• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output 1977 2020

Filter
Paper
2020

Reference standards for XCT measurements of additively manufactured parts

Obaton, A-F., Klingaa, C. G., Rivet, C., Mohaghegh, K., Baier, S., Andreasen, J. L., Carli, L. & De Chiffre, L., 2020. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
2019

Microproportioning paste with crushed aggregate filler by use of specific surface area

Skare, E. L., Cepuritis, R., Spangenberg, J., Ramenskiy, E., Mørtsell, E., Smeplass, S. & Jacobsen, S., 2019. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

2018
108 Downloads (Pure)
Open Access
File
51 Downloads (Pure)

Decreasing the Magnitude of Shear Rates in the FlowCyl

Skare, E. L., Jacobsen, S., Cepuritis, R., Smeplass, S. & Spangenberg, J., 2018. 7 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
156 Downloads (Pure)

Evaluation of an improved micro milling strategy for the generation of tool steel micro features with optical functionality

Li, D., Davoudinejad, A., Zhang, Y. & Tosello, G., 2018. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File

Methodologies for characterization of smearing micro geometry on ball end milled tool steel surfaces

Biondani, F. G., Bissacco, G. & Hansen, H. N., 2018. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

117 Downloads (Pure)

Multi-Scale Multiphysics Simulation of Metal L-PBF AM Process and Subsequent Mechanical Analysis

Bayat, M., De Baere, D., Mohanty, S. & Hattel, J. H., 2018. 20 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
133 Downloads (Pure)

Numerical Modelling of Mechanical Anisotropy during Low Temperature Nitriding of Stainless Steel

Kücükyildiz, Ö. C., Sonne, M. R., Thorborg, J., Winther, G., Hattel, J. H. & Somers, M. A. J., 2018. 7 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
112 Downloads (Pure)

Thermo-fluid-metallurgical modelling of laser-based powder bed fusion process

Bayat, M., Mohanty, S. & Hattel, J. H., 2018. 7 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
126 Downloads (Pure)

Tool condition monitoring in strip reduction testing using acoustic emission

Moghadam, M., Nielsen, C. V., Christiansen, P. & Bay, N., 2018. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
172 Downloads (Pure)

Tool design and materials for electro sinter forging (ESF)

Cannella, E. & Nielsen, C. V., 2018. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
40 Downloads (Pure)

Zero Defects manufacturing in Injection Compression Molding of Polymer Fresnel Lenses

Loaldi, D., Calaon, M., Parenti, P., Tosello, G. & Annoni, M., 2018. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
2017
118 Downloads (Pure)

2D Numerical Modelling of the Resin Injection Pultrusion Process Including Experimental Resin Kinetics and Temperature Validation

Rasmussen, F. S., Sonne, M. R., Larsen, M., Spangenberg, J., Lilleheden, L. T. & Hattel, J. H., 2017. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
106 Downloads (Pure)

A study on replication and quality correlation of on-part and on-runner polymer injection molded micro features

Giannekas, N., Tosello, G. & Zhang, Y., 2017. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
187 Downloads (Pure)

Characterization of additive manufacturing processes for polymer micro parts productions using direct light processing (DLP) method

Davoudinejad, A., Pedersen, D. B. & Tosello, G., 2017. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
112 Downloads (Pure)

Dimensional accuracy of Acrylonitrile Butadiene Styrene injection molded parts produced in a pilot produc

Mischkot, M., Davoudinejad, A., Charalambis, A., Hofstätter, T., Tosello, G., Pedersen, D. B. & Hansen, H. N., 2017. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
1 Downloads (Pure)

Economic Analysis of Additive Manufacturing Integration in Injection Molding Process Chain

Charalambis, A., Kerbache, L., Tosello, G., Pedersen, D. B. & Mischkot, M., 2017. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

360 Downloads (Pure)

Evaluation of surface roughness and geometrical characteristic of additive manufacturing inserts for precision injection moulding

Davoudinejad, A., Charalambis, A., Pedersen, D. B. & Tosello, G., 2017. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
167 Downloads (Pure)

FlowCyl: one-parameter characterisation of matrix rheology

Cepuritis, R., Ramenskiy, E., Mørtsell, E., Smeplass, S., Kjos-Hanssen, H. S., Li, S., Jacobsen, S. & Spangenberg, J., 2017. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
656 Downloads (Pure)

Green fiber bottle: Towards a sustainable package

Didone, M., Tosello, G. & Howard, T. J., 2017. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
124 Downloads (Pure)

Green Fiber Bottle: Towards a Sustainable Package and a Manufacturing Process

Didone, M., Tosello, G., Kirilov, K., Bardenstein, A. & Østergaard, S., 2017. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
156 Downloads (Pure)

Influence of Injection-Molding Process Parameters on Part Replication of Microstructures with Additively-Manufactured Soft Tooling Inserts WCMNM 2017 No.

