• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output 1977 2020

Filter
Article in proceedings
2019
75 Downloads (Pure)

A Characterization Study Relating Cross-Sectional Distribution of Fiber Volume Fraction and Permeability

Rasmussen, F. S., Sonne, M. R., Larsen, M., Mikkelsen, L. P. & Hattel, J. H., 2019, Proceedings of 22nd International Conference on Composite Materials. 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
9 Downloads (Pure)

Combined effects of source hardening and activation of new slip systems on simultaneous enhancement of strength and ductility in fine-grained Mg-3Gd alloy

Luo, X., Wu, G., Feng, Z., Luo, J., Yu, T., Huang, T., Hansen, N. & Huang, X., 2019, Proceedings of the 40th Risø International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D. DTU Mechanical Engineering, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
87 Downloads (Pure)

Exhaust Valve Spindles for Marine Diesel Engines Manufactured by Hot Isostatic Pressing

Lapina, A., Hoeg, H. A., Knudsen, J., Berglund, T., Møller, R. & Hattel, J. H., 2019, Materials Research Proceedings. Dayal, P. & Triani, G. (eds.). Materials Research Forum LLC, Vol. 10. p. 98-106 (Materials Research Proceedings, Vol. 10).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
63 Downloads (Pure)

Fiber segmentation from 3D X-ray computed tomography of composites with continuous textured glass fibre yarns

Rasmussen, F. S., Emerson, M. J., Sonne, M. R., Hattel, J. H., Mikkelsen, L. P. & Dahl, V. A., 2019, Proceedings of 2019 International Conference on Tomography of Materials & Structures. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Injection Moulding Simulation and Validation of Thin Wall Components for Precision Applications

Islam, A., Li, X. & Wirska, M., 2019, Advances in Manufacturing II. Gapiński, B., Szostak, M. & Ivanov, V. (eds.). Springer, Vol. 4. p. 96-107

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Modelling the filling behavior of micro structured plastic optical components

Loaldi, D., Quagliotti, D., Calaon, M. & Tosello, G., 2019, (Accepted/In press) Proceedings of WCMNM 2018. 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Resistor-capacitor approach for modelling of temperature and humidity response inside electronic enclosures

Staliulionis, Z., Mohanty, S. & Hattel, J. H., 2019, 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2019). IEEE, 7 p. 8724538. (2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2019).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

86 Downloads (Pure)

Roughness Investigation of SLM Manufactured Conformal Cooling Channels Using X-ray Computed Tomography

Klingaa, C. G., Bjerre, M. K., Baier, S., De Chiffre, L., Mohanty, S. & Hattel, J. H., 2019, Proceedings of the 9th Conference on Industrial Computed Tomography, Padova, Italy (iCT 2019). 10 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
2018

2D and 3D characterization of rolling contact fatigue cracks in a manganese steel crossing wing rail

Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C. J. & Juul Jensen, D., 2018, 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2018 . TU Delft, p. 196-202

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

117 Downloads (Pure)

Damping Behavior of Carbon Nanotube Reinforced Nanocomposites: Micromechanical Modeling and Experiments

Doagou-Rad, S., Jensen, J. S. & Islam, A., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

12 Downloads (Pure)

Defects investigation in additively manufactured steel products for injection moulding

Moshiri, M., Tosello, G. & Mohanty, S., 2018, Euro PM2018 Proceedings . European Powder Metallurgy Association, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Geometric form of gating system elements and its influence on the initial filling phase

Dojka, R., Jezierski, J. & Tiedje, N. S., 2018, 73rd World Foundry Congress (WFC 2018) Creative Foundry: Proceedings of a meeting held 23-27 September 2018, Krakow, Poland. Young Researchers' Seminar . World Foundry Organization, p. 345-346

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

146 Downloads (Pure)

Meso-Scale Process Modelling Strategies for Pultrusion of Unidirectional Profiles

