• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output 1977 2020

Filter
Journal article
2020
2 Downloads (Pure)

Analysis of lubricant performance in punching and blanking

Moghadam, M., Villa, M., Moreau, P., Dubois, A., Dubar, L., Nielsen, C. V. & Bay, N., 2020, In : Tribology International. 141, 8 p., 105949.

Research output: Contribution to journalJournal articleResearchpeer-review

An application-oriented roadmap to select polymeric nanocomposites for advanced applications: A review

Doagou-Rad, S., Islam, A. & Merca, T. D., 2020, (Accepted/In press) In : Polymer Composites.

Research output: Contribution to journalJournal articleResearchpeer-review

Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel

Cao, Z., Liu, T., Yu, F., Cao, W., Zhang, X. & Weng, Y., 2020, In : International Journal of Fatigue. 131, 6 p., 105351.

Research output: Contribution to journalJournal articleResearchpeer-review

Damage evolution around white etching layer during uniaxial loading

Jessop, C., Ahlström, J., Persson, C. & Zhang, Y., 2020, In : Fatigue and Fracture of Engineering Materials and Structures. 43, 1, p. 201-208

Research output: Contribution to journalJournal articleResearchpeer-review

Effects of heat and pressure on hot-pressed geopolymer

Ranjbar, N., Kashefi, A., Ye, G. & Mehrali, M., 2020, In : Construction and Building Materials. 231, 8 p., 117106.

Research output: Contribution to journalJournal articleResearchpeer-review

Fiber-reinforced geopolymer composites: A review

Ranjbar, N. & Zhang, M., 2020, In : Cement and Concrete Composites. 107, 19 p., 103498.

Research output: Contribution to journalJournal articleResearchpeer-review

13 Downloads (Pure)

Implications of lattice structures on economics and productivity of metal powder bed fusion

Flores, I., Kretzschmar, N., Azman, A. H., Chekurov, S., Pedersen, D. B. & Chaudhuri, A., 2020, In : Additive Manufacturing. 31, 17 p., 100947.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Measurement of polymers with 3D optical scanners: evaluation of the subsurface scattering effect through five miniature step gauges: Paper

Guerra, M. G., Gregersen, S. K. S., Frisvad, J. R., De Chiffre, L., Lavecchia, F. & Galantucci, L. M., 2020, In : Measurement Science and Technology. 31, 1, 15 p., 015010.

Research output: Contribution to journalJournal articleResearchpeer-review

Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method

Xu, C. L., Andriollo, T., Zhang, Y. B., Hernando, J. C., Hattel, J. & Tiedje, N., 2020, In : Scripta Materialia. 178, p. 463 - 467

Research output: Contribution to journalJournal articleResearchpeer-review

Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys

Lozinko, A., Zhang, Y., Mishin, O. V., Klement, U. & Guo, S., 2020, In : Journal of Alloys and Compounds. 822, 7 p., 153558.

Research output: Contribution to journalJournal articleResearchpeer-review

Multi-metal additive manufacturing process chain for optical quality mold generation

Biondani, F. G., Bissacco, G., Mohanty, S., Tang, P. T. & Hansen, H. N., 2020, In : Journal of Materials Processing Technology. 277, 6 p., 116451.

Research output: Contribution to journalJournal articleResearchpeer-review

Subgrain dynamics during recovery of partly recrystallized aluminium

Ahl, S. R., Simons, H., Detlefs, C., Juul Jensen, D. & Poulsen, H. F., 2020, In : Acta Materialia. 185, p. 142-148 7 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd

Luo, X., Feng, Z., Yu, T., Luo, J., Huang, T., Wu, G., Hansen, N. & Huang, X., 2020, In : Acta Materialia. 183, p. 398-407

Research output: Contribution to journalJournal articleResearchpeer-review

Use of Miniature Step Gauges to Assess the Performance of 3D Optical Scanners and to Evaluate the Accuracy of a Novel Additive Manufacture Process

Guerra, M. G., De Chiffre, L., Lavecchia, F. & Galantucci, L. M., 2020, In : Sensors. 20, 3, 17 p., 738.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
2019

2D and 3D characterization of rolling contact fatigue cracks in manganese steel wing rails from a crossing

Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C. J. & Juul Jensen, D., 2019, In : Wear. 436-437, 202959.