Mischkot, M., Zhang, Y., Segebrecht Gøtje, A., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
82 Downloads (Pure)

Investigation of the mechanical properties of GNP/MWCNT reinforced PA66 hybrid nanocomposites

Doagou Rad, S., Islam, A. & Søndergaard Jensen, J., 2017. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
228 Downloads (Pure)

Investigation on the micro injection molding process of an overmolded multi-material micro component

Baruffi, F., Calaon, M., Tosello, G. & Elsborg, R., 2017. 5 p.

Research output: Contribution to conferencePaperResearchpeer-review

File

Molding 4.0 - The Economics of an Injection Molding As-a-Service Business Model

Charalambis, A., Tonetti, M. A. & Tosello, G., 2017. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

113 Downloads (Pure)

Numerical modelling of the bonding process for wind turbine blades: model validation

Uzal, A., Spangenberg, J., W. Nielsen, M., Sonne, M. R. & Hattel, J. H., 2017. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
103 Downloads (Pure)

The effect of saturation on resin flow in injection pultrusion: a preliminary numerical study

Spangenberg, J., Larsen, M., R. Rodríguez, R., M. M. Sánchez, P., Rasmussen, F. S., Sonne, M. R. & Hattel, J. H., 2017. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
134 Downloads (Pure)

The Particle-Matrix model: limitations and further improvements needed

Cepuritis, R., Jacobsen, S. & Spangenberg, J., 2017. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
393 Downloads (Pure)

Thermal modelling of extrusion based additive manufacturing of composite materials

Jensen, M. L., Sonne, M. R., Hattel, J. H. & Hansen, H. N., 2017. 12 p.

Research output: Contribution to conferencePaperResearchpeer-review

File
362 Downloads (Pure)

Tolerances in micro manufacturing

Hansen, H. N., Zhang, Y. & Islam, A., 2017. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
2013
625 Downloads (Pure)

Acoustic Emission Based In-process Monitoring in Robot Assisted Polishing

Pilny, L., Bissacco, G., De Chiffre, L. & Ramsing, J., 2013. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

File
1087 Downloads (Pure)

A new numerical framework to simulate viscoelastic free-surface flows with the finite-volume method

Comminal, R., Spangenberg, J. & Hattel, J. H., 2013. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
128 Downloads (Pure)

Manufacturing involving forging of multiple objects in contact

Nielsen, C. V., Zhang, W., Martins, P. A. F. & Bay, N., 2013. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

File
279 Downloads (Pure)

Off-line testing of alternative of industrial lubricants and different tool materials for cold rolling of stainless steel

Tahir, M., Jonsson, N-G., Lagergren, J. & Ceron, E., 2013. 12 p.

Research output: Contribution to conferencePaperResearchpeer-review

File

Quantification of Feeding Effects of Spot Feeding Ductile Iron Castings made in Vertically Parted Moulds

Vedel-Smith, N. K., Tiedje, N. S., Sällström, J. & Maza, K. T., 2013. 11 p.

Research output: Contribution to conferencePaperResearch

Surface roughness characterization of cast components using 3D optical methods.

Nwaogu, U. C., Tiedje, N. S. & Hansen, H. N., 2013. 31 p.

Research output: Contribution to conferencePaperResearch

2012
286 Downloads (Pure)

Investigation on the influence of image quality in X-ray CT metrology

Müller, P., Hiller, J., Cantatore, A., Bartscher, M. & De Chiffre, L., 2012. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

File
2011

Ensaio de Compressão com Discos Empilhados

Alves, L. M. M., Nielsen, C. V. & Martins, P. A. I., 2011.

Research output: Contribution to conferencePaperResearch