

Research output: Contribution to journalJournal articleResearchpeer-review

Effect of T-stress and void nucleation on cohesive zone model predictions for ductile fracture

Tvergaard, V., 2001, Proceedings of 10th International Conference on Fracture ICF-10. Elsevier

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

Influence of orifice distribution on the thermal and static properties of hybridly lubricated bearings

Santos, I. & Nicoletti, R., 2001, In : International Journal of Solids and Structures. Vol. 38, No. 10-13, p. pp. 2069-2081

Research output: Contribution to journalJournal articleResearchpeer-review

Microstructural design of elastic band gap structures

Sigmund, O., 2001, Proceedings of the Fourth World Congress of Structural and Multidisciplinary Optimization. Liaoning Electronic Press

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Modified Gurson model

Tvergaard, V. & Needleman, A., 2001, Handbook of Materials Behavior Models. Academic Press, p. 430-435 1200 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Non-local plasticity effects on the tensile properties of a metal matrix composite

Niordson, C. F. & Tvergaard, V., 2001, In : European Journal of Mechanics A - Solids. 20, 4, p. 601-613

Research output: Contribution to journalJournal articleResearchpeer-review

On bone mechanics, modelling and optimisation

Pedersen, P., 2001, Proceedings of 15th AIMETA Congress. Aimeta

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

On crack tip stress releasing

Pedersen, P., 2001, Proceedings of the 14th Nordic Seminar on Computational Mechanics, NSCM - 14. Structural Mechanics LTH

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

On the influence of boundary conditions, Poisson`s ratio and material non-linearity on the optimal shape

Pedersen, P., 2001, In : International Journal of Solids and Structures. 38, 3, p. 465-477

Research output: Contribution to journalJournal articleResearchpeer-review

Optimal shape design of a hole in front of a crack

Pedersen, P., 2001, Proceedings of the Fourth World Congress of Structural and Multidisciplinary Optimization. Liaoning Electronic Press

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Optimal shape design of stress releasing holes

Pedersen, P., 2001, Proceedings of 10th International Conference on Fracture ICF-10. Elsevier

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Optimization of integrated magnetic field sensors

Lieneman, J., Greiner, A., Korvink, J. G. & Sigmund, O., 2001, Proceedings of MSM2001. Cambridge, MA, USA: ACRS Publishing

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Optimum design of MicroElectroMechanical systems

Sigmund, O., 2001, Proceedings of the 20th International Congress of Theortical and Applied Mechanics. Mechanics for a New Millennium: Kluwer Academic Publishers

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Plastic spin associated with non-normality theory of plasticity

Kuroda, M. & Tvergaard, V., 2001, In : European Journal of Mechanics A - Solids. Vol. 20, p. pp. 893-905

Research output: Contribution to journalJournal articleResearchpeer-review

Predicting vibration-induced displacement for a resonant friction slider

Fidlin, A. & Thomsen, J. J., 2001, In : European Journal of Mechanics A - Solids. Vol. 20, 1, p. pp. 155-166

Research output: Contribution to journalJournal articleResearchpeer-review

Recent developments in extremal material design

Sigmund, O., 2001, Proceedings of Trends in Computational Mechanics. CIMNE

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Recent experience in cavitation performance and structural response for fast ferries

Jensen, J. S., Sørensen, A. R. & Rasmussen, U. M., 2001, Proceedings of the 2nd International EuroConference on High-Performance Marine Vehicles HIPER´01. TUHH Technologie GmbH

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Resistance curves for mixed mode interface crack growth between dissimilar elastic-plastic solids

Tvergaard, V., 2001, In : Journal of the Mechanics and Physics of Solids. 49, 11, p. 2689-2703

Research output: Contribution to journalJournal articleResearchpeer-review

Shape design and analysis using simple hole modelling

Pedersen, P., 2001, Proceedings of 2nd Max Planck Workshop on Engineering Design Optimization. Department of Mathematics, Technical University of Denmark

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Shear band development predicted by a non-normality theory of plasticity and comparison to crystal plasticity predictions

Kuroda, M. & Tvergaard, V., 2001, In : International Journal of Solids and Structures. Vol. 38, p. pp. 8945-8960

Research output: Contribution to journalJournal articleResearchpeer-review

Shear band instability in compacted metal powder with or without inter-particle cohesion

Tvergaard, V. & Redanz, P., 2001, In : Journal de Physique. Vol. 11, p. pp. 339-347

Research output: Contribution to journalJournal articleResearchpeer-review

Sintering and coarsening of spherical particles - a micromechanical approach

Redanz, P. & McMeeking, R. M., 2001, Proceedings of the 4th International ESAFORM Conference on Material Forming. Belgium: Departement MSM Université de Liège

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Solving frictional contact problems using an optimization algorithm

Dornonville de la Cour, D. & Pedersen, P., 2001, Proceedings of the Fourth World Congress of Structural and Multidisciplinary Optimization. Liaoning Electronic Press

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

The compaction of a random distribution of metal cylinders by the discrete element method

Redanz, P. & Fleck, N. A., 2001, In : Acta Materialia. 49, 20, p. 4325-4335

Research output: Contribution to journalJournal articleResearchpeer-review

Theoretical and experimental determination of the equivalent stiffness and damping deriving from the fluid flow passing through flexible plates

Padovese, G. C. & Santos, I., 2001, Proceedings of the IX International Conference on Dynamic Problems in Mechanics. Brazilian Society of Mechanical Sciences

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Topology design of bistable mechanisms

Bruns, T. E. & Sigmund, O., 2001, Proceedings of the Fourth World Congress of Structural and Multidisciplinary Optimization. Liaoning Electronic Press

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Topology synthesis of large-displacement compliant mechanisms

Pedersen, C. B. W., Buhl, T. & Sigmund, O., 2001, In : International Journal for Numerical Methods in Engineering. 50, 12, p. 2683-2706

Research output: Contribution to journalJournal articleResearchpeer-review

Vibration control of rotating machinery using active tilting-pad bearings

Nicoletti, R. & Santos, I., 2001, Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics. IEEE

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Vibration reduction of rotating systems using active tilting-pad bearings and PD controllers

Nicoletti, R. & Santos, I., 2001, Proceedings of the IX International Conference on Dynamic Problems in Mechanics. ABCM - Brazilian Society of Mechanical Sciences

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review