• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Conference abstract in proceedings
2019

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 71-74

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
20 Downloads (Pure)

A method for identification and quantification of thermal lensing in powder bed fusion

Andersen, S. A., Valente, E. H., Nadimpalli, V. K., Hansen, H. N. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 230-233

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
25 Downloads (Pure)

A study on the feasibility of in-process compensation of cutting force induced errors using axes motors absorbed current

Checchi, A., Dalla Costa, G., Haastrup Merrild, C., Bissacco, G. & Hansen, H. N., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 194-195

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
22 Downloads (Pure)

Build orientation effects on the roughness of SLM channels

Klingaa, C. G., Dahmen, T., Baier, S., Mohanty, S. & Hattel, J. H., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 111-114

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
34 Downloads (Pure)

Characterization techniques for evaluation of micro scale vat photopolymerization-based additive manufacturing

Danielak, A. H., Mendez Ribo, M., Üstünyagiz, E., Almdal, K., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 44-47

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Considerations for interpreting in-situ photodiode sensor data in pulsed mode laser powder bed fusion

Karthik Nadipalli, V., Andersen, S. A., Nielsen, J. S. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 66-69

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
22 Downloads (Pure)

Dimensional and Form Characterization of a Benchmarking Specimen Subjected to Different Post‐Processing Technologies for Metal Additive Manufacturing

Kain, M., Loaldi, D., Davoudinejad, A., Calaon, M., Vedel-Smith, N. K., Haahr‐Lillevang, L., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 104-5

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
60 Downloads (Pure)

Direct Fabrication of Microstructured Surfaces by Additive Manufacturing

Davoudinejad, A., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 118-119

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
37 Downloads (Pure)

Experimental analysis of the filament feeding force in material extrusion additive manufacturing

Serdeczny, M. P., Comminal, R., Pedersen, D. B. & Spangenberg, J., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 141-145

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
44 Downloads (Pure)

Geometrical shape assessment of additively manufactured features by Continuous Liquid Interface Production, vat photopolymerization method

Davoudinejad, A., Jessen, A. K., Farahani, S. D., Franke, N., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 116-117

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
22 Downloads (Pure)

Impact of post-processing stages on vat-photopolymerized specimens

M. Ribo, M., Danielak, A. H., Andersen, S. A., Üstünyagiz, E., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 155 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
17 Downloads (Pure)

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, E. H., Nadimpalli, V. K., Andersen, S. A., Pedersen, D. B., Christiansen, T. L. & Somers, M. A. J., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 244-247

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
49 Downloads (Pure)

Influence of the post-curing treatment on the mechanical properties in the vat photopolymerization technique

Üstünyagiz, E., Danielak, A. H., M. Ribo, M. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 132 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
19 Downloads (Pure)

Methodology for geometric characterization and dimensioning of additively manufactured channels

Dahmen, T., Klingaa, C. G., Baier, S., Pedersen, D. B. & Hattel, J. H., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 133-136

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
17 Downloads (Pure)

Micro product and process fingerprints for zero-defect net-shape micromanufacturing

Tosello, G., Gulcur, M., Whiteside, B., Coates, P., Luca, A., Vinícius, P., Lia, D. S., Riemer, O., Danilov, I., Zanjani, M. Y., Hackert-Oschätzchen, M., Schubert, A., Baruffi, F., Achour, S. B., Calaon, M., Nielsen, C. V., Bissacco, G., Cannella, E., Rasmussen, A., Bellotti, M. & 12 others, Saxena, K., Qian, J., Reynaerts, D., Syam, W., Leach, R., Kose, S. K., Parenti, P., Annoni, M., Cai, Y., Luo, X., Qin, Y. & Zeidler, H., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 98-99

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
25 Downloads (Pure)

Modelling of material deposition in big area additive manufacturing and 3D concrete printing

