• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Conference abstract for conference

3-D Analysis of Graphite Nodules in Ductile Cast Iron Using FIB-SEM

D'Angelo, L., Jespersen, F. N., MacDonald, A. N., da Silva Fanta, A. B., Horsewell, A. & Tiedje, N. S., 2009.

Research output: Contribution to conferenceConference abstract for conferenceResearch

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
19 Downloads (Pure)

Activity-based Sustainability Assessment of Highly Automated Manufacturing

Rödger, J-M., Bey, N. & Alting, L., 2016.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
120 Downloads (Pure)

Addressing the mechanical deformation of flexible stamps for nanoimprint lithography on double-curved surfaces

Sonne, M. R., Hattel, J. H. & Kristensen, A., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

File
90 Downloads (Pure)

A fully-coupled approach combining plastic deformation and liquid lubrication

Üstünyagiz, E., Christiansen, P., Nielsen, C. V., Bay, N. O. & Martins, P. A. F., 2016. 3 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Application of nanometrology to polymer production

Garnaes, J., Tanzi, S., Calaon, M., Cech, J., Taboryski, R. J., Hansen, H. N., Nørregaard, J., Madsen, M. H., Hansen, P-E., Sonne, M. R., Pranov, H., Kofod, G., Lam, Y. C., Hattel, J. H., Matteucci, M., Christiansen, T. L., Friis, S., Thylstrup Christensen, M., Li, W., Wilson, S. & 2 others, Kutchinsky, J. & Tosello, G., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Are Entangled Polymer Melts Different From Solutions?

Huang, Q., Mednova, O., Rasmussen, H. K., Skov, A. L., Almdal, K. & Hassager, O., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
194 Downloads (Pure)

A simulation of the effect of TWD (tool wear per discharge) estimation error on the depth of machined surfaces in micro-EDM milling

Puthumana, G., Bissacco, G. & Hansen, H. N., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
161 Downloads (Pure)

A TEM Study on the Microstructure of Fine Flaky Graphite

Moumeni, E., Tiedje, N. S., Horsewell, A. & Hattel, J. H., 2012. 9 p.

Research output: Contribution to conferenceConference abstract for conferenceResearch

File
846 Downloads (Pure)

Characterization of nano-scale finished surfaces

Hansen, H. N. & De Chiffre, L., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Characterization of smearing patterns in ball nose end milling process

Biondani, F., Bissacco, G. & Hansen, H. N., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
41 Downloads (Pure)

Comparison of cutting edge characterization techniques applied to industrial tools with sub micrometer edge radius

Biondani, F., Bissacco, G., Garnæs, J. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
26 Downloads (Pure)

Comparison of Selective Laser Melting Post-Processes based on Amplitude and Functional Surface Roughness parameters

Loaldi, D., Kain, M., Haahr‐Lillevang, L., Vedel-Smith, N. K. & Tosello, G., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
14 Downloads (Pure)

Deformation Assisted Joining

Bay, N., Alves, L. M., Nielsen, C. V., Silva, C. M. A. & Martins, P. A. F., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
19 Downloads (Pure)

Determination of stamp deformation during imprinting on semi-spherical surfaces

Kafka, J., Matschuk, M., Pranov, H., Kofod, G., Taboryski, R. J., Sonne, M. R. & Lam, Y. C., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
90 Downloads (Pure)

Development of Highly Conductive Hybrid Composites

Islam, A. & Rad, S. D., 2018, p. 9-10.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
68 Downloads (Pure)

Direct manufacturing of μm structured surfaces by vat potopolymerization method

Davoudinejad, A., Pedersen, D. B. & Tosello, G., 2018. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
36 Downloads (Pure)

Effective Viscosity of Confined Hydrocarbons

Sivebæk, I. M., Samoilov, V. N. & Persson, B. N. J., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
144 Downloads (Pure)

Effect of Functional Nano Channel Structures Different Widths on Injection Molding and Compression Molding Replication Capabilities

Calaon, M., Tosello, G., Garnaes, J. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
85 Downloads (Pure)

Effect of titanium on the near eutectic grey iron

Moumeni, E., Tiedje, N. S. & Hattel, J. H., 2012. 10 p.

