• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output 1977 2020

Filter
Ph.D. thesis
2019
516 Downloads (Pure)

Additive Manufacturing of Fiber-Reinforced Polymers

Hofstätter, T., 2019, Kgs. Lyngby: Technical University of Denmark. 259 p.

Research output: Book/ReportPh.D. thesis

Open Access
File
21 Downloads (Pure)

High precision tooling for electrical sintering of titanium and permanent magnets

Cannella, E., 2019, Kgs. Lyngby: Technical University of Denmark. 196 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
94 Downloads (Pure)

Integrated micro product/process quality assurance in micro injection moulding production

Baruffi, F., 2019, Kgs. Lyngby: Technical University of Denmark. 205 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
160 Downloads (Pure)

Limits of lubrication in severe stamping operations

Moghadam, M., 2019, Kgs. Lyngby: Technical University of Denmark. 145 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
119 Downloads (Pure)

Molded Pulp Products Manufacturing: Process Development, Characterization and Modeling

Didone, M., 2019, Kgs. Lyngby: Technical University of Denmark. 152 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2018
729 Downloads (Pure)

Advanced Process Chains for Prototyping and Pilot Production based on Direct Rapid Soft Tooling

Mischkot, M., 2018, Kgs. Lyngby: Technical University of Denmark. 234 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
93 Downloads (Pure)

An Off-line Methodology to Determine Limits of Lubrication in Sheet Metal Forming

Üstünyagiz, E., 2018, Kgs. Lyngby: Technical University of Denmark. 215 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2017
76 Downloads (Pure)

Accurate dimensional measurements in production environment using Dynamic Length Metrology

Dalla Costa, G., 2017, Kgs. Lyngby: Technical University of Denmark. 224 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
194 Downloads (Pure)

Development and Testing of Tailored Tool Surfaces for Sheet Metal Forming

Sulaiman, M. H. B., 2017, Kgs. Lyngby: Technical University of Denmark. 165 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
676 Downloads (Pure)
Open Access
File
237 Downloads (Pure)

In situ observations of graphite formation during solidification of cast iron

Bjerre, M. K., 2017, Kgs. Lyngby: Technical University of Denmark. 133 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
505 Downloads (Pure)

Integrated Quality Control of Precision Assemblies using Computed Tomography

Stolfi, A., 2017, Kgs. Lyngby: Danmarks Tekniske Universitet (DTU). 198 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
103 Downloads (Pure)

Modeling for Dynamic Length Metrology in Accurate Manufacture

Mohammadi, A., 2017, Kgs. Lyngby: Technical University of Denmark. 166 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
278 Downloads (Pure)
Open Access
File
77 Downloads (Pure)

Numerical Modelling of Local Climate Inside Electronics Enclosures

Shojaee Nasirabadi, P., 2017, Kgs. Lyngby: Technical University of Denmark. 192 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
503 Downloads (Pure)

Process chains for Advanced Tooling based on Additive Manufacturing

Biondani, F. G., 2017, Kgs. Lyngby: Technical University of Denmark. 219 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2016
370 Downloads (Pure)

Design and Manufacture of Molded Micro Products Using Concurrent Engineering

Marhöfer, D. M., 2016, Kgs. Lyngby: Technical University of Denmark. 345 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
143 Downloads (Pure)

Micro Injection Moulding for Micro Fuel Cell Production

Wöhner, T., 2016, Kgs. Lyngby: Technical University of Denmark. 142 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2015
1028 Downloads (Pure)

Drying of water based foundry coatings: Innovative test, process design and optimization methods

Di Muoio, G. L., 2015, DTU Mechanical Engineering. 320 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
270 Downloads (Pure)

Modelling architectures in multi-product oriented technology development

Guðlaugsson, T. V., 2015, Kgs. Lyngby: Technical University of Denmark. 240 p. (DCAMM Special Report; No. S192).

