• Produktionstorvet, 427A, 321

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

2020

3D Printing of Reservoir Devices for Oral Drug Delivery: From Concept to Functionality through Design Improvement for Enhanced Mucoadhesion

Vaut, L., Juszczyk, J. J., Kamguyan, K., Jensen, K. E., Tosello, G. & Boisen, A., 2020, (Accepted/In press) In : A C S Biomaterials Science & Engineering.

Research output: Contribution to journalJournal articleResearchpeer-review

Advances in Ultrasonic Welding of Thermoplastic Composites: A Review

Bhudolia, S. K., Gohel, G., Leong, K. F. & Islam, A., 2020, In : Materials. 13, 6, 28 p., 1284.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Analysis of lubricant performance in punching and blanking

Moghadam, M., Villa, M., Moreau, P., Dubois, A., Dubar, L., Nielsen, C. V. & Bay, N., 2020, In : Tribology International. 141, 8 p., 105949.

Research output: Contribution to journalJournal articleResearchpeer-review

2 Downloads (Pure)

Analysis of the correlation between micro-mechanical fields and fatigue crack propagation path in nodular cast iron

Andriollo, T., Zhang, Y., Fæster, S. & Kouznetsova, V., 2020, In : Acta Materialia. 188, p. 302-314

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

An application-oriented roadmap to select polymeric nanocomposites for advanced applications: A review

Doagou-Rad, S., Islam, A. & Merca, T. D., 2020, (Accepted/In press) In : Polymer Composites.

Research output: Contribution to journalJournal articleResearchpeer-review

An approach to the modeling study and analysis of tool electrode wear mechanisms in micro electrical discharge milling

Puthumana, G., 2020, (Submitted) In : Journal of Advanced Mechanical Engineering. 11 p.

Research output: Contribution to journalJournal articleResearchpeer-review

An innovative and eco-friendly modality for synthesis of highly fluorinated graphene by an acidic ionic liquid: Making of an efficacious vehicle for anti-cancer drug delivery

Jahanshahi, M., Kowsari, E., Haddadi-Asl, V., Khoobi, M., Bazri, B., Aryafard, M., Lee, J. H., Kadumudi, F. B., Talebian, S., Kamaly, N., Mehrali, M. & Dolatshahi-Pirouz, A., 2020, In : Applied Surface Science. 515, 11 p., 146071.

Research output: Contribution to journalJournal articleResearchpeer-review

A Novel Integrated Approach for Analysis and Evaluation of Control Factor Effects on Volumetric Tool Wear Rate (Vtwr) in Micro-EDM

Puthumana, G., 2020, (Submitted) In : Facta Universitatis. Series Mechanical Engineering. 17 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel

Cao, Z., Liu, T., Yu, F., Cao, W., Zhang, X. & Weng, Y., 2020, In : International Journal of Fatigue. 131, 6 p., 105351.

Research output: Contribution to journalJournal articleResearchpeer-review

Current trends in micro electrical discharge machining (µEDM) for practical applications

Puthumana, G., 2020, (Submitted) In : International Journal of Automotive and Mechanical Engineering. 29 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Damage evolution around white etching layer during uniaxial loading

Jessop, C., Ahlström, J., Persson, C. & Zhang, Y., 2020, In : Fatigue and Fracture of Engineering Materials and Structures. 43, 1, p. 201-208

Research output: Contribution to journalJournal articleResearchpeer-review

Deformation Microstructure and Recovery

Yu, T., 2020, Recrystallization: Types, Techniques and Applications. Huang, K. (ed.). Nova Science Publishers, p. 1-44

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Dislocation density in fine grain-size spark-plasma sintered aluminum measured using high brightness synchrotron radiation

Zhang, C. L., Godfrey, A., Zhang, Y., Wu, G. L., Xu, R., Liu, W. & Juul Jensen, D., 2020, In : Materials Letters. 269, 4 p., 127653.

Research output: Contribution to journalJournal articleResearchpeer-review

Effect of polymer relaxation in automated micro polishing

Ben Achour, S., Zhu, W., Bissacco, G., Beaucamp, A. & De Chiffre, L., 2020, In : AIP Conference Proceedings. 2205, 1, 5 p., 020060.

Research output: Contribution to journalConference articleResearchpeer-review

Effects of heat and pressure on hot-pressed geopolymer

Ranjbar, N., Kashefi, A., Ye, G. & Mehrali, M., 2020, In : Construction and Building Materials. 231, 8 p., 117106.

