• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output 1977 2020

Filter
Poster
2019
7 Downloads (Pure)

Comparison of Selective Laser Melting Post-Processes based on Amplitude and Functional Surface Roughness parameters

Loaldi, D., Kain, M., Haahr‐Lillevang, L., Vedel-Smith, N. K. & Tosello, G., 2019. 2 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
14 Downloads (Pure)

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, D., Quagliotti, D., Calaon, M., Czolkos, I., Johansson, A., Nielsen, T., Garnaes, J. & Tosello, G., 2019, p. 1.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
2018
104 Downloads (Pure)

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
60 Downloads (Pure)

Dimensional Accuracy and Repeatability of 3D Printed Mould Inserts by DLP

Thorn, S., Bertelsen, J. G., M. Ribo, M., Li, D., Regi, F., Davoudinejad, A. & Zhang, Y., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
45 Downloads (Pure)

Dimensional Accuracy and Repeatability of Mould Inserts Manufactured by Mask Projection Vat-Photopolymerization

Bertelsen, J. G., Thorn, S., M. Ribo, M., Li, D., Regi, F., Davoudinejad, A., Zhang, Y. & Tosello, G., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
55 Downloads (Pure)

Evaluation of injection pressure as a process fingerprint for Injection and Injection Compression Molding of micro structured optical components

Loaldi, D., Calaon, M., Quagliotti, D., Parenti, P., Annoni, M. & Tosello, G., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
64 Downloads (Pure)

Evaluation of part consistency with photopolymer inserts in different injection moulding process parameters

Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Tosello, G. & Hansen, H. N., 2018. 2 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
112 Downloads (Pure)

Grand Solutions - Augmented Cellular Meat Production (ACMP)

Sonne, M. R., Andriollo, T. & Hattel, J. H., 2018. 1 p.

Research output: Contribution to conferencePosterResearch

Open Access
File
61 Downloads (Pure)
Open Access
File
104 Downloads (Pure)

Prediction of micro-sized flash using micro-injection moulding process simulations

Baruffi, F., Calaon, M. & Tosello, G., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
88 Downloads (Pure)

Process parameter influence on Electro-sinter-forging (ESF) of titanium discs

Cannella, E., Nielsen, C. V. & Bay, N., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
55 Downloads (Pure)

Structural “decoration” of plastic products replicated from nanoimprinted steel inserts

Loaldi, D., Calaon, M., Quagliotti, D., Johansson, A., Czolkos, I., Nielsen, T. & Tosello, G., 2018. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
2017
197 Downloads (Pure)

3D Finite Element Modelling of Drilling Process of Al2024-T3 Alloy with solid tooling and Experimental Validation

Davoudinejad, A. & Tosello, G., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
301 Downloads (Pure)

3D Printing of Bio-inspired surfaces

Méndez Ribó, M. & Islam, A., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
195 Downloads (Pure)

A comparison of reflectance properties on polymer micro-structured functional surface

Regi, F., Li, D., Nielsen, J. B., Zhang, Y., Tosello, G., Madsen, M. H., Frisvad, J. R. & Aanæs, H., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
129 Downloads (Pure)

Application of silicone based elastomers for manufacturing of Green Fiber Bottle

Saxena, P. & Bissacco, G., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
59 Downloads (Pure)

A preliminary study on replication and quality correlation of on-part and on-runner polymer injection moulded micro features

Giannekas, N., Tosello, G. & Zhang, Y., 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
254 Downloads (Pure)

Geometrically Optimized 3D Printed Mini-Devices for Oral Drug Delivery

Vaut, L., Juszczyk, J. J., Jensen, K. E., Andersen, A. J., Tosello, G. & Boisen, A., 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
135 Downloads (Pure)

Investigation of process parameters influence on flash formation in injection moulding of polymer micro features through design of experiments

Eladl, A., Tosello, G., Mostafa, R., Soltan, H. & Hansen, H. N., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
148 Downloads (Pure)

Laser confocal microscope noise evaluation on injection compression moulded (ICM) transparent polymer Fresnel lenses

Loaldi, D., Calaon, M., Quagliotti, D., Baruffi, F., Parenti, P., Tosello, G. & Annoni, M., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
52 Downloads (Pure)

On the performance of micro injection moulding process simulations of TPE micro rings

Baruffi, F., Calaon, M. & Tosello, G., 2017. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
242 Downloads (Pure)

Replication quality assessment and uncertainty evaluation of a polymer precision injection moulded component

Baruffi, F., Calaon, M., Tosello, G., Hansen, H. N., Prantl, M. & Miller, N., 2017. 2 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
2016
209 Downloads (Pure)

Comparison of measurements from optical CMM and focus-variation microscope of a μPIM mechanical part

Quagliotti, D., Salaga, J., Tosello, G. & Hansen, H. N., 2016. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
99 Downloads (Pure)

Computed Tomography characterization of the Green Fiber Bottle

Saxena, P. & Bissacco, G., 2016. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
149 Downloads (Pure)

Contact area measurements on structured surfaces

Kücükyildiz, Ö. C., Jensen, S. H. N. & De Chiffre, L., 2016. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
133 Downloads (Pure)

