• Nils Koppels Alle, 404, 112

    DK-2800 Kgs. Lyngby

    Denmark

Research Output 1975 2020

2020

3D study of plastic flow localization at a void-sheet

Tvergaard, V. & Legarth, B. N., 2020, In : International Journal of Mechanical Sciences. 173, 9 p., 105426.

Research output: Contribution to journalJournal articleResearchpeer-review

Analysis of Transient Vibrations for Estimating Bolted Joint Tightness

Brøns, M., Thomsen, J. J., Sah, S. M., Tcherniak, D. & Fidlin, A., 2020, Nonlinear Structures and Systems: Conference Proceedings of the Society for Experimental Mechanics Series. Brake, M. R. W. & Renson, L. (eds.). Springer, p. 21-24 (Conference Proceedings of the Society for Experimental Mechanics Series, Vol. 1).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

An experimental and theoretical approach of a pinned and a conventional ball bearing for active magnetic bearings

Fonseca, C. A., Santos, I. & Weber, H. I., 2020, In : Mechanical Systems and Signal Processing. 138, 106541.

Research output: Contribution to journalJournal articleResearchpeer-review

A simple characterization of H-convergence for a class of nonlocal problems

Bellido, J. C. & Evgrafov, A., 2020, (Accepted/In press) In : Revista Matemática Complutense.

Research output: Contribution to journalJournal articleResearchpeer-review

14 Downloads (Pure)

Full three dimensional cavitation instabilities using a non-quadratic anisotropic yield function

Legarth, B. N. & Tvergaard, V., 2020, In : Journal of Applied Mechanics. 87, 3, 10 p., 031009.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Improving the efficiency of upconversion by light concentration using nanoparticle design: Topical Review

Madsen, S. P., Christiansen, J., Christiansen, R. E., Vester-Petersen, J., Møller, S. H., Lakhotiya, H., Nazir, A., Eriksen, E., Roesgaard, S., Sigmund, O., Lissau, J. S., Destouesse, E., Madsen, M., Julsgaard, B. & Balling, P., 2020, In : Journal of Physics D: Applied Physics. 53, 7, 39 p., 073001.

Research output: Contribution to journalJournal articleResearchpeer-review

Isotropic “Quasi‐Fluid” Metamaterials Designed by Topology Optimization

Zhang, H., Kang, Z., Wang, Y. & Wu, W., 2020, In : Advanced Theory and Simulations. 3, 1, 7 p., 1900182.

Research output: Contribution to journalJournal articleResearchpeer-review

Multi-domain stability and modal analysis applied to Gas Foil Bearings: Three approaches

Osmanski, S. V., Larsen, J. S. & Santos, I. F., 2020, In : Journal of Sound and Vibration. 472, 24 p., 115174.

Research output: Contribution to journalJournal articleResearchpeer-review

Nonlinear compressive stability of hyperelastic 2D lattices at finite volume fractions

Bluhm, G. L., Sigmund, O., Wang, F. & Poulios, K., 2020, In : Journal of the Mechanics and Physics of Solids. 137, 19 p., 103851.

Research output: Contribution to journalJournal articleResearchpeer-review

Spectrally smooth and spatially uniform sound radiation from a thin plate structure using band gaps

Jung, J., Jeong, C-H. & Jensen, J. S., 2020, In : Journal of Sound and Vibration. 471, 17 p., 115187.

Research output: Contribution to journalJournal articleResearchpeer-review

Strongly enhanced upconversion in trivalent erbium ions by tailored gold nanostructures: Toward high-efficient silicon-based photovoltaics

Christiansen, J., Vester-Petersen, J., Roesgaard, S., Møller, S. H., Christiansen, R. E., Sigmund, O., Madsen, S. P., Balling, P. & Julsgaard, B., 2020, In : Solar Energy Materials and Solar Cells. 208, 7 p., 110406.

Research output: Contribution to journalJournal articleResearchpeer-review

Topology optimization of fluidic pressure-loaded structures and compliant mechanisms using the Darcy method

Kumar, P., Frouws, J. S. & Langelaar, M., 2020, (Accepted/In press) In : Structural and Multidisciplinary Optimization. 19 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Towards solving large-scale topology optimization problems with buckling constraints at the cost of linear analyses

Ferrari, F. & Sigmund, O., 2020, (Accepted/In press) In : Computer Methods in Applied Mechanics and Engineering.

Research output: Contribution to journalJournal articleResearchpeer-review

Transverse vibrations of tightened bolts: Simplified modeling of tension-dependent boundary stiffness and damping

Sah, S. M., Thomsen, J. J. & Fidlin, A., 2020, In : Engineering Structures. 205, 110049.

