Manufacturing Engineering

2023

3D mapping of residual stresses in growing grains of partially recrystallized Gum Metal

Lindkvist, A., Liu, W., Jensen, D. J. & Zhang, Y., 2023, In: Materials Research Letters. 11, 11, p. 942-948

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

1 Downloads (Pure)

3-D-Printed Models for Temporal Bone Training: A Validity Study

Frithioff, A., Frendø, M., Weiss, K., Foghsgaard, S., Mikkelsen, P. T., Frederiksen, T. W., Pedersen, D. B., Sørensen, M. S. & Andersen, S. A. W., 2023, In: Otology and Neurotology. 44, 7, p. E497-E503

Research output: Contribution to journal › Journal article › Research › peer-review

4E Transient Analysis of a Solar-Hybrid Gas-Turbine Cycle Equipped with Heliostat and MED

Ghasemiasl, R., Dehghanizadeh, H., Javadi, M. A. & Abdolmaleki, M., 2023, In: Sustainability. 15, 11, 26 p., 8792.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

16 Downloads (Pure)

A CFD model with free surface tracking: predicting fill level and residence time in a starve-fed single-screw extruder

Olofsson, E. H., Roland, M., Spangenberg, J., Jokil, N. H. & Hattel, J. H., 2023, In: International Journal of Advanced Manufacturing Technology. 126, p. 3579–3591

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

27 Downloads (Pure)

A computational model for stereolithography apparatus (SLA) 3D printing

Vidhu, N., Gupta, A., Salajeghe, R., Spangenberg, J. & Marla, D., 2023, (Accepted/In press) In: Progress in Additive Manufacturing.

Research output: Contribution to journal › Journal article › Research › peer-review

A discussion of model asperities as a method to study friction in metal forming

Zwicker, M., Bay, N. & Nielsen, C. V., 2023, In: Discover Mechanical Engineering. 2, 1, 14 p., 3.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

31 Downloads (Pure)

Advances in precision microfabrication through digital light processing: system development, material and applications

Wang, X., Liu, J., Zhang, Y., Kristiansen, P. M., Islam, A., Gilchrist, M. & Zhang, N., 2023, In: Virtual and Physical Prototyping. 18, 1, p. e2248101 42 p.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

14 Downloads (Pure)

A new test for sheet metal asperity flattening under varying subsurface strain conditions

Zwicker, M. F. R., Bay, N. & Nielsen, C. V., 2023, In: Tribology International. 180, 7 p., 108249.

Research output: Contribution to journal › Journal article › Research › peer-review

A novel ironing punch concept with adjustable tool diameter

Nielsen, C. V., Arinbjarnar, Ú., Ceron, E., Madsen, T. L., Møller, B., Madsen, K. M. & Siimut, K., 2023, In: CIRP Annals - Manufacturing Technology. 72, 1, p. 213-216

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

3 Downloads (Pure)

Application of Machine Learning for Prediction and Process Optimization-Case Study of Blush Defect in Plastic Injection Molding

Mollaei Ardestani, A., Azamirad, G., Shokrollahi, Y., Calaon, M., Hattel, J. H., Kulahci, M., Soltani, R. & Tosello, G., 2023, In: Applied Sciences. 13, 4, 21 p., 2617.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

49 Downloads (Pure)

Application of Mask R-CNN for lab-based X-ray diffraction contrast tomography

Fang, H., Hovad, E., Zhang, Y. & Jensen, D. J., 2023, In: Materials Characterization. 201, 11 p., 112983.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

36 Downloads (Pure)

Biocarbon-based sustainable reinforcing system for technical polymers. The structure-properties correlation between polycarbonate (PC) and polybutylene terephthalate (PBT)-based blends containing acrylonitrile-butadiene-styrene (ABS)

Andrzejewski, J., Danielak, A., Piasecki, A., Islam, A. & Szostak, M., 2023, In: Sustainable Materials and Technologies. 36, 19 p., e00612.