Research output: Contribution to journalJournal articleResearchpeer-review

Electrically Conducting Hydrogel Graphene Nanocomposite Biofibers for Biomedical Applications

Talebian, S., Mehrali, M., Raad, R., Safaei, F., Xi, J., Liu, Z. & Foroughi, J., 2020, In : Frontiers in Chemistry. 8, 11 p., 88.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Fiber-reinforced geopolymer composites: A review

Ranjbar, N. & Zhang, M., 2020, In : Cement and Concrete Composites. 107, 19 p., 103498.

Research output: Contribution to journalJournal articleResearchpeer-review

Implications of lattice structures on economics and productivity of metal powder bed fusion

Flores, I., Kretzschmar, N., Azman, A. H., Chekurov, S., Pedersen, D. B. & Chaudhuri, A., 2020, In : Additive Manufacturing. 31, 17 p., 100947.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
13 Downloads (Pure)

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, F., Basso, A., Kain, M., Loaldi, D., Li, D., Zhang, Y. & Tosello, G., 2020, In : AIP Conference Proceedings. 2205, 1, 5 p., 020013.

Research output: Contribution to journalConference articleResearchpeer-review

Measurement of polymers with 3D optical scanners: evaluation of the subsurface scattering effect through five miniature step gauges: Paper

Guerra, M. G., Gregersen, S. K. S., Frisvad, J. R., De Chiffre, L., Lavecchia, F. & Galantucci, L. M., 2020, In : Measurement Science and Technology. 31, 1, 15 p., 015010.

Research output: Contribution to journalJournal articleResearchpeer-review

Mechanical properties of additively manufactured die with numerical analysis in extrusion process

Davoudinejad, A., Bayat, M., Larsen, A., Pedersen, D. B., Hattel, J. H. & Tosello, G., 2020, In : A I P Conference Proceedings Series. 2205, 1, 5 p., 020006 .

Research output: Contribution to journalConference articleResearchpeer-review

Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method

Xu, C. L., Andriollo, T., Zhang, Y. B., Hernando, J. C., Hattel, J. & Tiedje, N., 2020, In : Scripta Materialia. 178, p. 463 - 467

Research output: Contribution to journalJournal articleResearchpeer-review

Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys

Lozinko, A., Zhang, Y., Mishin, O. V., Klement, U. & Guo, S., 2020, In : Journal of Alloys and Compounds. 822, 7 p., 153558.

Research output: Contribution to journalJournal articleResearchpeer-review

Microstructural evolution in Mg-3Gd during accumulative roll-bonding

Luo, X., Feng, Z., Yu, T., Huang, T., Li, R., Wu, G., Hansen, N. & Huang, X., 2020, (Accepted/In press) In : Materials Science and Engineering A. 772, 138763.

Research output: Contribution to journalJournal articleResearchpeer-review

Microstructural modelling of above β-transus heat treatment of additively manufactured Ti-6Al-4V using cellular automata

De Baere, D., Mohanty, S. & Hattel, J. H., 2020, In : Materials Today Communications. 24, 12 p., 101031.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Microstructure Control in 3D Printing with Digital Light Processing

Luongo, A., Falster, V., Doest, M. B., Ribo, M. M., Eiriksson, E. R., Pedersen, D. B. & Frisvad, J. R., 2020, (Accepted/In press) In : Computer Graphics Forum.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
32 Downloads (Pure)

Modelling the filling behavior of micro structured plastic optical components

Loaldi, D., Quagliotti, D., Calaon, M. & Tosello, G., 2020, (Accepted/In press) Proceedings of WCMNM 2018. 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Multi-metal additive manufacturing process chain for optical quality mold generation

Biondani, F. G., Bissacco, G., Mohanty, S., Tang, P. T. & Hansen, H. N., 2020, In : Journal of Materials Processing Technology. 277, 6 p., 116451.

Research output: Contribution to journalJournal articleResearchpeer-review

On the drying process of molded pulp products: Experiments and numerical modelling

Didone, M., Mohanty, S., Hattel, J. H., Sonne, M. R., Fiordaliso, E. M., Checchi, A. & Tosello, G., 2020, (Accepted/In press) In : Drying Technology.