Metrology of sub-micron structured polymer surfaces

Quagliotti, D., Tosello, G., Salaga, J., Baruffi, F., Hansen, H. N. & Gasparin, S., 2016. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
447 Downloads (Pure)

Performance verification of focus variation and confocal microscopes measuring tilted ultra-fine surfaces

Quagliotti, D., Baruffi, F., Tosello, G., Gasparin, S., Annoni, M., Parenti, P., Sobiecki, R. & Hansen, H. N., 2016. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
2015
128 Downloads (Pure)

Development of a multisensory arm for process monitoring in Robot Assisted Polishing

Pilny, L., Dalla Costa, G., Bissacco, G. & De Chiffre, L., 2015. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
118 Downloads (Pure)

Experimental Investigation of a Basalt Fiber Reinforced Composite toMetal Joint

Costache, A., Glejbøl, K., Sivebæk, I. M. & Berggreen, C., 2015.

Research output: Contribution to conferencePosterResearch

File
595 Downloads (Pure)

Life Cycle Assessment of Injection Molding Inserts: Additively Manufactured, in Brass, and in Steel

Mischkot, M., Hofstätter, T., Bey, N. & Lunzer, A., 2015. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
92 Downloads (Pure)
Open Access
File
145 Downloads (Pure)

Optical micro-metrology of structured surfaces micro-machined by jet-ECM

Quagliotti, D., Tosello, G., Islam, A., Hansen, H. N., Zeidler, H., Martin, A., Schubert, A., Brandao, C. & Riemer, O., 2015. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

File
2014
168 Downloads (Pure)

Inter laboratory comparison on Industrial Computed Tomography: CIA-CT comparison

Angel, J. A. B. & De Chiffre, L., 2014. 1 p.

Research output: Contribution to conferencePosterResearch

File
85 Downloads (Pure)

The effect of scattered light sensor orientation on roughness measurement of curved polished surfaces

Pilny, L., Bissacco, G. & De Chiffre, L., 2014. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
78 Downloads (Pure)
File
2013
41 Downloads (Pure)

Dimensional verification of high aspect ratio micro structures using FIB-SEM

Zhang, Y. & Hansen, H. N., 2013. 1 p.

Research output: Contribution to conferencePosterResearch

File
416 Downloads (Pure)

Nanopatterning of Polymer Replication Tools

Cech, J., Sonne, M. R., Pranov, H., Kofod, G., Matschuk, M., Murthy, S., Lam, Y. C., Hattel, J. H. & Taboryski, R. J., 2013.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
2012
90 Downloads (Pure)
Open Access
File
82 Downloads (Pure)

Effective viscosity of polymers

Sivebæk, I. M., Samoilov, V. N. & Persson, B. N. J., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File
160 Downloads (Pure)

Improvement of Feeder Technologies for Energy Savings in Cast Iron Foundries

Vedel-Smith, N. K., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File
55 Downloads (Pure)

Strongly non-linear extensional stress is not dominated by finite chain extensibility in polystyrene melts undergoing large steady rate extensional flows.

Almdal, K., Hassager, O., Mortensen, K., Bach, A., Rasmussen, H. K. & Pyckhout-Hintzen, W., 2012. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
2010
130 Downloads (Pure)

Effects of moulding and environmental conditions on the mechanical and surface properties of injection moulded santoprene rubber

Islam, A., Ruby, T. M. & Jessen, R. L., 2010.

Research output: Contribution to conferencePosterResearch

File

Multi-objective Optimization of Process Parameters in Friction Stir Welding

Tutum, C. C. & Hattel, J. H., 2010.

Research output: Contribution to conferencePosterResearchpeer-review

167 Downloads (Pure)

Polymer friction Molecular Dynamics

Sivebæk, I. M., Samoilov, V. N. & Persson, B. N. J., 2010.

Research output: Contribution to conferencePosterResearchpeer-review

File

Reversed extensional flow on polyisoprene melts

Bejenariu, A. G., Rasmussen, H. K., Auhl, D., Skov, A. L. & Hassager, O., 2010.

Research output: Contribution to conferencePosterResearch

2009
287 Downloads (Pure)

Active Magnetic Regenerative Refrigeration

Nielsen, K. K., Engelbrecht, K., Bahl, C. R. H., Smith, A., Pryds, N. & Hattel, J. H., 2009.

Research output: Contribution to conferencePosterResearch

Open Access
File

Characterization of Coated Sand Cores from Two Different Binder Systems for Grey Iron Castings

Nwaogu, U. C., Tiedje, N. S., Poulsen, T. & Bischoff, C., 2009.

Research output: Contribution to conferencePosterResearch

2008

Integration of LCA in Micro/Nano products and production pathways

Olsen, S. I. & De Grave, A., 2008.

Research output: Contribution to conferencePosterResearch

Multibeam Fibre Laser Cutting

Olsen, F. O., 2008.

Research output: Contribution to conferencePosterResearchpeer-review

Robust Optimization of Thermal Aspects of Friction Stir Welding Using Manifold Mapping Techniques

Larsen, A. A., L, D., Schmidt, H. N. B., Hattel, J. H. & Bendsøe, M. P., 2008.

Research output: Contribution to conferencePosterResearch