• Produktionstorvet, 425, 120

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

2020

Analysis of lubricant performance in punching and blanking

Moghadam, M., Villa, M., Moreau, P., Dubois, A., Dubar, L., Nielsen, C. V. & Bay, N., 2020, In : Tribology International. 141, 8 p., 105949.

Research output: Contribution to journalJournal articleResearchpeer-review

2 Downloads (Pure)

An electrochemical and X-ray computed tomography investigation of the effect of temperature on CO2 corrosion of 1Cr carbon steel

Rizzo, R., Baier, S., Rogowska, M. & Ambat, R., 2020, In : Corrosion science. 166, 11 p., 108471.

Research output: Contribution to journalJournal articleResearchpeer-review

Anisotropy effects on gaseous nitriding of austenitic stainless steel single crystals

Kücükyildiz, Ö. C., Grumsen, F. B., Christiansen, T. L., Winther, G. & Somers, M. A. J., 2020, In : Acta Materialia. 194, p. 168-177

Research output: Contribution to journalJournal articleResearchpeer-review

A simple model for nitrogen-induced lattice expansion of γ'N and γ N phases in Fe–Cr–Ni alloys with different chromium contents

Che, H. L., Lei, M. K. & Somers, M. A. J., 2020, (Accepted/In press) In : Philosophical Magazine Letters.

Research output: Contribution to journalJournal articleResearchpeer-review

A single parameter approach to enhance the microstructural and mechanical properties of beta Ti-Nb alloy via open-air fiber laser nitriding

Chan, C. W., Chang, X., Bozorgzadeh, M. A., Smith, G. C. & Lee, S., 2020, In : Surface and Coatings Technology. 383, 11 p., 125269.

Research output: Contribution to journalJournal articleResearchpeer-review

A System Engineering Approach Using FMEA and Bayesian Network for Risk Analysis—A Case Study

Rastayesh, S., Bahrebar, S., Blaabjerg, F., Zhou, D., Wang, H. & Sørensen, J. D., 2020, In : Sustainability. 12, 1, 18 p., 77.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
89 Downloads (Pure)

Breakdown mechanism of γ-Al2O3 on Ni2Al3 coatings exposed in a biomass fired power plant

Wu, D. L., Dahl, K. V., Grumsen, F. B., Christiansen, T. L., Montgomery, M. & Hald, J., 2020, In : Corrosion science. 170, 14 p., 108583.

Research output: Contribution to journalJournal articleResearchpeer-review

Characterization, formation and development of scales on L80 steel tube resulting from seawater injection treatment

Yang, Y., Luo, X., Hong, C., Yadav, A., Rogowska, M. & Ambat, R., 2020, (Accepted/In press) In : Journal of Petroleum Science and Engineering. 193, 107433.

Research output: Contribution to journalJournal articleResearchpeer-review

Corrosion of carbon steel under CO2 conditions: Effect of CaCO3 precipitation on the stability of the FeCO3 protective layer

Rizzo, R., Gupta, S., Rogowska, M. & Ambat, R., 2020, In : Corrosion science. 162, 12 p., 108214.

Research output: Contribution to journalJournal articleResearchpeer-review

Deformation mechanisms in meta-stable and nitrogen-stabilized austenitic stainless steel during severe surface deformation

Wang, B., Hong, C., Winther, G., Christiansen, T. L. & Somers, M. A. J., 2020, In : Materialia. 12, 12 p., 100751.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
38 Downloads (Pure)

Development of Stochastic Fatigue Model of Reinforcement for Reliability of Concrete Structures

Rastayesh, S., Mankar, A., Dalsgaard Sørensen, J. & Bahrebar, S., 2020, In : Applied Sciences. 10, 2, 13 p., 604.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
64 Downloads (Pure)

Effect of low-temperature surface hardening by carburization on the fatigue behavior of AISI 316L austenitic stainless steel

Peng, Y., Liu, Z., Chen, C., Gong, J. & Somers, M. A. J., 2020, In : Materials Science and Engineering A. 769, 9 p., 138524.

Research output: Contribution to journalJournal articleResearchpeer-review

Evolution of hard Fe–C electrodeposits with temperature

Nielsen, J. O. & Pantleon, K., 2020, (Accepted/In press) In : Surface Engineering.

Research output: Contribution to journalJournal articleResearchpeer-review

Gaseous surface hardening of Ti-6Al-4V fabricated by selective laser melting

Valente, E. H., Jellesen, M. S., Somers, M. A. J. & Christiansen, T. L., 2020, In : Surface and Coatings Technology. 383, 13 p., 125278.

Research output: Contribution to journalJournal articleResearchpeer-review

Humidity Robustness of Plasma-Coated PCBs

Khangholi, A., Li, F., Piotrowska, K., Loulidi, S., Ambat, R., Van Assche, G., Hubin, A. & De Graeve, I., 2020, In : Journal of Electronic Materials. 49, 1, p. 848-860

Research output: Contribution to journalJournal articleResearchpeer-review

Interactions of salivary mucins and saliva with food proteins: a review

Çelebioğlu, H. Y., Lee, S. & Chronakis, I. S., 2020, In : Critical Reviews in Food Science and Nutrition. 60, 1, p. 64-83 20 p.