Research output: Contribution to journalJournal articleResearchpeer-review

Reference standards for XCT measurements of additively manufactured parts

Obaton, A-F., Klingaa, C. G., Rivet, C., Mohaghegh, K., Baier, S., Andreasen, J. L., Carli, L. & De Chiffre, L., 2020. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File

Replication of micro-structured surfaces by integrating AM with PIM

Basso, A., Mendez Ribo, M., Christensen, S. E., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2020, (Accepted/In press). 1 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Resistance sintering of NdFeBCo permanent magnets and analysis of their properties

Cannella, E., Nielsen, C. V. & Bay, N., 2020, (Accepted/In press) In : CIRP Journal of Manufacturing Science and Technology.

Research output: Contribution to journalJournal articleResearchpeer-review

Soft tooling process chain for the manufacturing of micro-functional features on molds used for molding of paper bottles

Saxena, P., Bissacco, G., Meinert, K. Æ., Danielak, A. H., Méndez Ribó, M. & Pedersen, D. B., 2020, In : Journal of Manufacturing Processes. 54, p. 129-137

Research output: Contribution to journalJournal articleResearchpeer-review

Subgrain dynamics during recovery of partly recrystallized aluminium

Ahl, S. R., Simons, H., Detlefs, C., Juul Jensen, D. & Poulsen, H. F., 2020, In : Acta Materialia. 185, p. 142-148 7 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd

Luo, X., Feng, Z., Yu, T., Luo, J., Huang, T., Wu, G., Hansen, N. & Huang, X., 2020, In : Acta Materialia. 183, p. 398-407

Research output: Contribution to journalJournal articleResearchpeer-review

Use of Miniature Step Gauges to Assess the Performance of 3D Optical Scanners and to Evaluate the Accuracy of a Novel Additive Manufacture Process

Guerra, M. G., De Chiffre, L., Lavecchia, F. & Galantucci, L. M., 2020, In : Sensors. 20, 3, 17 p., 738.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
2019

2D and 3D characterization of rolling contact fatigue cracks in manganese steel wing rails from a crossing

Dhar, S., Danielsen, H. K., Fæster, S., Rasmussen, C. J. & Juul Jensen, D., 2019, In : Wear. 436-437, 202959.

Research output: Contribution to journalJournal articleResearchpeer-review

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 71-74

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
20 Downloads (Pure)

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019. 2 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

Open Access
File
19 Downloads (Pure)

A Characterization Study Relating Cross-Sectional Distribution of Fiber Volume Fraction and Permeability

Rasmussen, F. S., Sonne, M. R., Larsen, M., Mikkelsen, L. P. & Hattel, J. H., 2019, Proceedings of 22nd International Conference on Composite Materials. 7 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
75 Downloads (Pure)

Additive Manufacturing of Fiber-Reinforced Polymers

Hofstätter, T., 2019, Kgs. Lyngby: Technical University of Denmark. 259 p.

Research output: Book/ReportPh.D. thesis

Open Access
File
516 Downloads (Pure)

Additive Manufacturing of Microreservoir Devices for Oral Drug Delivery Using an Acculas BA-30 Micro-Stereolithography Instrument: A Feasibility Study

Vaut, L., Jensen, K. E., Tosello, G., Khosla, A., Furukawa, H. & Boisen, A., 2019, In : Journal of The Electrochemical Society. 166, 9, p. B3257-B3263

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
189 Downloads (Pure)

Aging of 3D-printed maraging steel

Thorsteinsdóttir, E. G., Primdahl, D. S., Zhang, Y. B., Juul Jensen, D. & Yu, T., 2019, In : I O P Conference Series: Materials Science and Engineering. 580, 1, 6 p., 012047.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
25 Downloads (Pure)

A kinematic analysis of the Spraino® realignment mechanism during simulated noncontact ankle sprain injuries

Lysdal, F. G., Jakobsen, L., Grønlykke, T. B. & Kersting, U., 2019, In : Footwear Science. 11, sup1, p. S167-S169

Research output: Contribution to journalConference abstract in journalResearchpeer-review

Alignment of sample position and rotation during in situ synchrotron X‐ray micro‐diffraction experiments using a Laue cross‐correlation approach

Zhang, C., Zhang, Y., Wu, G., Liu, W., Xu, R., Juul Jensen, D. & Godfrey, A. W., 2019, In : Journal of Applied Crystallography. 52, 5, 9 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
61 Downloads (Pure)