Research output: Contribution to journal › Journal article › Research › peer-review

Cementitious phase quantification using deep learning

Sheiati, S., Nguyen, H., Kinnunen, P. & Ranjbar, N., 2023, In: Cement and Concrete Research. 172, 13 p., 107231.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

21 Downloads (Pure)

Characterization of Pt-coated twin paraboloidal laboratory capillary high energy X-ray optics

Seret, A., Kehres, J., Gundlach, C., Olsen, U. L., Poulsen, H. F., Jensen, D. J., Cordier, M., Stripe, B., Yun, W. & Zhang, Y., 2023, In: Optics Express. 31, 23, p. 38840-38853

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

7 Downloads (Pure)

Characterization of the Fracture Forming Limits by Radial Extrusion

Sampaio, R. F. V., Pragana, J. P. M., Bragança, I. M. F., Silva, C. M. A., Nielsen, C. V. & Martins, P. A. F., 2023, In: Journal of Manufacturing and Materials Processing. 7, 3, 17 p., 107.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

9 Downloads (Pure)

Computational analysis of yield stress buildup and stability of deposited layers in material extrusion additive manufacturing

Mollah, M. T., Comminal, R., Serdeczny, M. P., Šeta, B. & Spangenberg, J., 2023, In: Additive Manufacturing. 71, 12 p., 103605.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

10 Downloads (Pure)

Computational Fluid Dynamics Modeling of Top-Down Digital Light Processing Additive Manufacturing

Moghadasi, H., Mollah, M. T., Marla, D., Saffari, H. & Spangenberg, J., 2023, In: Polymers. 15, 11, 12 p., 2459.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

5 Downloads (Pure)

Computational fluid dynamics modelling and experimental analysis of reinforcement bar integration in 3D concrete printing

Mollah, M. T., Comminal, R., Leal da Silva, W. R., Šeta, B. & Spangenberg, J., 2023, In: Cement and Concrete Research. 173, 13 p., 107263.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

9 Downloads (Pure)

Contribution of grain boundary to strength and electrical conductivity of annealed copper wires

Dong, L., Yang, F., Yu, T., Zhang, N., Zhou, X., Xie, Z. & Fang, F., 2023, In: Journal of Materials Research and Technology. 26, p. 1459-1468

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

45 Downloads (Pure)

Cross diffusion governs an oscillatory instability in a ternary mixture with the Soret effect

Seta, B., Errarte, A., Mialdun, A., Ryzhkov, I. I., Bou-Ali, M. M. & Shevtsova, V., 2023, In: Physical Chemistry Chemical Physics. 23, p. 15715-15728

Research output: Contribution to journal › Journal article › Research › peer-review

Cutting force model and damage formation mechanism in milling of 70wt% Si/Al composite

Zhao, G., Xin, L., Li, L., Zhang, Y., He, N. & Nørgaard Hansen, H., 2023, In: Chinese Journal of Aeronautics. 36, 7, p. 114-128

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

1 Downloads (Pure)

Dependence of Charpy Impact Properties of Fe-30Mn-0.05C Steel on Microstructure

Xiong, J., Li, H., Kong, L., Zhang, X., Cao, W. & Wang, Y., 2023, In: Crystals. 13, 2, 15 p., 353.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

11 Downloads (Pure)

Design Aspects in Vat Photopolymerization Additive Manufacturing of Hydrophobic Surfaces

Danielak, A., Islam, A., Cappelletto, N., Garza Agudelo, D. M. & Pedersen, D. B., 2023, (Accepted/In press) In: 3D Printing and Additive Manufacturing.

Research output: Contribution to journal › Journal article › Research › peer-review

Dislocation Mechanisms and Local Strength with a View towards Sleeper Screw Failures

Lin, K., Zhou, L., Juul Jensen, D. & Zhang, X., 2023, In: Crystals. 13, 4, 11 p., 656.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

4 Downloads (Pure)

Dynamic and Static Friction Measurements of Elastomer Footwear Blocks on Ice Surface

Jakobsen, L., Auganæs, S. B., Buene, A. F., Sivebaek, I. M. & Klein-Paste, A., 2023, In: Tribology International. 178, 11 p., 108064.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

95 Downloads (Pure)

Effect of heat transfer through an interface on convective melting dynamics of phase change materials

Seta, B., Dubert, D., Gavalda, J., Massons, J., Bou-Ali, M. M. M., Ruiz, X. & Shevtsova, V., 2023, In: Journal of Fluid Mechanics. 966, 27 p., A46.