Research output: Contribution to journalReviewResearchpeer-review

Open Access
File
158 Downloads (Pure)

Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys

Lozinko, A., Zhang, Y., Mishin, O. V., Klement, U. & Guo, S., 2020, In : Journal of Alloys and Compounds. 822, 7 p., 153558.

Research output: Contribution to journalJournal articleResearchpeer-review

Microstructural evolution in Mg-3Gd during accumulative roll-bonding

Luo, X., Feng, Z., Yu, T., Huang, T., Li, R., Wu, G., Hansen, N. & Huang, X., 2020, In : Materials Science and Engineering A. 772, 8 p., 138763.

Research output: Contribution to journalJournal articleResearchpeer-review

Non-equilibrium condensation of water vapour in supersonic flows with shock waves

Wen, C., Karvounis, N., Walther, J. H., Ding, H. & Yang, Y., 2020, In : International Journal of Heat and Mass Transfer. 149, 16 p., 119109.

Research output: Contribution to journalJournal articleResearchpeer-review

On the microstructural and electrochemical nature of hydrothermally treated Al-Zr and Al-Ti surfaces

Tan, J., Crosio, M., Vinkel, N. M., Jensen, P., Abrahami, S. T., Gudla, V. C. & Ambat, R., 2020, In : Corrosion science. 163, 13 p., 108244.

Research output: Contribution to journalJournal articleResearchpeer-review

Optimization of anti-wear and anti-bacterial properties of beta TiNb alloy via controlling duty cycle in open-air laser nitriding

Chang, X., Smith, G. C., Quinn, J., Carson, L., Chan, C-W. & Lee, S., 2020, In : Journal of the Mechanical Behavior of Biomedical Materials. 110, 13 p., 103913.

Research output: Contribution to journalJournal articleResearchpeer-review

Theoretical development of continuum dislocation dynamics for finite-deformation crystal plasticity at the mesoscale

Starkey, K., Winther, G. & El-Azab, A., 2020, In : Journal of the Mechanics and Physics of Solids. 139, 27 p., 103926.

Research output: Contribution to journalJournal articleResearchpeer-review

Thermal decomposition of binary mixtures of organic activators used in no-clean fluxes and impact on PCBA corrosion reliability

Piotrowska, K., Li, F. & Ambat, R., 2020, In : Soldering & Surface Mount Technology. 32, 2, p. 93-103

Research output: Contribution to journalJournal articleResearchpeer-review

The synergy of boundary engineering and segregation strategy towards high strength and ductility Mg-3Gd alloy

Luo, X., Feng, Z., Fu, R., Huang, T., Wu, G. & Huang, X., 2020, In : Journal of Alloys and Compounds. 819, 8 p., 153051.

Research output: Contribution to journalJournal articleResearchpeer-review

Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd

Luo, X., Feng, Z., Yu, T., Luo, J., Huang, T., Wu, G., Hansen, N. & Huang, X., 2020, In : Acta Materialia. 183, p. 398-407

Research output: Contribution to journalJournal articleResearchpeer-review

Unusual through-thickness variations of microstructure and texture in heavily rolled and annealed Al–0.3%Cu

Shuai, L. F., Huang, T. L., Wu, G. L., Winther, G., Huang, X. & Mishin, O. V., 2020, In : Materials Characterization. 162, 8 p., 110173.

Research output: Contribution to journalJournal articleResearchpeer-review

2019

3D X-ray computerized tomography of White Etching Cracks (WEC)

Danielsen, H. K., Carrasco, A. J., Fæster, S., Dahl, K. V., Guzmán, F. G., Sauvage, P. & Jacobs, G., 2019, In : Materials Characterization. 150, p. 78-87

Research output: Contribution to journalJournal articleResearchpeer-review

A method for identification and quantification of thermal lensing in powder bed fusion

Andersen, S. A., Valente, E. H., Nadimpalli, V. K., Hansen, H. N. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 230-233

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
55 Downloads (Pure)

Analysis of Grain-Resolved Data from Three-Dimensional X-Ray Diffraction Microscopy in the Elastic and Plastic Regimes

Juul, N. Y., Oddershede, J. & Winther, G., 2019, In : J O M. 72, p. 83–90

Research output: Contribution to journalJournal articleResearchpeer-review

Analyzing Boron in 9–12% Chromium Steels Using Atom Probe Tomography

Fedorova, I., Grumsen, F. B., Hald, J., Andrén, H-O. & Liu, F., 2019, In : Microscopy and Microanalysis. 25, Special Issue 2, p. 462-469

Research output: Contribution to journalJournal articleResearchpeer-review

An efficient approach to separate CO2 using supersonic flows for carbon capture and storage

Wen, C., Karvounis, N., Walther, J. H., Yan, Y., Feng, Y. & Yang, Y., 2019, In : Applied Energy. 238, p. 311-319

