• Phone+45 45 25 28 00, +45 45 88 22 58
  • Søltofts Plads, 229

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Report
2017

Implementation of advanced process control on the four tank pilot plant

Schroll-Fleischer, E., Huusom, J. K. & Jørgensen, J. B., 2017, Technical University of Denmark. 114 p. (DTU Compute-Technical Report-2017, Vol. 02).

Research output: Book/ReportReport

Open Access
File
1271 Downloads (Pure)
2016

Project report: Experimental planning and verification of working fluids (WP 5)

Babi, D. K., 2016, Kgs. Lyngby: Technical University of Denmark. 25 p.

Research output: Book/ReportReportCommissioned

Open Access
File
93 Downloads (Pure)
2015

Design of a process template for amine synthesis

Singh, R., Godfrey, A., Gregertsen, B., Muller, F., Vankayala, B., Haas-Santo, K., Gernaey, K., Gani, R. & Woodley, J., 2015, Technical University of Denmark, Department of Chemical and Biochemical Engineering. 26 p. (CAPEC-PROCESS Report).

Research output: Book/ReportReport

Use of operating windows for assessment of continuous plug flow slurry reactor

Singh, R., Gregertsen, B., Muller, F., Gernaey, K., Gani, R. & Woodley, J., 2015, DTU Chemical Engineering. 31 p. (CAPEC-PROCESS Report).

Research output: Book/ReportReport

2014
535 Downloads (Pure)
2013
558 Downloads (Pure)
Open Access
File
314 Downloads (Pure)
2012

CAPEC-PROCESS Research Report 2012

Gani, R. & Woodley, J., 2012, DTU Chemical Engineering. 97 p. (PEC12-25).

Research output: Book/ReportReport

Open Access
File
1633 Downloads (Pure)
2011

CAPEC-PROCESS Research Report 2011

Gani, R. & Woodley, J., 2011, Kgs.Lyngby: DTU Chemical Engineering. 103 p.

Research output: Book/ReportReport

Open Access
File
296 Downloads (Pure)

Sustainable design for an olefin process: Internal report

Iyara, N., Siemanond, K. & Gani, R., 2011, DTU Chemical Engineering.

Research output: Book/ReportReport

Sustainable process design for lignocellulosic-based bioethanol using life cycle assessment technique: Internal report

Tansutapanich, P., Malakul, P. & Gani, R., 2011, DTU Chemical Engineering.

Research output: Book/ReportReportResearch

2010

CAPEC Research Report 2010

Gani, R., 2010

Research output: Book/ReportReportResearchpeer-review

Open Access
File
150 Downloads (Pure)

CAPEC Research Report 2009

Gani, R., 2009, Kgs. Lyngby: Technical University of Denmark. 60 p. (CAPEC Research Report; No. PEC09-25).

Research output: Book/ReportReportResearchpeer-review

Open Access
File
77 Downloads (Pure)

Optimization of long-term planning, supply chain and processing routes for tailor-made bio-chemicals

Swangkotchakorn, C., Hansen, K. R. N., Grunwaldt, J-D., Woodley, J. & Gani, R., 2009

Research output: Book/ReportReport

2008
Open Access
File
151 Downloads (Pure)

CAPEC Research Report 2008

Gani, R. & Abildskov, J., 2008, CAPEC-DTU.

Research output: Book/ReportReport

CAPEC Research Report 2007

Gani, R. & Abildskov, J., 2007, CAPEC-DTU.

Research output: Book/ReportReport

Industriel Molekylsimulering

Christensen, S., Peters, G. H., Hansen, F. Y. & Abildskov, J., 2007, Dansk Kemi, 88(2): 18.

Research output: Book/ReportReport

Integrating multilevel modeling aspects to predict gas permeability in polymers for design of membranes

Soni, V., Abildskov, J., Jonsson, G. E., Gani, R., Karayiannis, N. & Mavrantzas, V., 2007, Fluid Phase Equilibria. (Special Issue: PPEPPD 2007, Submitted (also PPEPPD Proceedings in CD)).

Research output: Book/ReportReport

Matlab Toolbox Manual

Barrero Mendoza, O. & Jørgensen, S. B., 2007, CAPEC-DTU.

Research output: Book/ReportReport

The Age of Computer Aided Modelling and Simulation for Chemical Products and Their Processes

Gani, R., 2007, Proceedings of ICAPP 2007.

Research output: Book/ReportReportResearchpeer-review

2006

CAPEC Research Report 2006

Gani, R. & Abildskov, J., 2006

Research output: Book/ReportReport

2005

EFCE Bologna Recommendations

Abildskov, J., 2005, 83(A11) ed. Chemical Engineering Research & Design (Trans IChemE, Part A)).

Research output: Book/ReportReport

Knowledge-Driven Batch Production – BatchPro

Jørgensen, S. B., 2005

Research output: Book/ReportReport

U-Loop Reactor Modelling for Optimization – Part I: Estimation of Heat Loss

Andersen, B. R., Andersen, J. B. & Jørgensen, S. B., 2005

Research output: Book/ReportReport

U-Loop Reactor Modelling for Optimization – Part II: Mass Transfer

Andersen, B. R., Jørgensen, J. B. & Jørgensen, S. B., 2005

Research output: Book/ReportReport

CAPEC Research Report 2004

Gani, R. & Jørgensen, S. B., 2004

Research output: Book/ReportReport

2002

Nanotechnology at KT

Glarborg, P., Hassager, O., Jonsson, G. E., Stenby, E. H. & Gani, R., 2002

Research output: Book/ReportReport

Research at KT 2002

Glarborg, P., Hassager, O., Jonsson, G. E., Stenby, E. H. & Gani, R., 2002

Research output: Book/ReportReport

2000

CAPEC Research Report 2000

Jørgensen, S. B. & Gani, R., 2000

Research output: Book/ReportReport