• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output 1977 2020

Filter
Book chapter
2020

Deformation Microstructure and Recovery

Yu, T., 2020, Recrystallization: Types, Techniques and Applications. Huang, K. (ed.). Nova Science Publishers, p. 1-44

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

2019

Friction Compensation in the Compression Test

Christiansen, P., Martins, P. A. F. & Bay, N., 2019, Manufacturing Engineering Education. Davim, J. P. (ed.). Elsevier, p. 85-104 20 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Functional, Technical and Economical Requirements Integration for Additive Manufacturing Design Education

Bernard, A., Thompson, M. K., Moroni, G., Vaneker, T., Pei, E. & Barlier, C., 2019, Additive Manufacturing—Developments in Training and Education. Pei, E., Monzón, M. & Bernard, A. (eds.). Springer, p. 171-185

Research output: Chapter in Book/Report/Conference proceedingBook chapterEducationpeer-review

2018

Additive Manufacturing for Micro Tooling and Micro Part Rapid Prototyping

Davoudinejad, A., Pedersen, D. B. & Tosello, G., 2018, Micro Injection Molding. Tosello, G. (ed.). Munich: Carl Hanser Verlag, p. 289-313

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Coin Minting

Alexandrino, P., Leitão, P. J., Alves, L. M., Nielsen, C. V. & Martins, P. A. F., 2018, Introduction to Mechanical Engineering. Davim, J. P. (ed.). Springer, p. 83-111

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Error sources

Stolfi, A., De Chiffre, L. & Kasperl, S., 2018, Industrial X-Ray Computed Tomography. Carmignato, S., Dewulf, W. & Leach, R. (eds.). Springer, p. 143-184

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Metrological Quality Assurance in Micro Injection Molding

Quagliotti, D., Calaon, M. & Tosello, G., 2018, Micro Injection Molding. Tosello, G. (ed.). Munich: Carl Hanser Verlag, p. 241-288

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Micro Injection Molding Machines Technology

Fantoni, G., Gabelloni, D., Tosello, G. & Hansen, H. N., 2018, Micro Injection Molding. Tosello, G. (ed.). Munich: Carl Hanser Verlag, p. 1-30

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Micro Machining Technologies for Micro Injection Mold Making

Bissacco, G., 2018, Micro Injection Molding. Tosello, G. (ed.). Munich: Carl Hanser Verlag, p. 113-139

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Modeling and Simulation of Micro Injection Molding

Tosello, G. & Marhöfer, D. M., 2018, Micro Injection Molding. Tosello, G. (ed.). Munich: Carl Hanser Verlag, p. 213-240

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Multimaterial Micro Injection Molding

Islam, A., 2018, Micro Injection Molding. Tosello, G. (ed.). Munich: Carl Hanser Verlag, p. 339-377

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Qualification and testing of CT systems

Bartscher, M., Neuschaefer-Rube, U., Illemann, J., Borges de Oliveira, F., Stolfi, A. & Carmignato, S., 2018, Industrial X-Ray Computed Tomography. Carmignato, S., Dewulf, W. & Leach, R. (eds.). Springer, p. 185-228

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Surface Replication in Micro Injection Molding

Calaon, M., Quagliotti, D. & Tosello, G., 2018, Micro Injection Molding. Tosello, G. (ed.). Munich: Carl Hanser Verlag, p. 83-112

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

2017

Internal Casting Stresses and Dimensional Stability

Andriollo, T., Vedel-Smith, N. K., Thorborg, J. & Hattel, J. H., 2017, ASM Handbook: Cast Iron Science and Technology. Stefanescu, D. M. (ed.). ASM International, Vol. 1A. p. 600-605

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Parallel direct solver for finite element modeling of manufacturing processes

Nielsen, C. V. & Martins, P. A. F., 2017, Computational Methods and Production Engineering: Research and Development. Davim, J. P. (ed.). Elsevier, p. 1-30 (Woodhead Publishing Reviews: Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

2016

Robotic Hot-Blade Cutting: An Industrial Approach to Cost-Effective Production of Double Curved Concrete Structures

Søndergaard, A., Feringa, J., Nørbjerg, T. B., Steenstrup, K. H., Brander, D., Gravesen, J., Markvorsen, S., Bærentzen, J. A., Petkov, K., Hattel, J. H., Clausen, K., Jensen, K., Knudsen, L. & Kortbek, J., 2016, Robotic Fabrication in Architecture, Art and Design 2016. Reinhardt, D., Saunders, R. & Burry, J. (eds.). Springer, p. 150-164

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

2015

Contact mechanics, friction and adhesion with application to quasicrystals

Persson, B., Carbone, G., Samoilov, V. N., Sivebæk, I. M., Tartaglino, U., Volokitin, A. I. & Yang, C., 2015, Contact Mechanics, Friction and Adhesion with Application to Quasicrystals. Springer, Vol. 31. p. 249-287 39 p. (NanoScience and Technology).

