• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Conference abstract for conference
2020

Replication of micro-structured surfaces by integrating AM with PIM

Basso, A., Mendez Ribo, M., Christensen, S. E., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2020, (Accepted/In press). 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

2019

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
19 Downloads (Pure)

Comparison of Selective Laser Melting Post-Processes based on Amplitude and Functional Surface Roughness parameters

Loaldi, D., Kain, M., Haahr‐Lillevang, L., Vedel-Smith, N. K. & Tosello, G., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
14 Downloads (Pure)

Deformation Assisted Joining

Bay, N., Alves, L. M., Nielsen, C. V., Silva, C. M. A. & Martins, P. A. F., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
19 Downloads (Pure)

Evaluation of tribosystems for sheet metal forming

Moghadam, M., Üstünyagiz, E. & Nielsen, C. V., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
21 Downloads (Pure)

Injection Moulding optimization of nanostructured components using surface fingerprint

Loaldi, D., Zhang, Y., Calaon, M., Quagliotti, D. & Tosello, G., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Observation of Crack-Free Vickers Indents at 500 N in Annealed Caesium Aluminoborate Glass

Januchta, K., Stepniewska, M., Yue, Y., Jensen, L., Zhang, Y., Munch, S. S., Somers, M. A. J. & Smedskjær, M. M., 2019. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
43 Downloads (Pure)

Study of the Distribution of Rubber Particles in Ground Tire Rubber/Polypropylene Blends

Basso, A. & Zhang, Y., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

2018

Development of Highly Conductive Hybrid Composites

Islam, A. & Rad, S. D., 2018, p. 9-10.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
68 Downloads (Pure)

Direct manufacturing of μm structured surfaces by vat potopolymerization method

Davoudinejad, A., Pedersen, D. B. & Tosello, G., 2018. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
36 Downloads (Pure)

Multimaterial Micro Injection Molding

Islam, A., 2018. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
118 Downloads (Pure)

On the effect of machining strategy in micro milling of tool steel surface micro features with optical functionality

Li, D., Davoudinejad, A., Regi, F., Zhang, Y. & Tosello, G., 2018. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
36 Downloads (Pure)

Reproduction of multi-hierarchical structural surfaces by vat-photopolymerization

M. Ribo, M., Davoudinejad, A., Pedersen, D. B., Tosello, G. & Islam, A., 2018.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
44 Downloads (Pure)

The Augmented Cell Meat Production Project – the use of digital twins

Sonne, M. R., 2018. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
35 Downloads (Pure)

The Present and Future Perspectives of Moulded Interconnect Device (MID) Technologies

Islam, A., 2018. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
41 Downloads (Pure)

Use of a polymeric sacrificial release layer in photopolymer-based micro-3D printing

Vaut, L., Jensen, K. E., Tosello, G. & Boisen, A., 2018.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
73 Downloads (Pure)
2017

Characterization of smearing patterns in ball nose end milling process

Biondani, F., Bissacco, G. & Hansen, H. N., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
41 Downloads (Pure)

Effect of TWD estimation error on the depth of machined cavities in micro-EDM milling

Puthumana, G., Bissacco, G. & Hansen, H. N., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Electro sinter forging of titanium disks

Cannella, E., Nielsen, C. V. & Bay, N. O., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
69 Downloads (Pure)

Geometrically Optimized 3D Printed Mini-Devices for Oral Drug Delivery

Vaut, L., Jensen, K. E., Andersen, A. J., Tosello, G. & Boisen, A., 2017.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
131 Downloads (Pure)

Hierarchical Structure and Strengthening Mechanisms in Pearlitic Steel Wire

Zhang, X., Hansen, N., Huang, X. & Godfrey, A. W., 2017.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
105 Downloads (Pure)

Injection Moulding Simulation and Experimental Validation of Hearing Aid Shells

Islam, A. & Li, X., 2017. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
69 Downloads (Pure)

Investigation of Tooling for Anisotropic Optical Functional Surfaces

Li, D., Regi, F., Zhang, Y., Madsen, M. H., Nielsen, J. B. & Tosello, G., 2017. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
103 Downloads (Pure)

Measurement noise of a point autofocus surface topography instrument

Feng, X., Quagliotti, D., Maculotti, G., P. Syam, W., Tosello, G., Hansen, H. N., Galetto, M. & Leach, R., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
59 Downloads (Pure)

Micro injection moulding process optimization of an ultra-small POM three-dimensional component

Baruffi, F., Calaon, M. & Tosello, G., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
60 Downloads (Pure)

On the performance of micro injection moulding process simulations of TPE micro rings

Baruffi, F., Calaon, M. & Tosello, G., 2017. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
301 Downloads (Pure)