Comminal, R., Serdeczny, M. P., Ranjbar, N., Mehrali, M., Pedersen, D. B., Stang, H. & Spangenberg, J., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 151-154

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
60 Downloads (Pure)

Multi-material additive manufacturing of steels using laser powder bed fusion

Nadimpalli, V. K., Dahmen, T., Valente, E. H., Mohanty, S. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 240-243

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
102 Downloads (Pure)

Optimization of a self-peeling vat for precision vat photopolymerization setups

M. Ribo, M., Danielak, A. H., Islam, A. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 234-237

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
48 Downloads (Pure)

Quality Assurance of Reference Specimens Manufactured by Continuous Liquid Interface Production Using Coordinate Metrology

Kain, M., Davoudinejad, A., Quagliotti, D., Nielsen, J. S., Liltorp, K., Pedersen, D. B., Farahani, S. D., Franke, N. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 248-249

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
23 Downloads (Pure)

Simulation of thin features machining by micro end-milling using finite element modelling

Davoudinejad, A., Li, D., Zhang, Y. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 120-121

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
15 Downloads (Pure)

Strain gauge filament for extrusion based additive manufacturing

Madsen, F. G., Pedersen, D. B. & Daugaard, A. E., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 54 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
13 Downloads (Pure)

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, D., Quagliotti, D., Calaon, M., Czolkos, I., Johansson, A., Nielsen, T., Garnaes, J. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 336-337

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

6 Downloads (Pure)

Thermal characterization of a micro polishing machine and effect on path strategy compensation

Ben Achour, S., Checchi, A., Bissacco, G. & De Chiffre, L., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 446-447

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
32 Downloads (Pure)
2018

A 5D DoF Parallel Kinematic Controler For Big Area Additive Manufacturing

Jensen, M. L., K. Kiewning, M., Spangenberg, J., Andersen, S. B., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 167-171

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

A Beam Modulator and Galvanometer Controller for Metal Powder Bed Fusion

Andersen, S. A., Del Rio, S., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 172-177

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

1 Downloads (Pure)

A new design for an extensive benchmarking of additive manufacturing machines

Moshiri, M., Tosello, G. & Mohanty, S., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 261-262

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
46 Downloads (Pure)

Applicability of Acoustic Emission monitoring to micro polishing

Ben Achour, S., Bissacco, G. & De Chiffre, L., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 385-386

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
34 Downloads (Pure)

Application of modelling tools for precise transfer of nanostructures from silicon wafers to steel injection moulding tool inserts

Sonne, M. R. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 59-60

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
18 Downloads (Pure)

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A., Charalambis, A., Tosello, G., Zhang, Y., Calaon, M., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 383-384

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
27 Downloads (Pure)

Automated contact area measurement on structured surfaces

Kücükyildiz, Ö. C., Jensen, S. H. N. & De Chiffre, L., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 473-474

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
27 Downloads (Pure)

Characterisation of the Influence of the Colour in Resin for Micro Parts Production by Photopolymerisation Based Additive Manufacturing System

Danielak, A. H., M. Ribo, M., Pedersen, D. B. & Islam, A., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 64-69

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Computer vision for focus calibration of photo-polymerization systems

Ingwersen, C. K., Mortensen, H. L., Ribo, M. M., Danielak, A. H., Eiríksson, E. R., Nielsen, A. A. & Pedersen, D. B., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 89-91

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Considerations on numerical modelling for compensation of in-process metrology in manufacturing

Sonne, M. R., Mohammadi, A., Dalla Costa, G., Madruga, D. G., De Chiffre, L. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D. B., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 453-454

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
29 Downloads (Pure)

Effects of subsurface scattering on the accuracy of optical 3D measurements using miniature polymer step gauges

Wilm, J., Madruga, D. G., Jensen, J. N., Gregersen, S. K. S., Doest, M. E. B., Guerra, M. G., Aanæs, H. & De Chiffre, L., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 449-450