Research output: Contribution to journalJournal articleResearchpeer-review

2019

A 3D Approach for THD Lubrication in Tilting Pad Journal Bearing—Theory and Experiment

Bizarre, L., Andersen, T. B., Daniel, G. B., Santos, I. F. & Cavalca, K. L., 2019, (Accepted/In press) In : Tribology Transactions.

Research output: Contribution to journalJournal articleResearchpeer-review

174 Downloads (Pure)

Acoustic and photonic topological insulators by topology optimization

Christiansen, R. E., Wang, F., Stobbe, S. & Sigmund, O., 2019, Proceedings of SPIE - Metamaterials, Metadevices, and Metasystems 2019. Engheta, N., Noginov, M. A. & Zheludev, N. I. (eds.). SPIE - International Society for Optical Engineering, Vol. 11080. 7 p. 1108003. (Proceedings of SPIE, the International Society for Optical Engineering, Vol. 11080).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Active Warping Control For Damping Of Torsional Beam Vibrations

Hoffmeyer, D. & Høgsberg, J., 2019, (Accepted/In press) Proceedings of the 9th Conference on Smart Structures and Materials SMART 2019. Benjeddou, A., Mechbal, N. & Deü, J. F. (eds.). International Center for Numerical Methods in Engineering, 11 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A density-based topology optimization methodology for thermal energy storage systems

Lundgaard, C., Engelbrecht, K. & Sigmund, O., 2019, In : Structural and Multidisciplinary Optimization. 60, 6, p. 2189-2204 16 p.

Research output: Contribution to journalJournal articleResearchpeer-review

A homogenized model for size-effects in porous metals

Niordson, C. F. & Tvergaard, V., 2019, In : Journal of the Mechanics and Physics of Solids. 123, p. 222-233

Research output: Contribution to journalJournal articleResearchpeer-review

48 Downloads (Pure)

An experimental investigation of the flexural strength of soda–lime–silica glass at high loading rates

Meyland, M. J., Bønding, C. K. T., Eriksen, R. N. W. & Nielsen, J. H., 2019, In : Glass Structures & Engineering. 4, 2, p. 175-183

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

An investigation of back stress formulations under cyclic loading

El-Naaman, S. A., Nielsen, K. L. & Niordson, C. F., 2019, In : Mechanics of Materials. 130, p. 76-87

Research output: Contribution to journalJournal articleResearchpeer-review

A non-linear material interpolation for design of metallic nano-particles using topology optimization

Christiansen, R. E., Vester-Petersen, J., Madsen, S. P. & Sigmund, O., 2019, In : Computer Methods in Applied Mechanics and Engineering. 343, p. 23-39

Research output: Contribution to journalJournal articleResearchpeer-review

A non-local SIMP model and sensitivity filtering

Evgrafov, A. & C. Bellido, J., 2019, Advances in Structural and Multidisciplinary Optimization: Proceedings of the 13th World Congress of Structural and Multidisciplinary Optimization. Guo, X. & Huang, H. (eds.). Dalian University of Technology Electronic & Audio-visual Press, p. 221-225

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A periodic linear–quadratic controller for suppressing rotor-blade vibration

Camino, J. F. & Santos, I. F., 2019, In : Journal of Vibration and Control. 25, 17, p. 2351–2364

Research output: Contribution to journalJournal articleResearchpeer-review

A potential for higher-order phenomenological strain gradient plasticity to predict reliable response under non-proportional loading

Panteghini, A., Bardella, L. & Niordson, C. F., 2019, In : Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 475, 2229, 21 p., 20190258.

Research output: Contribution to journalJournal articleResearchpeer-review

Application of OMA techniques to LTP systems

Deon, M., Santos, I. F. & Coppotelli, G., 2019, Proceedings of the 8th Iomac - International Operational Modal Analysis Conference. p. 577-589

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

40 Downloads (Pure)

A simple method for coupled acoustic-mechanical analysis with application to gradient-based topology optimization

Jensen, J. S., 2019, In : Structural and Multidisciplinary Optimization. 59, 5, p. 1567–1580

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
15 Downloads (Pure)

Aspects of Multi-pass GTAW of Low Alloyed Steels

Somlo, K. & Sziebig, G., 2019, In : IFAC-PapersOnLine. 52, 22, p. 101-107 7 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

A steady-state modeling framework incorporating the Kuroda–Tvergaard model: demonstrated on single crystal crack growth

Juul, K. J., El-Naaman, S. A., Nielsen, K. L. & Niordson, C. F., 2019, In : Archive of Applied Mechanics. 89, 10, p. 2133–2145

Research output: Contribution to journalJournal articleResearchpeer-review

A stress-based topology optimization method for heterogeneous structures

Conlan-Smith, C. & James, K. A., 2019, In : Structural and Multidisciplinary Optimization. 60, 1, p. 167-183

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
52 Downloads (Pure)

Automated wind turbine gearbox bearing diagnosis algorithm based on vibration data analysis and signal pre-whitening