Research output: Contribution to journal › Journal article › Research › peer-review

Effect of heat treatment processes on the microstructure and mechanical properties of spray-formed 440C martensitic stainless steel

Rodríguez H., V., Hugo López-Morelos, V., Nadimpalli, V. K., Bue Pedersen, D., Ruiz, A. & Somers, M. A. J., 2023, In: Steel Research International. 94, 6, 10 p., 2200749.

Research output: Contribution to journal › Journal article › Research › peer-review

Effect of tempering temperature on the wear behaviour of martensitic ductile iron

Bai, J., Xu, H., Chen, X., Cao, W., Zhang, X. & Xu, Y., 2023, In: Materials Science and Technology. 39, 6, p. 744–755

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

Effect of workpiece pre-straining on tribological performance of surface coatings in sheet metal forming

Arinbjarnar, Ú. & Nielsen, C. V., 2023, In: Tribology International. 180, 13 p., 108262.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

18 Downloads (Pure)

Effects of initial 3D printed microstructures on subsequent microstructural evolution in 316L stainless steel

Zhang, C., Juul Jensen, D. & Yu, T., 2023, In: Acta Materialia. 242, 10 p., 118481.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

51 Downloads (Pure)

Enhancement of viscoelastic property of MABS processed by melt compounding and injection molding

Abu Shaid Sujon, M., Madsen, J., de Claville Christiansen, J. & Islam, A., 2023, In: Journal of Applied Polymer Science. 140, 2, 12 p., e53309.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

2 Downloads (Pure)

Enhancing vibration damping properties of MABS/VDT blends using SEBS-g-MAH as a compatibilizer

Sujon, M. A. S., Andriollo, T. & Islam, A., 2023, In: Journal of Polymer Research. 30, 12, 9 p., 440.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

Experimental Analysis and Spatial Component Impact of the Inert Cross Flow in Open-Architecture Laser Powder Bed Fusion

Kjer, M. B., Pan, Z., Nadimpalli, V. K. & Pedersen, D. B., 2023, In: Journal of Manufacturing and Materials Processing. 7, 4, 15 p., 143.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

15 Downloads (Pure)

Exploring Force Sensing With 3-D Printing: A Study on Constriction Resistance and Contact Phenomena

Wolstrup, A. F., Molzen, A. E., Spangenberg, J. & Zsurzsan, T. G., 1 May 2023, In: IEEE Sensors Letters. 7, 5, 4 p., 10101868.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

34 Downloads (Pure)

Fabricating of a custom 3D-printed setup for evaluating gel-based strain sensors

Kohestanian, M., Hasany, M., Najafi Tireh Shabankareh, A. & Mehrali, M., 2023, In: Alexandria Engineering Journal. 76, p. 517-523

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

9 Downloads (Pure)

Fabrication of conductive structures in volumetric additive manufacturing through embedded 3-D printing for electronic applications

Wolstrup, A. F., Dagnæs-Hansen, J. T., Brandt, O. V., Meile, D. H., Kruse, C. S., Spangenberg, J. & Zsurzsan, T. G., 2023, In: Additive Manufacturing Letters. 7, 5 p., 100178.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

3 Downloads (Pure)

Flexible BioMEMS devices enabled by micromachining of plasma-polymerized fluorocarbon

Chang, B., Liu, X., Bertram, N. & Han, A., 2023, In: Micro and Nano Engineering. 19, 6 p., 100177.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

24 Downloads (Pure)

Flow-Induced Fibre Compaction in Resin-Injection Pultrusion

Sandberg, M., Hattel, J. H. & Spangenberg, J., 2023, In: Transport in Porous Media. 147, 3, p. 541-571

Research output: Contribution to journal › Journal article › Research › peer-review

Geometric characterization of orthogonally printed layers in material extrusion additive manufacturing: numerical modeling and experiments

Jafarzadeh, S., Comminal, R., Serdeczny, M. P., Bayat, M., Bahl, C. R. H. & Spangenberg, J., 2023, (Accepted/In press) In: Progress in Additive Manufacturing. 12 p.