Research output: Contribution to journalJournal articleResearchpeer-review

189 Downloads (Pure)

Additive Manufacturing of Microreservoir Devices for Oral Drug Delivery Using an Acculas BA-30 Micro-Stereolithography Instrument: A Feasibility Study

Vaut, L., Jensen, K. E., Tosello, G., Khosla, A., Furukawa, H. & Boisen, A., 2019, In : Journal of The Electrochemical Society. 166, 9, p. B3257-B3263

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
61 Downloads (Pure)

Alignment of sample position and rotation during in situ synchrotron X‐ray micro‐diffraction experiments using a Laue cross‐correlation approach

Zhang, C., Zhang, Y., Wu, G., Liu, W., Xu, R., Juul Jensen, D. & Godfrey, A. W., 2019, In : Journal of Applied Crystallography. 52, 5, 9 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Analysing limitations of the FlowCyl as a one-point viscometer test for cement paste

Cepuritis, R., Skare, E. L., Ramenskiy, E., Mørtsell, E., Smeplass, S., Li, S., Jacobsen, S. & Spangenberg, J., 2019, In : Construction and Building Materials. 218, p. 333-340

Research output: Contribution to journalJournal articleResearchpeer-review

8 Downloads (Pure)

Analysis and Characterization of Machined Surfaces with Aesthetic Functionality

Biondani, F. G., Bissacco, G., Pilný, L. & Hansen, H. N., 2019, In : International Journal of Automation Technology. 13, 2, p. 261-269

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

An approach to the modeling study and analysis of tool electrode wear mechanisms in micro electrical discharge milling

Puthumana, G., 2019, (Submitted) In : Journal of Advanced Mechanical Engineering. 11 p.

Research output: Contribution to journalJournal articleResearchpeer-review

A Novel Integrated Approach for Analysis and Evaluation of Control Factor Effects on Volumetric Tool Wear Rate (Vtwr) in Micro-EDM

Puthumana, G., 2019, (Submitted) In : Facta Universitatis. Series Mechanical Engineering. 17 p.

Research output: Contribution to journalJournal articleResearchpeer-review

44 Downloads (Pure)

Application of a projection method for simulating flow of a shear-thinning fluid

Jabbari, M., McDonough, J., Mitsoulis, E. & Hattel, J. H., 2019, In : Fluids . 4, 3, 16 p., 124.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
112 Downloads (Pure)

A sheet metal necking formability diagram for nonlinear strain paths

Christiansen, P., Jensen, M. R. B. & Winther, G., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 233, 7, p. 1287-1294 8 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
82 Downloads (Pure)

Benchmarking of Laser Powder Bed Fusion Machines

Moshiri, M., Candeo, S., Carmignato, S., Mohanty, S. & Tosello, G., 2019, In : Journal of Manufacturing and Materials Processing. 2019, 3, 30 p., 85.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Biomechanical, Structural and Performance Analysis of a Specific Type of Cardiac Assist Device Used in Left Ventricular Failures

Rahmani, S., Heidari, A., Saed, B., Mahpour, A., Navidbakhsh, M. & Alizadeh, M., 1 Jan 2019, In : Iranian Journal of Science and Technology - Transactions of Mechanical Engineering. 12 p.

Research output: Contribution to journalJournal articleResearchpeer-review

41 Downloads (Pure)

Breaking the Limit of Micro-Ductility in Oxide Glasses

Januchta, K., Stepniewska, M., Jensen, L. R., Zhang, Y., Somers, M. A. J., Bauchy, M., Yue, Y. & Smedskjær, M. M., 2019, In : Advanced Science. 6, 18, 9 p., 1901281.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Centrifugal and hydroplaning phenomena in high-speed polishing

Zhu, W. L., Ben Achour, S. & Beaucamp, A., 2019, In : CIRP annals. 68, 1, p. 369-372

Research output: Contribution to journalJournal articleResearchpeer-review

12 Downloads (Pure)

Comprehensive characterization and material modeling for ceramic injection molding simulation performance validations

Tosello, G., Marhöfer, D. M., Islam, A., Müller, T., Plewa, K. & Piotter, V., 2019, In : International Journal of Advanced Manufacturing Technology. 102, p. 225-240

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

COMSOL Simulation of Heat Distribution in Perovskite Solar Cells: Coupled Optical-Electrical-Thermal 3-D Analysis

Saxena, P. & Gorji, N. E., 2019, In : IEEE Journal of Photovoltaics. 9, 6, p. 1693-8

Research output: Contribution to journalJournal articleResearchpeer-review

Correlating nano-scale surface replication accuracy and cavity temperature in micro-injection moulding using in-line process control and high-speed thermal imaging

Baruffi, F., Gülçür, M., Calaon, M., Romano, J-M., Penchev, P., Dimov, S., Whiteside, B. & Tosello, G., 2019, In : Journal of Manufacturing Processes. 47, p. 367-381

Research output: Contribution to journalJournal articleResearchpeer-review

Crack formation within a Hadfield manganese steel crossing nose

Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C., Zhang, Y. & Juul Jensen, D., 2019, In : Wear. 438, 9 p., 203049.