Schlechtingen, M. & Santos, I., 2019, Proceedings of 13th SIRM: The 13th International Conference on Dynamics of Rotating Machinery. Kgs. Lyngby: Technical University of Denmark, p. 88-114

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
16 Downloads (Pure)

Automatic Design of Soft Dielectric Elastomer Actuators With Optimal Spatial Electric Fields

Chen, F., Liu, K., Wang, Y., Zou, J., Gu, G. & Zhu, X., 2019, In : IEEE Transactions on Robotics. 35, 5, p. 1150-1165

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Axially variable-length solid element of absolute nodal coordinate formulation

Sun, J., Tian, Q., Hu, H. & Pedersen, N. L., 2019, In : Acta Mechanica Sinica. 35, p. 653–663

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

A “poor man’s” approach for high-resolution three-dimensional topology design for natural convection problems

Pollini, N., Sigmund, O., Andreasen, C. S. & Alexandersen, J., 2019, In : Advances in Engineering Software. 140, 18 p., 102736.

Research output: Contribution to journalJournal articleResearchpeer-review

A “poor man’s” approach to topology optimization of natural convection problems

Asmussen, J., Alexandersen, J., Sigmund, O. & Andreasen, C. S., 2019, In : Structural and Multidisciplinary Optimization. 59, 4, p. 1105-1124

Research output: Contribution to journalJournal articleResearchpeer-review

Backcalculation of Raptor (RWD) Measurements and Forward Prediction of FWD Deflections Compared with FWD Measurements

Madsen, S. S. & Pedersen, N. L., 2019, Proceedings of the International and Highway Pavements Conference. American Society of Civil Engineers, p. 382-391

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Coexistence of infinitely many large, stable, rapidly oscillating periodic solutions in time-delayed Duffing oscillators

Fiedler, B., Nieto, A. L., Rand, R. H., Sah, S. M., Schneider, I. & de Wolff, B., 2019, (Accepted/In press) In : Journal of Differential Equations. 27 p.

Research output: Contribution to journalJournal articleResearchpeer-review

40 Downloads (Pure)

Composite Materials for Electrical Transmission Mast Structures

Manouchehr, M., 2019, Kgs. Lyngby: Technical University of Denmark. 87 p. (DCAMM Special Report; No. S260).

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
40 Downloads (Pure)

Cruciform Specimen Designs for Planar Biaxial Fatigue Testing in Composites

Moncy, A., Castro, O. & Berggreen, C., 2019, Proceedings of 22nd International Conference on Composite Materials. 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
136 Downloads (Pure)

Damping analysis of cylindrical composite structures with enhanced viscoelastic properties

Kliem, M., Høgsberg, J. B., Vanwalleghem, J., Filippatos, A., Hoschützky, S., Fotsing, E-R. & Berggreen, C., 2019, In : Applied Composite Materials. 26, 1, p. 85-113 29 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
20 Downloads (Pure)

Damping of Torsional Beam Vibrations

Hoffmeyer, D., 2019, Kgs. Lyngby: Technical University of Denmark. 172 p. (DCAMM Special Report; No. S263).

Research output: Book/ReportPh.D. thesisResearch

Open Access
File

Damping of torsional vibrations in thin-walled beams by viscous bimoments

Hoffmeyer, D. & Høgsberg, J., 2019, (Accepted/In press) In : Mechanics of Advanced Materials and Structures.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
65 Downloads (Pure)

Damping system for long‐span suspension bridges

Nøhr Møller, R., Krenk, S. & Svendsen, M. N., 2019, In : Structural Control and Health Monitoring. 26, 12, 23 p., e2448.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
106 Downloads (Pure)

Designing Manufacturable Photonic and Plasmonic Structures using Topology Optimization

Christiansen, R. E. & Sigmund, O., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
113 Downloads (Pure)

Designing photonic topological insulators with quantum-spin-Hall edge states using topology optimization

Christiansen, R. E., Wang, F., Sigmund, O. & Stobbe, S., 2019, In : Nanophotonics. 8, 8, p. 1363-1369

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Design of a Bi-stable Airfoil with Tailored Snap-through Response Using Topology Optimization

Bhattacharyya, A., Conlan-Smith, C. & James, K. A., 2019, In : CAD Computer Aided Design. 108, p. 42-55 14 p.

Research output: Contribution to journalJournal articleResearchpeer-review

116 Downloads (Pure)

Design of Photonic Topological Insulators Using Density Based Topology Optimization

Christiansen, R. E., Wang, F., Sigmund, O. & Stobbe, S., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File

Design of segmented off-diagonal thermoelectric generators using topology optimization

Lundgaard, C. & Sigmund, O., 2019, In : Applied Energy. 236, p. 950-960

Research output: Contribution to journalJournal articleResearchpeer-review