Research output: Book/ReportPh.D. thesis

Open Access
File
423 Downloads (Pure)
Open Access
File
202 Downloads (Pure)

Modelling of defects in ingot forging: with the finite element flow formulation

Christiansen, P., 2014, Kgs. Lyngby: Technical University of Denmark. 269 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File

Modelling the deformation process of flexible stamps for nanoimprint lithography

Sonne, M. R., 2014, Kgs. Lyngby: Technical University of Denmark. 267 p.

Research output: Book/ReportPh.D. thesisResearch

Process chain validation in micro and nano replication

Calaon, M., 2014, Kgs. Lyngby: Technical University of Denmark. 210 p.

Research output: Book/ReportPh.D. thesisResearch

951 Downloads (Pure)

Quality assurance of CT scanning for industrial applications

Angel, J. A. B., 2014, DTU Mechanical Engineering. 181 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2013
1389 Downloads (Pure)

3D Modeling and Testing of Contact Problems in Resistance Welding

Nielsen, C. V. & Zhang, W., 2013, Kgs. Lyngby: Technical University of Denmark. 236 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
5690 Downloads (Pure)

Additive Manufacturing: Multi Material Processing and Part Quality Control

Pedersen, D. B., 2013, Kgs. Lyngby: Technical University of Denmark. 246 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
1248 Downloads (Pure)

Characterisation and Testing of Multifunctional Surfaces

Godi, A., 2013, Kgs. Lyngby: Technical University of Denmark. 290 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
3112 Downloads (Pure)

Coordinate Metrology by Traceable Computed Tomography

Müller, P., 2013, Kgs. Lyngby: Technical University of Denmark. 181 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2734 Downloads (Pure)
Open Access
File
7812 Downloads (Pure)

Solidification of cast iron - A study on the effect of microalloy elements on cast iron

Moumeni, E., 2013, Kgs. Lyngby: Technical University of Denmark. 153 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2012
1228 Downloads (Pure)

Verification of Tolerance Chains in Micro Manufacturing

Gasparin, S., 2012, Kgs. Lyngby: DTU Mechanical Engineering. 290 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2011
4932 Downloads (Pure)

Integrated Modeling of Process, Structures and Performance in Cast Parts

Kotas, P., Jun 2011, Kgs. Lyngby, Denmark: Technical University of Denmark. 252 p.

Research output: Book/ReportPh.D. thesisResearch

File
4134 Downloads (Pure)

New Sol-Gel Coatings to Improve Casting Quality

Nwaogu, U. C., 2011, Kgs. Lyngby: DTU Mechanical Engineering. 343 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2010
5234 Downloads (Pure)

3D-SEM Metrology for Coordinate Measurements at the Nanometer Scale

Carli, L., 2010, DTU Mechanical Engineering. 266 p.

Research output: Book/ReportPh.D. thesisResearch

File
1580 Downloads (Pure)

Development of lead-free solders for high-temperature applications

Chidambaram, V., Sep 2010, Kgs. Lyngby, Denmark: Technical University of Denmark. 92 p.

Research output: Book/ReportPh.D. thesisResearch

File
1705 Downloads (Pure)
Open Access
File
3082 Downloads (Pure)

Optimization of Thermo-mechanical Conditions in Friction Stir Welding

Tutum, C. C., Jan 2010, Kgs. Lyngby, Denmark: Technical University of Denmark. 193 p.

Research output: Book/ReportPh.D. thesisResearch

File
1711 Downloads (Pure)

Resistance Welding of Advanced Materials and Micro Components

Friis, K. S., 2010, Kgs.Lyngby: DTU Mechanical Engineering. 281 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
2008
687 Downloads (Pure)
Open Access
File
3199 Downloads (Pure)

Rapid Prototyping by Single Point Incremental Forming of Sheet Metal

Skjødt, M., Dec 2008, 184 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File
1869 Downloads (Pure)

Two component micro injection moulding for moulded interconnect devices

Islam, A., Jul 2008, 266 p.

Research output: Book/ReportPh.D. thesisResearch

Open Access
File