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

159 Downloads (Pure)

Metrological investigation of nanostructured polymer surfaces replication using atomic force microscopy: Uncertainty evaluation in the surface replication fidelity assessment of moulded specimens at the 100 nm scale

Quagliotti, D., Tosello, G. & Hansen, H. N., 2015, VDI Berichte. VDI-Verlag, Vol. 2269. p. 49-55 (V D I - Berichte, Vol. 2269).

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Open Access
File
2014
159 Downloads (Pure)

Report for the 2014 DCEE Working Group Meeting

Jensen, L. B. & Thompson, M. K., 2014, Proceedings of the 3rd International Workshop on Design in Civil and Environmental Engineering. Bjerregaard Jensen, L. & Thompson, M. K. (eds.). Technical University of Denmark, p. 186-188

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Open Access
File
2013
144 Downloads (Pure)

Report for Working Group 1: Design Research in Civil and Environmental Engineering

Thompson, M. K. & Paradisi, I., 2013, Proceedings of the 2nd International Workshop on Design in Civil and Environmental Engineering. Thompson, M. K. (ed.). DCEE, p. 145-147

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearch

Open Access
File
253 Downloads (Pure)

Report for Working Group 2: Design Education in Civil and Environmental Engineering

Bjerregaard Jensen, L. & Thompson, M. K., 2013, Proceedings of the 2nd International Workshop on Design in Civil and Environmental Engineering. Thompson, M. K. (ed.). DCEE, p. 148-149

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearch

Open Access
File
2011

Cold Welding

Bay, N., 2011, ASM Handbook. Lienert, T., Siewert, T., Babu, S. & Acoff, V. (eds.). ASM International, Vol. 6A, Welding Fundamentals and Processes. p. 711-716 897 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Single-Point Incremental Forming

Siva, M. B., Bay, N. & Martins, A. F., 2011, Sustainable Manufacturing. Davim, J. P. (ed.). John Wiley & Sons Ltd, p. 173-209 246 p. (CAM Control Systems, Robotics and Manufacturing Series).

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

State-of-the-Art Multi-Objective Optimisation of Manufacturing Processes Based on Thermo-Mechanical Simulations

Tutum, C. C. & Hattel, J. H., 2011, Multi-objective Evolutionary Optimisation for Product Design and Manufacturing. Wang, L., Ng, A. H. C. & Deb, K. (eds.). Springer, Vol. 1. p. 71-133 493 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

2010

Micro-Bulk Forming

Arentoft, M., Eriksen, R. S. & Hansen, H. N., 2010, Micromanufacturing Engineering and Technology. Qin, Y. (ed.). Oxford: Elsevier, p. 114-129 432 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Micro Injection Moulding

Tosello, G. & Hansen, H. N., 2010, Micro-Manufacturing Engineering and Technology. Qin, Y. (ed.). Elsevier, p. 90-113 432 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Micro Mechanical Assembly

Hansen, H. N., Arentoft, M., Tosello, G. & Gegeckaite, A., 2010, Micromanufacturing Engineering and Technology. Qin, Y. (ed.). Elsevier, p. 174-184 432 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Sustainability of Micro-Manufacturing Technologies

De Grave, A., Olsen, S. I., Hansen, H. N. & Arentoft, M., 2010, Micromanufacturing Engineering and Technology. Qin, Y. (ed.). Elsevier, p. 394-404 432 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

2009

Tooling Process Chains and Concepts

Hansen, H. N., Arentoft, M., Tang, P. T., Bissacco, G. & Tosello, G., 2009, Micromanufacturing Engineering and Technology. Qin, Y. (ed.). London: WilliamAndrew Publishing, p. 287-297

Research output: Chapter in Book/Report/Conference proceedingBook chapterEducationpeer-review

2006

Surface and Interface Characterisation: Surface Topography Analysis

De Chiffre, L., 2006, Springer Handbook of Materials Measurement Methods. Springer, p. 255-280

Research output: Chapter in Book/Report/Conference proceedingBook chapterEducationpeer-review