Research output: Contribution to journalJournal articleResearchpeer-review

A Novel Electroscrubbing Process for Gas Cleaning

Villadsen, S. N. B., 2019, Kgs. Lyngby, Denmark: Technical University of Denmark. 219 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
82 Downloads (Pure)

A sheet metal necking formability diagram for nonlinear strain paths

Christiansen, P., Jensen, M. R. B. & Winther, G., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 233, 7, p. 1287-1294 8 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
191 Downloads (Pure)

Breaking the Limit of Micro-Ductility in Oxide Glasses

Januchta, K., Stepniewska, M., Jensen, L. R., Zhang, Y., Somers, M. A. J., Bauchy, M., Yue, Y. & Smedskjær, M. M., 2019, In : Advanced Science. 6, 18, 9 p., 1901281.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
94 Downloads (Pure)

Change of the Decorative Properties of Zinc-Plated Zinc Die Castings over Time

Reveko, V., Lampert, F., Winther, G. & Møller, P., 2019, In : International Journal of Metalcasting. 13, 1, p. 130-136

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
15 Downloads (Pure)

Characterization of blisters on powder coated aluminium AA5006 architectural profiles

Zaffaroni, G. G. B., Gudla, V. C., Ud Din, R. & Ambat, R., 2019, In : Engineering Failure Analysis. 103, p. 347-360

Research output: Contribution to journalJournal articleResearchpeer-review

Circuit analysis to predict humidity related failures in electronics - Methodology and recommendations

Joshy, S., Verdingovas, V., Jellesen, M. S. & Ambat, R., 2019, In : Microelectronics Reliability. 93, p. 81-88

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Co-existence of γ'N phase and γN phase on nitrided austenitic Fe–Cr–Ni alloys- I. experiment

Che, H. L., Tong, S., Wang, K. S., Lei, M. K. & Somers, M. A. J., 2019, In : Acta Materialia. 177, p. 35-45

Research output: Contribution to journalJournal articleResearchpeer-review

Combined effects of source hardening and activation of new slip systems on simultaneous enhancement of strength and ductility in fine-grained Mg-3Gd alloy

Luo, X., Wu, G., Feng, Z., Luo, J., Yu, T., Huang, T., Hansen, N. & Huang, X., 2019, Proceedings of the 40th Risø International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D. DTU Mechanical Engineering, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
25 Downloads (Pure)

Comparison of K-doped and pure cold-rolled tungsten sheets: As-rolled condition and recrystallization behaviour after isochronal annealing at different temperatures

Lied, P., Bonnekoh, C., Pantleon, W., Stricker, M., Hoffmann, A. & Reiser, J., 2019, In : International Journal of Refractory Metals and Hard Materials. 85, 19 p., 105047.

Research output: Contribution to journalJournal articleResearchpeer-review

Corrosion behaviour of Ni and nickel aluminide coatings exposed in a biomass fired power plant for two years

Wu, D. L., Dahl, K. V., Christiansen, T. L., Montgomery, M. & Hald, J., 2019, In : Surface and Coatings Technology. 362, p. 355-365

Research output: Contribution to journalJournal articleResearchpeer-review

Corrosion of welds in biomass power plants

Montgomery, M., Dahl, K. V. & Hald, J., 2019, In : Materials and Corrosion. 70, 4, p. 585-592

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
100 Downloads (Pure)

Corrosion Rate Measurement and Oxide Investigation of AC Corrosion at Varying AC/DC Current Densities

Olesen, A. J., Dideriksen, K., Nielsen, L. V. & Møller, P., 2019, In : Corrosion. 75, 9, p. 1026-1033

Research output: Contribution to journalJournal articleResearchpeer-review

Cytokine Profile in Patients with Aseptic Loosening of Total Hip Replacements and Its Relation to Metal Release and Metal Allergy

Christiansen, R. J., Münch, H. J., Bonefeld, C. M., Thyssen, J. P., Sloth, J. J., Geisler, C., Søballe, K., Jellesen, M. S. & Jakobsen, S. S., 2019, In : Journal of Clinical Medicine. 8, 8, 15 p., 1259.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
101 Downloads (Pure)

Danish Experiences in Biomass Corrosion and Recent Areas of Research

Montgomery, M., Malede, Y. C., Wu, D. & Dahl, K. V., 2019, In : Corrosion. 75, 4, p. 358-366

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
60 Downloads (Pure)

Deformation microstructures and strength of face-centered cubic high/medium entropy alloys

Yoshida, S., Ikeuchi, T., Bai, Y., Shibata, A., Hansen, N., Huang, X. & Tsuji, N., 2019, In : I O P Conference Series: Materials Science and Engineering. 580, 1, 6 p., 012053.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
56 Downloads (Pure)

Effect of ammonia addition on microstructure and wear performance of carbonitrided high carbon bearing steel AISI 52100

Liu, B., Wang, B. & Gu, J., 2019, In : Surface and Coatings Technology. 361, p. 112-118

Research output: Contribution to journalJournal articleResearchpeer-review

77 Downloads (Pure)