• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Conference abstract for conference
2007

Lessons learned from Entrepreneurial Hot-spots and Academic Entrepreneurship in North America

Eriksen, R. S., 2007.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
113 Downloads (Pure)
2008

Characterization of nano-scale finished surfaces

Hansen, H. N. & De Chiffre, L., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Establishment of traceability in measurement of micro components

Hansen, H. N., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Friction of polymers: New experimental and theoretical advances

Sivebæk, I. M., Samoilov, V. N. & Persson, B. N. J., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Integration of LCA in design of micro/nano products and production pathways

Olsen, S. I. & De Grave, A., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Micro Factory - design and realisation

Hansen, H. N., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Quality control of micro objects

Hansen, H. N., 2008.

Research output: Contribution to conferenceConference abstract for conferenceResearch

2009

3-D Analysis of Graphite Nodules in Ductile Cast Iron Using FIB-SEM

D'Angelo, L., Jespersen, F. N., MacDonald, A. N., da Silva Fanta, A. B., Horsewell, A. & Tiedje, N. S., 2009.

Research output: Contribution to conferenceConference abstract for conferenceResearch

2010

Extension of cylindrical samples in the Sentmanat Extensional Rheometer (SER)

Yu, K., Marin, J. M. R., Jensen, M. K., Rasmussen, H. K. & Hassager, O., 2010.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
201 Downloads (Pure)

Modeling of dual cylinder wind-up extensional rheometers

Yu, K., Marin, J., Jensen, M., Rasmussen, H. K. & Hassager, O., 2010.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Reversible large amplitude planar extension of soft elastomers

Jensen, M. K., Skov, A. L., Rasmussen, H. K. & Hassager, O., 2010.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
58 Downloads (Pure)

Reversible planar elongational of soft polymeric networks

Jensen, M. K., Skov, A. L., Rasmussen, H. K. & Hassager, O., 2010.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
48 Downloads (Pure)
2011

Filament Stretching Rheometry

Hassager, O., Huang, Q., Yu, K., Román Marín, J. M., Skov, A. L. & Rasmussen, H. K., 2011.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
130 Downloads (Pure)

Stress maximum and steady extensional flow of branched polymer melts

Huang, Q., Skov, A. L., Rasmussen, H. K., Hoyle, D. M., McLeish, T. C., Harlen, O., Hassel, D., Lord, T. D., Mackley, M. R. & Hassager, O., 2011.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
65 Downloads (Pure)
2012

Addressing the mechanical deformation of flexible stamps for nanoimprint lithography on double-curved surfaces

Sonne, M. R., Hattel, J. H. & Kristensen, A., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

File
90 Downloads (Pure)

Are Entangled Polymer Melts Different From Solutions?

Huang, Q., Mednova, O., Rasmussen, H. K., Skov, A. L., Almdal, K. & Hassager, O., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
194 Downloads (Pure)

A TEM Study on the Microstructure of Fine Flaky Graphite

Moumeni, E., Tiedje, N. S., Horsewell, A. & Hattel, J. H., 2012. 9 p.

Research output: Contribution to conferenceConference abstract for conferenceResearch

File
846 Downloads (Pure)

Effective Viscosity of Confined Hydrocarbons

Sivebæk, I. M., Samoilov, V. N. & Persson, B. N. J., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
144 Downloads (Pure)

Effect of titanium on the near eutectic grey iron

Moumeni, E., Tiedje, N. S. & Hattel, J. H., 2012. 10 p.

Research output: Contribution to conferenceConference abstract for conferenceResearch

File
1627 Downloads (Pure)

Flow and Failure in Extension of Monodisperse Polymer Melts

Rasmussen, H. K., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Prediction of internal strains during curing, post-curing and demoulding of thick glass/epoxy composite - Analysis of different constitutive models

Nielsen, M. W., Schmidt, J. W. & Hattel, J. H., 2012. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearch

File
225 Downloads (Pure)

Process Simulation of Resistance Weld Bonding and Automotive Light-weight Materials

Zhang, W., Chergui, A. & Nielsen, C. V., 2012. 9 p.

Research output: Contribution to conferenceConference abstract for conferenceResearch

File
747 Downloads (Pure)

Single-sided sheet-to-tube spot welding investigated by 3D numerical simulations

Nielsen, C. V., Chergui, A. & Zhang, W., 2012. 12 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
2103 Downloads (Pure)

Transient Overshoot Extensional Rheology: Experimental and Numerical Comparisons

Hoyle, D., Huang, Q., Auhl, D., Rasmussen, H. K., Skov, A. L., Harlen, O., Hassager, O. & McLeish, T., 2012.