Research output: Contribution to journal › Journal article › Research › peer-review

Halloysite reinforced 3D-printable geopolymers

Ranjbar, N., Kuenzel, C., Gundlach, C., Kempen, P. & Mehrali, M., 2023, In: Cement and Concrete Composites. 136, 12 p., 104894.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

59 Downloads (Pure)

Holistic computational design within additive manufacturing through topology optimization combined with multiphysics multi-scale materials and process modelling

Bayat, M., Zinovieva, O., Ferrari, F., Ayas, C., Langelaar, M., Spangenberg, J., Salajeghe, R., Poulios, K., Mohanty, S., Sigmund, O. & Hattel, J., 2023, In: Progress in Materials Science. 138, 117 p., 101129.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

6 Downloads (Pure)

Ice lithography using tungsten hexacarbonyl

Haque, R. I., Waafi, A. K., Chang, B. & Han, A., 2023, In: Micro and Nano Engineering. 18, 6 p., 100171.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

49 Downloads (Pure)

Improvement in mechanical properties and microstructure of electric arc furnace slag bricks by microbial accelerated carbonation

Su, Y., Jin, P. & Zhan, Q., 2023, In: Journal of Sustainable Cement-Based Materials. 12, 8, p. 1033-1047

Research output: Contribution to journal › Journal article › Research › peer-review

In-Situ Study of Temperature- and Magnetic-Field-Induced Incomplete Martensitic Transformation in Fe-Mn-Ga

Sun, X., Cui, J., Li, S., Ma, Z., Liss, K. D., Li, R. & Chen, Z., 2023, In: Crystals. 13, 8, 13 p., 1242.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

International round robin test of environmentally benign lubricants for cold forging

Volz, S., Launhardt, J., Bay, N., Hu, C., Moreau, P., Dubar, L., Nielsen, C., Hayakawa, K., Kitamura, K. & Groche, P., 2023, In: CIRP Annals - Manufacturing Technology. 72, 1, p. 245-250

Research output: Contribution to journal › Journal article › Research › peer-review

Machine Learning in Manufacturing towards Industry 4.0: From ‘For Now’ to ‘Four-Know’

Chen, T., Sampath, V., May, M. C., Shan, S., Jorg, O. J., Aguilar Martín, J. J., Stamer, F., Fantoni, G., Tosello, G. & Calaon, M., 2023, In: Applied Sciences. 13, 3, 32 p., 1903.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

158 Downloads (Pure)

Medio-lateral and lateral edge friction in indoor sports shoes

Bagehorn, T., Lysdal, F. G., Jakobsen, L., de Zee, M. & Kersting, U. G., 2023, In: Footwear Science. 15, 1, p. 17-27

Research output: Contribution to journal › Journal article › Research › peer-review

MEMS micro-coils for magnetic neurostimulation

Liu, X., Whalen, A. J., Ryu, S. B., Lee, S. W., Fried, S. I., Kim, K., Cai, C., Lauritzen, M., Bertram, N., Chang, B., Yu, T. & Han, A., 2023, In: Biosensors and Bioelectronics. 227, 8 p., 115143.

Research output: Contribution to journal › Journal article › Research › peer-review

Open Access

File

20 Downloads (Pure)

Microencapsulation of eutectic phase change materials for temperature management of the satellite electronic board

Rostamian, F., Etesami, N. & Mehrali, M., 2023, In: Applied Thermal Engineering. 236, 11 p., 121592.

Research output: Contribution to journal › Journal article › Research › peer-review

Microstructure and rolling contact fatigue behavior of martensitic nodular cast irons with different graphite sizes and densities

Bai, J., Cao, Z., Xu, H., Wang, C., Chen, X., Cao, W., Zhang, X. & Xu, Y., 2023, In: Fatigue Fracture of Engineering Materials Structures. 46, 8, p. 2966-2981

Research output: Contribution to journal › Journal article › Research › peer-review

Manufacturing Engineering

Publications

Search results