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

1 Downloads (Pure)

Evaluation of part consistency with photopolymer inserts in different injection moulding process parameters

Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Tosello, G. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D. B., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 253-254

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
10 Downloads (Pure)

Geometrical shape assessment of additively manufactured features by direct light processing vat polymerization method

Péreza, L. C. D., Davoudinejad, A., Quagliotti, D., Pedersen, D. B., Garcíaa, J. A. A., Yagüe-Fabraa, J. A. & Tosello, G., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 277-278

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
15 Downloads (Pure)

Geometric and Fature Size Design Effect on Vat Photopolymerization Micro Additively Manufactured Surface Deatures

Davoudinejad, A., Péreza, L. C. D., Quagliotti, D., Pedersen, D. B., Garcíaa, J. A. A., Yagüe-Fabra, J. A. & Tosello, G., 2018, Proceedings of the Joint Special Interest Group meeting: Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, p. 5

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Influence of thermal ageing on the mechanical properties of an additively manufactured photopolymer used in soft tooling applications

Mischkot, M., Krexner, G., Soprunyuk, V., Schranz, W., Pedersen, D. B. & Tosello, G., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 241-242

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
30 Downloads (Pure)

Intensity Mapping for Mask Projection based Photopolymerization

Warburg, F., Ribo, M. M., Luongo, A., Danielak, A. H. & Pedersen, D. B., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 92-96

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Measurements and simulations of the cross-section of the printed strands in fused filament fabrication

Serdeczny, M. P., Comminal, R., Pedersen, D. B. & Spangenberg, J., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 78-82

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Modelling of the microstructural evolution of Ti6Al4V parts produced by selective laser melting during heat treatment

De Baere, D., Valente, E. H., Mohanty, S. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 249-250

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
24 Downloads (Pure)

Numerical modelling and parametric study of grain morphology and resultant mechanical properties from selective laser melting process of Ti6Al4V

Bayat, M., Mohanty, S. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 273-274

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
68 Downloads (Pure)

Numerical simulation of extrusion-based additive manufacturing - Effect of the nozzle geometry on the strand cross-section

Comminal, R., Serdeczny, M. P., Pedersen, D. B. & Spangenberg, J., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 285-286

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
54 Downloads (Pure)

Numerical Study of the Impact of Shear Thinning Behaviour on the Strand Deposition Flow in the Extrusion-Based Additive Manufacturing

Serdeczny, M. P., Comminal, R., Pedersen, D. B. & Spangenberg, J., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 283-284

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
50 Downloads (Pure)

Pitch measurements validation of a structural coloured steel insert using Scanning Confocal Microscopy (SCM) and Atomic Force Microscopy (AFM)

Loaldi, D., Zhang, Y., Calaon, M., Yang, Y., Guochin, P., Garnæs, J. & Tosello, G., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 497-498

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
23 Downloads (Pure)

Post moulding thermal characterization of polymer components

D. Costa, G., González-Madruga, D. & De Chiffre, L., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 469-470

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
12 Downloads (Pure)

Precision Additive Metal Manufacturing

Witvrouw, A., Metelkova, J., Ranjan, R., Bayat, M., De Baere, D., Moshiri, M., Tosello, G., Solheid, J., Charles, A., Scholz, S., Baier, M., Carmignato, S., Stavroulakis, P., Shaheen, A. & Thijs, L., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 18-23

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Prediction of micro-sized flash using micro-injection moulding process simulations

Baruffi, F., Calaon, M. & Tosello, G., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 263-264

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
8 Downloads (Pure)

Process parameter influence on Electro-sinter-forging (ESF) of titanium discs

Cannella, E., Nielsen, C. V. & Bay, N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 315-316

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
24 Downloads (Pure)

Recent Developments in Fiber-Reinforced Additive Manufacturing of Injection Molding Inserts

Hofstätter, T., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 110-115

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
21 Downloads (Pure)