Yuksel, O., Baran, I., Rasmussen, F. S., Spangenberg, J., Ersoy, N., Hattel, J. H. & Akkerman, R., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

120 Downloads (Pure)

Modelling the Effect of Non-Uniform Fibre Distribution on the Curing Behaviour in Resin Injection Pultrusion

Rasmussen, F. S., Klingaa, C. G., Larsen, M., Sonne, M. R., Spangenberg, J. & Hattel, J. H., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

436 Downloads (Pure)

Numerical Modeling of the Material Deposition and Contouring Precision in Fused Deposition Modeling

Comminal, R., Serdeczny, M. P., Pedersen, D. B. & Spangenberg, J., 2018, Proceedings of the Annual International Solid Freeform Fabrication Symposium. Laboratory for Freeform Fabrication, p. 1855-1864

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
81 Downloads (Pure)

Numerical modelling and optimisation of fibre wet-out in resin-injection pultrusion processes

Sandberg, M., Hattel, J. H. & Spangenberg, J., 2018, 18th European Conference on Composite Materials (ECCM-18) . Applied Mechanics Laboratory, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

102 Downloads (Pure)

Numerical prediction of the porosity of parts fabricated with fused deposition modeling

Serdeczny, M. P., Comminal, R., Pedersen, D. B. & Spangenberg, J., 2018, Proceedings of the Annual International Solid Freeform Fabrication Symposium. Laboratory for Freeform Fabrication, p. 1849-1854

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
138 Downloads (Pure)

On the applicability of micro-injection moulding simulations to multivariate integrated process/product optimization

Baruffi, F., Calaon, M., Tosello, G. & Elsborg, R., 2018, Proceedings of WCMNM 2018. Valentinčič, J., Byung-Guk Jun, M., Dohda, K. & Dimov, S. (eds.). 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Particle-Matrix Proportioning of High Strength Lightweight Aggregate Concrete

Skare, E. L., Zivkovic, J., Jacobsen, S. & Øverli, J. A., 2018, SynerCrete'18 - Interdisciplinary Approaches for Cement-based Materials and Structural Concrete: Synergizing Expertise and Bridging Scales of Space and Time. Vol. 1 & 2. Azenha, M., Schlicke, D., Benboudjema, F. & Jedrzejewska, A. (eds.). Paris: Rilem publications, p. 279-285

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

6 Downloads (Pure)

Use of high intensity X-ray analysis as tool to create new, fundamental models for phase transformations and residual stress in ductile cast iron

Tiedje, N. S., Bjerre, M. K., Andriollo, T., Azeem, M., Zhang, Y., Fæster, S., Lee, P. D. & Hattel, J. H., 2018, 73rd World Foundry Congress (WFC 2018) Creative Foundry: Proceedings of a meeting held 23-27 September 2018, Krakow, Poland. Young Researchers' Seminar . World Foundry Organization, p. 239-240

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2017
1 Downloads (Pure)

3D Finite Element Modelling of Drilling Process of Al2024-T3 Alloy with solid tooling and Experimental Validation

Davoudinejad, A. & Tosello, G., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A numerical investigation of the effect of ambient conditions on natural convection cooling of electronics

Shojaee Nasirabadi, P. & Hattel, J. H., 2017, 23rd International Workshop on Thermal Investigations of ICs and Systems (THERMINIC 2017). IEEE, p. 1-4

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A perfomance assesment of a 2 axis scanning mirror galvanometer for powder bed fusion

Pedersen, D. B., Andersen, S. A., Nielsen, J. S., Eiríksson, E. R., Nielsen, J. B., Wilm, J., Aanæs, H. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1051 Downloads (Pure)

Augmented Reality Interfaces for Additive Manufacturing

Eiríksson, E. R., Pedersen, D. B., Frisvad, J. R., Skovmand, L., Heun, V., Maes, P. & Aanæs, H., 2017, Scandinavian Conference on Image Analysis. Springer, p. 515-525 (Lecture Notes in Computer Science, Vol. 10269).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
1 Downloads (Pure)