Research output: Contribution to conferenceConference abstract for conferenceResearch

Open Access
File
86 Downloads (Pure)
2013

Application of nanometrology to polymer production

Garnaes, J., Tanzi, S., Calaon, M., Cech, J., Taboryski, R. J., Hansen, H. N., Nørregaard, J., Madsen, M. H., Hansen, P-E., Sonne, M. R., Pranov, H., Kofod, G., Lam, Y. C., Hattel, J. H., Matteucci, M., Christiansen, T. L., Friis, S., Thylstrup Christensen, M., Li, W., Wilson, S. & 2 others, Kutchinsky, J. & Tosello, G., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Extensional rheology of entangled polystyrene solutions suggests importance of nematic interactions

Huang, Q., Javier Alvarez, N., Matsumiya, Y., Rasmussen, H. K., Watanabe, H. & Hassager, O., 2013.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Fabrication and characterization of porous-core honeycomb bandgap THz fibers

Bao, H., Nielsen, K., Rasmussen, H. K., Jepsen, P. U. & Bang, O., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
212 Downloads (Pure)

Improving the accuracy of micro injection moulding process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2013. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
147 Downloads (Pure)

Modeling constitutive and micro-scale frictional behavior of PTFE

Sonne, M. R., Nørregaard, J. & Hattel, J. H., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
54 Downloads (Pure)

Modeling the mechanical deformation of PTFE flexible stamps for nanoimprint lithography on double-curved surfaces

Sonne, M. R., Smistrup, K., Nørregaard, J. & Hattel, J. H., 2013. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
167 Downloads (Pure)

Stress relaxation of entangled polystyrene solution after constant-rate, uniaxial elongation

Matsumiya, Y., Masubuchi, Y., Watanabe, H., Huang, Q., Rasmussen, H. K., Javier Alvarez, N. & Hassager, O., 2013.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Surface replication assessment of sub-µm structures by atomic force microscopy

Calaon, M., Tosello, G., Tang, P. T., Nørregaard, J., Garnaes, J. & Hansen, H. N., 2013. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

2014

Fluid flow modelling in tape casting of ceramics: analytical and numerical approaches

Jabbari, M. & Hattel, J. H., 2014. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
52 Downloads (Pure)

Polymer Replication of a Randomly Nanostructured Insert with and without Induction Heating of the Mold

Menotti, S., Tang, P. T. & Hansen, H. N., 2014. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
131 Downloads (Pure)

Replication of micro structured surface by injection moulding of PEEK

Zhang, Y., Hansen, H. N. & Sørensen, S., 2014.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Towards nanoimprint lithography on free-form surfaces: A global/local modelling approach for predicting the deformation of the flexible stamp

Sonne, M. R., Smistrup, K. & Hattel, J. H., 2014. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
48 Downloads (Pure)
2015

Effect of Functional Nano Channel Structures Different Widths on Injection Molding and Compression Molding Replication Capabilities

Calaon, M., Tosello, G., Garnaes, J. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
85 Downloads (Pure)

Electrochemical based processes enabling different replication steps for large area low cost surface nano structuring

Calaon, M., Hansen, H. N., Tosello, G., Garnaes, J., Tang, P. T. & Ravn, C., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
148 Downloads (Pure)

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
247 Downloads (Pure)

Micro injection moulding process validation for high precision manufacture of thermoplastic elastomer micro suspension rings

Calaon, M., Tosello, G., Elsborg Hansen, R. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
66 Downloads (Pure)

Optical characterization of roughness on polished steel surfaces

Feidenhans'l, N. A., Hansen, P-E., Pilny, L., Petersen, J. C. & Taboryski, R. J., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
90 Downloads (Pure)

Replication fidelity assessment of polymer large area sub-μm structured surfaces using fast angular intensity distribution measurements.

Calaon, M., Hansen, H. N., Tosello, G., Weirich, J., Garnæs, J. & Tang, P. T., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
51 Downloads (Pure)
2016

Activity-based Sustainability Assessment of Highly Automated Manufacturing

Rödger, J-M., Bey, N. & Alting, L., 2016.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
120 Downloads (Pure)

A fully-coupled approach combining plastic deformation and liquid lubrication

Üstünyagiz, E., Christiansen, P., Nielsen, C. V., Bay, N. O. & Martins, P. A. F., 2016. 3 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

A simulation of the effect of TWD (tool wear per discharge) estimation error on the depth of machined surfaces in micro-EDM milling

Puthumana, G., Bissacco, G. & Hansen, H. N., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
161 Downloads (Pure)

Comparison of cutting edge characterization techniques applied to industrial tools with sub micrometer edge radius

Biondani, F., Bissacco, G., Garnæs, J. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
26 Downloads (Pure)

Determination of stamp deformation during imprinting on semi-spherical surfaces

Kafka, J., Matschuk, M., Pranov, H., Kofod, G., Taboryski, R. J., Sonne, M. R. & Lam, Y. C., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
90 Downloads (Pure)

Free-form nanostructured tools for plastic injection moulding

Kafka, J., Sonne, M. R., Lam, Y. C., Matschuk, M., Pranov, H., Taboryski, R. J. & Kofod, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
347 Downloads (Pure)

Green Fiber Bottle: the fully biodegradable packaging

Didone, M. & Tosello, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
245 Downloads (Pure)

Material Removal Mechanisms Analysis in the dry Electrical Discharge Machining and Possibilities for Micro-machining Applications

Puthumana, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
59 Downloads (Pure)