Stress and Strain Gradients in a Low Carbon Steel Deformed under Heavy Sliding

Zhang, X., Hansen, N. & Huang, X., 2017.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

The impact of tool wear on the functionality of replicated polymer surface with micro structures

Li, D., Zhang, Y., Regi, F., Tosello, G. & Nielsen, J. B., 2017. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
79 Downloads (Pure)
2016

Activity-based Sustainability Assessment of Highly Automated Manufacturing

Rödger, J-M., Bey, N. & Alting, L., 2016.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
120 Downloads (Pure)

A fully-coupled approach combining plastic deformation and liquid lubrication

Üstünyagiz, E., Christiansen, P., Nielsen, C. V., Bay, N. O. & Martins, P. A. F., 2016. 3 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

A simulation of the effect of TWD (tool wear per discharge) estimation error on the depth of machined surfaces in micro-EDM milling

Puthumana, G., Bissacco, G. & Hansen, H. N., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
161 Downloads (Pure)

Comparison of cutting edge characterization techniques applied to industrial tools with sub micrometer edge radius

Biondani, F., Bissacco, G., Garnæs, J. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
26 Downloads (Pure)

Determination of stamp deformation during imprinting on semi-spherical surfaces

Kafka, J., Matschuk, M., Pranov, H., Kofod, G., Taboryski, R. J., Sonne, M. R. & Lam, Y. C., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
90 Downloads (Pure)

Free-form nanostructured tools for plastic injection moulding

Kafka, J., Sonne, M. R., Lam, Y. C., Matschuk, M., Pranov, H., Taboryski, R. J. & Kofod, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
347 Downloads (Pure)

Green Fiber Bottle: the fully biodegradable packaging

Didone, M. & Tosello, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
245 Downloads (Pure)

Material Removal Mechanisms Analysis in the dry Electrical Discharge Machining and Possibilities for Micro-machining Applications

Puthumana, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
59 Downloads (Pure)

Metrology of sub-micron structured polymer surfaces

Quagliotti, D., Tosello, G., Salaga, J., Baruffi, F., Hansen, H. N. & Gasparin, S., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
119 Downloads (Pure)

Modelling the flexible stamp deformations during NIL on curved surfaces

Sonne, M. R. & Hattel, J. H., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Objectives comparison in a confocal microscope using pseuso-random roughness artefacts

Quagliotti, D., Tosello, G. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
25 Downloads (Pure)

Rheology of High-Melt-Strength Polypropylene for Additive Manufacturing

Hofstätter, T., Kamleitner, F., Jagenteufel, R., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
274 Downloads (Pure)

The effect of TWD estimation error on the geometry of machined surfaces in micro-EDM milling

Puthumana, G., Bissacco, G. & Hansen, H. N., 2016. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
210 Downloads (Pure)

Two process chains for creating functional surfaces on mold for 3D geometry

Zhang, Y., Hansen, H. N., Pedersen, D. B. & Tosello, G., 2016. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
101 Downloads (Pure)
2015

Effect of Functional Nano Channel Structures Different Widths on Injection Molding and Compression Molding Replication Capabilities

Calaon, M., Tosello, G., Garnaes, J. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
85 Downloads (Pure)

Electrochemical based processes enabling different replication steps for large area low cost surface nano structuring

Calaon, M., Hansen, H. N., Tosello, G., Garnaes, J., Tang, P. T. & Ravn, C., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
148 Downloads (Pure)

Gate design in injection molding of microfluidic components using process simulations

Marhöfer, D. M., Tosello, G., Islam, A. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
247 Downloads (Pure)

Micro injection moulding process validation for high precision manufacture of thermoplastic elastomer micro suspension rings

Calaon, M., Tosello, G., Elsborg Hansen, R. & Hansen, H. N., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
66 Downloads (Pure)

Optical characterization of roughness on polished steel surfaces

Feidenhans'l, N. A., Hansen, P-E., Pilny, L., Petersen, J. C. & Taboryski, R. J., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
90 Downloads (Pure)

Replication fidelity assessment of polymer large area sub-μm structured surfaces using fast angular intensity distribution measurements.

Calaon, M., Hansen, H. N., Tosello, G., Weirich, J., Garnæs, J. & Tang, P. T., 2015. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
51 Downloads (Pure)
2014

Fluid flow modelling in tape casting of ceramics: analytical and numerical approaches

Jabbari, M. & Hattel, J. H., 2014. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
52 Downloads (Pure)

Polymer Replication of a Randomly Nanostructured Insert with and without Induction Heating of the Mold

Menotti, S., Tang, P. T. & Hansen, H. N., 2014. 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

File
131 Downloads (Pure)