Materials and Surface Engineering

  1. 2020
  2. Published

    Analysis of lubricant performance in punching and blanking. / Moghadam, M.; Villa, M.; Moreau, P.; Dubois, A.; Dubar, L.; Nielsen, C. V.; Bay, N.

    In: Tribology International, Vol. 141, 105949, 2020.

    Research output: Contribution to journalJournal article – Annual report year: 2020Researchpeer-review

  3. 2019
  4. Published

    3D X-ray computerized tomography of White Etching Cracks (WEC). / Danielsen, H. K.; Carrasco, A. J.; Fæster, S.; Dahl, K. V.; Guzmán, F. Gutiérrez; Sauvage, P.; Jacobs, G.

    In: Materials Characterization, Vol. 150, 2019, p. 78-87.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  5. Published

    Analyzing Boron in 9–12% Chromium Steels Using Atom Probe Tomography. / Fedorova, Irina; Grumsen, Flemming Bjerg; Hald, John; Andrén, Hans-Olof; Liu, Fang.

    In: Microscopy and Microanalysis, Vol. 25, No. Special Issue 2, 2019, p. 462-469.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  6. Published

    An efficient approach to separate CO2 using supersonic flows for carbon capture and storage. / Wen, Chuang; Karvounis, Nikolas; Walther, Jens Honore; Yan, Yuying; Feng, Yuqing; Yang, Yan.

    In: Applied Energy, Vol. 238, 2019, p. 311-319.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  7. Published

    A sheet metal necking formability diagram for nonlinear strain paths. / Christiansen, Peter; Jensen, Mikkel Ravn Boye; Winther, Grethe.

    In: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 233, No. 7, 2019, p. 1287-1294.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  8. Accepted/In press

    Breaking the Limit of Micro-Ductility in Oxide Glasses. / Januchta, Kacper; Stepniewska, Malwina; Jensen, Lars Rosgaard; Zhang, Yang; Somers, Marcel A. J.; Bauchy, Mathieu; Yue, Yuanzheng; Smedskjær, Morten Mattrup.

    In: Advanced Science, 2019.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  9. Published

    Change of the Decorative Properties of Zinc-Plated Zinc Die Castings over Time. / Reveko, Valeriia; Lampert, Felix; Winther, Grethe; Møller, Per.

    In: International Journal of Metalcasting, Vol. 13, No. 1, 2019, p. 130-136.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  10. Published

    Characterization of blisters on powder coated aluminium AA5006 architectural profiles. / Zaffaroni, Giorgio Giovanni Battista; Gudla, Visweswara Chakravarthy; Ud Din, Rameez; Ambat, Rajan.

    In: Engineering Failure Analysis, Vol. 103, 2019, p. 347-360.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  11. Published

    Circuit analysis to predict humidity related failures in electronics - Methodology and recommendations. / Joshy, Salil; Verdingovas, Vadimas; Jellesen, Morten Stendahl; Ambat, Rajan.

    In: Microelectronics Reliability, Vol. 93, 2019, p. 81-88.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

  12. Published

    Co-existence of γ'N phase and γN phase on nitrided austenitic Fe–Cr–Ni alloys- I. experiment. / Che, H. L.; Tong, S.; Wang, K. S.; Lei, M. K.; Somers, Marcel A. J.

    In: Acta Materialia, Vol. 177, 2019, p. 35-45.

    Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

Previous 1 2 3 4 5 6 7 8 ...77 Next