Biological features produced by additive manufacturing processes using vat photopolymerization method

Davoudinejad, A., Mendez Ribo, M., Pedersen, D. B., Tosello, G. & Islam, A., 2017, Proceedings of the euspen Special Interest Group Meeting: Micro/Nano Manufacturing. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

334 Downloads (Pure)

Challenges and opportunities of fibre-reinforced polymers in additive manufacturing with focus on industrial applications

Hofstätter, T., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
209 Downloads (Pure)

Characterizing Green Fiber Bottle Prototypes Using Computed Tomography

Saxena, P., Bissacco, G., Stolfi, A. & De Chiffre, L., 2017, Proceedings of the 7th Conference on Industrial Computed Tomography (iCT 2017). 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
259 Downloads (Pure)

Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing

Charalambis, A., Davoudinejad, A., Tosello, G. & Pedersen, D. B., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
171 Downloads (Pure)

Creating a Multi-material Probing Error Test for the Acceptance Testing of Dimensional Computed Tomography Systems

Borges de Oliveira, F., Stolfi, A., Bartscher, M. & Neugebauer, M., 2017, Proceedings of the 7th Conference on Industrial Computed Tomography (iCT 2017). 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
1 Downloads (Pure)

Economic trade-offs of additive manufacturing integration in injection moulding process chain

Charalambis, A., Kerbache, L., Tosello, G., Pedersen, D. B., Mischkot, M. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

87 Downloads (Pure)

Effects of carbon fibres on the life cycle assessment of additively manufactured injection moulding inserts for rapid prototyping

Hofstätter, T., Bey, N., Mischkot, M., Stotz, P. M., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Evaluation of optical functional surfaces on the injection moulding insert by micro milling process

Li, D., Davoudinejad, A., Zhang, Y., Regi, F., Tosello, G., Nielsen, J. B., Aanæs, H. & Frisvad, J. R., 2017, Proceedings of the euspen Special Interest Group Meeting: Micro/Nano Manufacturing. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Evaluation of polymer micro parts produced by additive manufacturing processes using vat photopolymerization method

Davoudinejad, A., Pedersen, D. B. & Tosello, G., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

Finite  Element  Modeling  and  Process  Performance  of  Micro  End‐Milling  of Aluminum 6082‐T6

Davoudinejad, A., Tosello, G. & Annoni, M., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Injection Moulding Pilot Production: Performance Assessment of Tooling Process Chains Based on Tool Inserts Made from Brass and A 3d Printed Photopolymer

Mischkot, M., Tosello, G., Nielsen, D. K. Y., Pedersen, D. B., Zhang, Y., Hofstätter, T., Herbin, L. & Hansen, H. N., 2017, Proceedings of ANTEC 2017. Society of Plastics Engineers, 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

1 Downloads (Pure)

In-line 3D print failure detection using computer vision

Lyngby, R. A., Wilm, J., Eiríksson, E. R., Nielsen, J. B., Jensen, J. N., Aanæs, H. & Pedersen, D. B., 2017, Dimensional Accuracy and Surface Finish in Additive Manufacturing. 4 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Inner centering in parting line area of injection mould using side locks

Mahshid, R. & Hansen, H. N., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

2 Downloads (Pure)

Integrated Computational Modelling of Thermochemical Surface Engineering of Stainless Steel

Kücükyildiz, Ö. C., Sonne, M. R., Thorborg, J., Hattel, J. H. & Somers, M. A. J., 2017, Proceedings of the 24th IFHTSE Congress . 9 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

238 Downloads (Pure)

Integration of Fiber-Reinforced Polymers in a Life Cycle Assessment of Injection Molding Process Chains with Additive Manufacturing

Hofstätter, T., Bey, N., Mischkot, M., Stotz, P. M., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017, Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017. Meboldt, M. & Klahn, C. (eds.). Springer, p. 287-295