Research output: Contribution to journalJournal articleResearchpeer-review

Current trends in micro electrical discharge machining (µEDM) for practical applications

Puthumana, G., 2019, (Submitted) In : International Journal of Automotive and Mechanical Engineering. 29 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Development and metrological validation of a new automated scanner system for freeform measurements on wind turbine blades in the production

Lyngby, R. A., Nielsen, E., De Chiffre, L., Aanæs, H. & Dahl, A. B., 1 Mar 2019, In : Precision Engineering. 56, p. 255-266

Research output: Contribution to journalJournal articleResearchpeer-review

Development of metal–graphene-filled hybrid composites: Characterization of mechanical, thermal, and electrical properties

Doagou Rad, S., Islam, A. & Alnasser, A., 2019, In : Journal of Composite Materials. 53, 24, p. 3363–3376

Research output: Contribution to journalJournal articleResearchpeer-review

Dissolution mechanism of fly ash to quantify the reactive aluminosilicates in geopolymerisation

Kuenzel, C. & Ranjbar, N., 2019, In : Resources, Conservation and Recycling. 150, 10 p., 104421.

Research output: Contribution to journalJournal articleResearchpeer-review

Effect of cutting edge micro geometry on surface generation in ball end milling

Biondani, F. G. & Bissacco, G., 2019, In : CIRP annals. 68, 1, p. 571-574 4 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Effects of DLC/TiAlN-coated die on friction and wear in sheet-metal forming under dry and oil-lubricated conditions: Experimental and numerical studies

Sulaiman, M. H., Farahana, R. N., Bienk, K., Nielsen, C. V. & Bay, N., 2019, In : Wear. 438-439, 10 p., 203040.

Research output: Contribution to journalJournal articleResearchpeer-review

Enhanced heat transfer in tubes based on vascular heat exchangers in fish: Experimental investigation

Navickaitė, K., Mocerino, A., Cattani, L., Bozzoli, F., Bahl, C., Liltrop, K., Zhang, X. & Engelbrecht, K., 2019, In : International Journal of Heat and Mass Transfer. 137, p. 192-203

Research output: Contribution to journalJournal articleResearchpeer-review

47 Downloads (Pure)

Extensional flow dynamics of polystyrene melt

Huang, Q. & Rasmussen, H. K., 2019, In : Journal of Rheology. 63, 5, p. 829-835

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
157 Downloads (Pure)

Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Davoudinejad, A., Cai, Y., Pedersen, D. B., Luo, X. & Tosello, G., 2019, In : Materials & Design. 176, 11 p., 107839.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

FlowCyl: one-parameter cement paste rheology test developed at NTNU, Norway

Cepuritis, R., Skare, E. L., Jacobsen, S., Spangenberg, J., Smeplass, S. & Mørtsell, E., 2019, In : Rheologie. 35, p. 20-24

Research output: Contribution to journalJournal articleResearchpeer-review

82 Downloads (Pure)

Fully replicable and automated retention measurement setup for characterization of bio-adhesion

Vaut, L., Scarano, E., Tosello, G. & Boisen, A., 2019, In : HardwareX. 6, 35 p., e00071.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Functionality characterization of injection moulded micro-structured surfaces

Regi, F., Doest, M., Loaldi, D., Li, D., Frisvad, J. R., Tosello, G. & Zhang, Y., 2019, In : Precision Engineering. 60, p. 594-601

Research output: Contribution to journalJournal articleResearchpeer-review

84 Downloads (Pure)

Geometric Form of Gating System Elements and Its Influence on the Initial Filling Phase

Dojka, R., Jezierski, J. & Tiedje, N. S., 2019, In : Journal of Materials Engineering and Performance. 28, 7, p. 3922–3928

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
24 Downloads (Pure)

Gradient Microstructure in a Gear Steel Produced by Pressurized Gas Nitriding

Yang, R., Wu, G., Zhang, X., Fu, W., Hansen, N. & Huang, X., 2019, In : Materials. 12, 22, 12 p., 3797.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File