Research output: Contribution to conferenceConference abstract for conferenceResearch

File
1627 Downloads (Pure)

Effect of TWD estimation error on the depth of machined cavities in micro-EDM milling

Puthumana, G., Bissacco, G. & Hansen, H. N., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Electrochemical based processes enabling different replication steps for large area low cost surface nano structuring

Calaon, M., Hansen, H. N., Tosello, G., Garnaes, J., Tang, P. T. & Ravn, C., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
148 Downloads (Pure)

Electro sinter forging of titanium disks

Cannella, E., Nielsen, C. V. & Bay, N. O., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
69 Downloads (Pure)

Establishment of traceability in measurement of micro components

Hansen, H. N., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Evaluation of tribosystems for sheet metal forming

Moghadam, M., Üstünyagiz, E. & Nielsen, C. V., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
21 Downloads (Pure)

Extensional rheology of entangled polystyrene solutions suggests importance of nematic interactions

Huang, Q., Javier Alvarez, N., Matsumiya, Y., Rasmussen, H. K., Watanabe, H. & Hassager, O., 2013.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Extension of cylindrical samples in the Sentmanat Extensional Rheometer (SER)

Yu, K., Marin, J. M. R., Jensen, M. K., Rasmussen, H. K. & Hassager, O., 2010.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
201 Downloads (Pure)

Fabrication and characterization of porous-core honeycomb bandgap THz fibers

Bao, H., Nielsen, K., Rasmussen, H. K., Jepsen, P. U. & Bang, O., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
212 Downloads (Pure)

Filament Stretching Rheometry

Hassager, O., Huang, Q., Yu, K., Román Marín, J. M., Skov, A. L. & Rasmussen, H. K., 2011.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
130 Downloads (Pure)

Flow and Failure in Extension of Monodisperse Polymer Melts

Rasmussen, H. K., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Fluid flow modelling in tape casting of ceramics: analytical and numerical approaches

Jabbari, M. & Hattel, J. H., 2014. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
52 Downloads (Pure)

Free-form nanostructured tools for plastic injection moulding

Kafka, J., Sonne, M. R., Lam, Y. C., Matschuk, M., Pranov, H., Taboryski, R. J. & Kofod, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
347 Downloads (Pure)

Friction of polymers: New experimental and theoretical advances

Sivebæk, I. M., Samoilov, V. N. & Persson, B. N. J., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
247 Downloads (Pure)

Geometrically Optimized 3D Printed Mini-Devices for Oral Drug Delivery

Vaut, L., Jensen, K. E., Andersen, A. J., Tosello, G. & Boisen, A., 2017.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
131 Downloads (Pure)

Green Fiber Bottle: the fully biodegradable packaging

Didone, M. & Tosello, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
245 Downloads (Pure)

Hierarchical Structure and Strengthening Mechanisms in Pearlitic Steel Wire

Zhang, X., Hansen, N., Huang, X. & Godfrey, A. W., 2017.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
105 Downloads (Pure)

Improving the accuracy of micro injection moulding process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2013. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
147 Downloads (Pure)

Injection Moulding optimization of nanostructured components using surface fingerprint

Loaldi, D., Zhang, Y., Calaon, M., Quagliotti, D. & Tosello, G., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Injection Moulding Simulation and Experimental Validation of Hearing Aid Shells

Islam, A. & Li, X., 2017. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
69 Downloads (Pure)

Integration of LCA in design of micro/nano products and production pathways

Olsen, S. I. & De Grave, A., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Investigation of Tooling for Anisotropic Optical Functional Surfaces

Li, D., Regi, F., Zhang, Y., Madsen, M. H., Nielsen, J. B. & Tosello, G., 2017. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
103 Downloads (Pure)

Lessons learned from Entrepreneurial Hot-spots and Academic Entrepreneurship in North America

Eriksen, R. S., 2007.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
113 Downloads (Pure)

Material Removal Mechanisms Analysis in the dry Electrical Discharge Machining and Possibilities for Micro-machining Applications

Puthumana, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
59 Downloads (Pure)

Measurement noise of a point autofocus surface topography instrument

Feng, X., Quagliotti, D., Maculotti, G., P. Syam, W., Tosello, G., Hansen, H. N., Galetto, M. & Leach, R., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
59 Downloads (Pure)

Metrology of sub-micron structured polymer surfaces

Quagliotti, D., Tosello, G., Salaga, J., Baruffi, F., Hansen, H. N. & Gasparin, S., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
119 Downloads (Pure)

Micro Factory - design and realisation

Hansen, H. N., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Micro injection moulding process optimization of an ultra-small POM three-dimensional component

Baruffi, F., Calaon, M. & Tosello, G., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
60 Downloads (Pure)

Micro injection moulding process validation for high precision manufacture of thermoplastic elastomer micro suspension rings

Calaon, M., Tosello, G., Elsborg Hansen, R. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
66 Downloads (Pure)

Modeling constitutive and micro-scale frictional behavior of PTFE

Sonne, M. R., Nørregaard, J. & Hattel, J. H., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
54 Downloads (Pure)