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Large scale additive manufacturing of thermosetting material

Jensen, M. L., Pedersen, D. B., Tosello, G. & Hansen, H. N., 2017, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE: Dimensional Accuracy and Surface Finish in Additive Manufacturing. The European Society for Precision Engineering and Nanotechnology, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

432 Downloads (Pure)

Laser additive manufacturing of multimaterial tool inserts: a simulation-based optimization study

Mohanty, S. & Hattel, J. H., 2017, Proceedings of Laser 3D Manufacturing IV. Gu, B., Helvajian, H., Piqué, A., Dunsky, C. M. & Liu, J. (eds.). SPIE - International Society for Optical Engineering, Vol. 10095. 10 p. 100950G. (Proceedings of S P I E - International Society for Optical Engineering).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
181 Downloads (Pure)

Modeling the Anisotropic Reflectance of a Surface with Microstructure Engineered to Obtain Visible Contrast after Rotation

Luongo, A., Falster, V., Doest, M. E. B., Li, D., Regi, F., Zhang, Y., Tosello, G., Nielsen, J. B., Aanæs, H. & Frisvad, J. R., 2017, Proceedings of the ICCV 2017 International Conference on Computer Vision. IEEE, p. 159-165 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Monitoring of the thermal deformations on polymer parts using a vision system

Dalla Costa, G., Madruga, D. G. & De Chiffre, L., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Multi-objective optimization of cellular scanning strategy in selective laser melting

Ahrari, A., Deb, K., Mohanty, S. & Hattel, J. H., 2017, Proceedings of the 2017 IEEE Congress on Evolutionary Computation. IEEE, p. 2730-2737 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Multi-Scale Modeling of the Structural and Vibrational Behavior of Carbon Nanotube Reinforced Polymeric Nanocomposite Plates

Doagou Rad, S., Jensen, J. S. & Islam, A., 2017, Proceedings of the sixth ECCOMAS Thematic Conference on the Mechanical Response of Composites. Remmers, J. J. C. & Turon, A. (eds.). Eindhoven University of Technology, p. 94-106

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

139 Downloads (Pure)

Performance Simulation and Verification of Vat Photopolymerization Based, Additively Manufactured Injection Molding Inserts with Micro-Features

Mischkot, M., Hofstätter, T., Michailidou, I., Herrán Chavarri, C., Lunzer, A., Tosello, G., Pedersen, D. B. & Hansen, H. N., 2017, Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017. Meboldt, M. & Klahn, C. (eds.). Springer, p. 162-168

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File

Photogrammetry for Repositioning in Additive Manufacturing

Jensen, J. N., Lyngby, R. A., Aanæs, H., Eiríksson, E. R., Nielsen, J. B., Wilm, J. & Pedersen, D. B., 2017, Joint Special Interest Group meeting between euspen and ASPE . 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

PicPrint: Embedding pictures in additive manufacturing

Nielsen, J. B., Eiríksson, E. R., Lyngby, R. A., Wilm, J., Jensen, J. N., Aanæs, H. & Pedersen, D. B., 2017, Joint Special Interest Group meeting between euspen and ASPE . The European Society for Precision Engineering and Nanotechnology, 3 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

175 Downloads (Pure)

Pre-treatment of Biomass By Rolling - A Combined Experimental and Numerical Analysis

Hansen, K. S., Ravn, C., Nielsen, E. K., Koch, T., Porte, C., Christiansen, P., Rasmussen, A. A. & Bay, N. O., 2017, Proceedings of 25th European Biomass Conference and Exhibition. p. 492 - 499

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
3 Downloads (Pure)

Process chain for fabrication of anisotropic optical functional surfaces on polymer components

Li, D., Zhang, Y., Regi, F., Tosello, G., Madsen, M. H., Nielsen, J. B., Aanæs, H. & Frisvad, J. R., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, p. 305-306

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review