Manufacturing Engineering

2023

A systematic comparison between green and infrared laser for laser powder bed fusion of pure copper through a benchmark artefact

Alphonso, W. E., Bayat, M., Nadimpalli, V. K. & Hattel, J. H., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 137-140

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Characterization of Digital Light Processing and Two-Photon Polymerization 3D printing technologies for micro-manufacturing

Saeedabadi, K., Tosello, G., Rezaei, B., Bunea, A-I., Keller, S. S. & Calaon, M., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 183-186

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Direct additive manufacturing of hydrophobic microstructures using soft polymer

Duran, M. M., Zhang, Y. & Islam, A., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 133-134

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

28 Downloads (Pure)

Dual color tomographic volumetric printing for stiffness-graded scaffold

Wang, B., Engay, E., Yang, Y. & Islam, A., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 119-120

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

49 Downloads (Pure)

Experimental testing and characterization of additively manufactured CF-PEEK dies for complex profile in polymer profile extrusion

Aimon, A. H., Tosello, G., Pedersen, D. B. & Calaon, M., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 93-94

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

In-process monitoring of selective thermoplastic electrophotographic process by laser profiling system and digital fingerprint

Shan, S., Yeh, H. P., Rotari, M., Meinert, K. Æ., Hattel, J. H., Pedersen, D. B., Kulahci, M., Hansen, H. N., Zhang, Y. & Calaon, M., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 181-182

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Laser-induced selective activation of polyimide for robust electroless plating

Ren, J., Li, D., Zhang, Y. & Liu, Y., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 527-528

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Simple sensor manufacturing by Laser Powder Bed Fusion of conductive polymer blends

Budden, C. L., Grønborg, F., Wolstrup, A. F., Lalwani, A. R., Zsurzsan, T. G., Daugaard, A. E. & Pedersen, D. B., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 123-126

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Spectral assessment of surface topography

Quagliotti, D., Tuttolomondo, C., Maculotti, G., Genta, G., Galetto, M. & Hansen, H. N., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 351-354

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

33 Downloads (Pure)

Uncertainty evaluation of diameter measurement in float-zone crystal growth production

Chen, T., Tosello, G., Conrad-Hansen, L. & Calaon, M., 2023, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 23rd International Conference and Exhibition, EUSPEN 2023. Riemer, O., Nisbet, C. & Phillips, D. (eds.). euspen, p. 179-180

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

2022

A Numerical Investigation of the Inter-Layer Bond and Surface Roughness during the Yield Stress Buildup in Wet-On-Wet Material Extrusion Additive Manufacturing

Mollah, M. T., Serdeczny, M. P., Comminal, R., Seta, B., Brander, M., Pedersen, D. B. & Spangenberg, J., 2022, 2022 ASPE and euspen Summer Topical Meeting. American Society for Precision Engineering, Vol. 77. p. 131-134

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Investigation on semi-virtual dataset based semantic segmentation for injection moulding process monitoring

Shan, S., Frumosu, F. D., M.Ribo, M., Calaon, M. & Zhang, Y., 2022, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 22nd International Conference and Exhibition, EUSPEN 2022. Leach, R. K., Akrofi-Ayesu, A., Nisbet, C. & Phillips, D. (eds.). euspen, p. 175-176

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

46 Downloads (Pure)

Micro-injection moulding simulation and manufacturing of polymer chips for acoustic separation

Saeedabadi, K., Lickert, F., Ohlin, M., Bruus, H., Tosello, G. & Calaon, M., 2022, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 22nd International Conference and Exhibition, EUSPEN 2022. Leach, R. K., Akrofi-Ayesu, A., Nisbet, C. & Phillips, D. (eds.). euspen, p. 323 - 326

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Modelling of Additive Manufacturing - Compression Molding Process Using Computational Fluid Dynamics

Seta, B., Brander, M., Mollah, M. T., Kumar, V., Kumar Pokkalla, D., Kim, S. & Spangenberg, J., 2022, 2022 ASPE and euspen Summer Topical Meeting. American Society for Precision Engineering, Vol. 77. p. 119-123

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Vision based diameter estimation for continuous float-zone silicon crystal growth production

Chen, T., Tosello, G., Werner, N. & Calaon, M., 2022, European Society for Precision Engineering and Nanotechnology, Conference Proceedings: 22nd International Conference and Exhibition, EUSPEN 2022. Leach, R. K., Akrofi-Ayesu, A., Nisbet, C. & Phillips, D. (eds.). euspen, p. 419 - 422

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

2019

3d Printed Mold for Powder Injection Molding Process

Basso, A., Mendez Ribo, M., Danielak, A. H., Yang, B., Kjeldsteen, P., Valler, P., Pedersen, D. B. & Zhang, Y., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 71-74

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

405 Downloads (Pure)

A method for identification and quantification of thermal lensing in powder bed fusion

Andersen, S. A., Valente, E. H., Nadimpalli, V. K., Hansen, H. N. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 230-233

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

197 Downloads (Pure)

A study on the feasibility of in-process compensation of cutting force induced errors using axes motors absorbed current

Checchi, A., Dalla Costa, G., Haastrup Merrild, C., Bissacco, G. & Hansen, H. N., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 194-195

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

119 Downloads (Pure)

Build orientation effects on the roughness of SLM channels

Klingaa, C. G., Dahmen, T., Baier, S., Mohanty, S. & Hattel, J. H., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 111-114

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

205 Downloads (Pure)

Characterization techniques for evaluation of micro scale vat photopolymerization-based additive manufacturing

Danielak, A. H., Mendez Ribo, M., Üstünyagiz, E., Almdal, K., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 44-47

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Considerations for interpreting in-situ photodiode sensor data in pulsed mode laser powder bed fusion

Karthik Nadipalli, V., Andersen, S. A., Nielsen, J. S. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 66-69

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

350 Downloads (Pure)

Dimensional and Form Characterization of a Benchmarking Specimen Subjected to Different Post‐Processing Technologies for Metal Additive Manufacturing

Kain, M., Loaldi, D., Davoudinejad, A., Calaon, M., Vedel-Smith, N. K., Haahr‐Lillevang, L., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 104-5

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

154 Downloads (Pure)

Direct Fabrication of Microstructured Surfaces by Additive Manufacturing

Davoudinejad, A., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 118-119

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

109 Downloads (Pure)

Experimental analysis of the filament feeding force in material extrusion additive manufacturing

Serdeczny, M. P., Comminal, R., Pedersen, D. B. & Spangenberg, J., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 141-145

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

188 Downloads (Pure)

Geometrical shape assessment of additively manufactured features by Continuous Liquid Interface Production, vat photopolymerization method

Davoudinejad, A., Jessen, A. K., Farahani, S. D., Franke, N., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 116-117

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

95 Downloads (Pure)

Impact of post-processing stages on vat-photopolymerized specimens

M. Ribo, M., Danielak, A. H., Andersen, S. A., Üstünyagiz, E., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 155 1 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

133 Downloads (Pure)

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, E. H., Nadimpalli, V. K., Andersen, S. A., Pedersen, D. B., Christiansen, T. L. & Somers, M. A. J., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 244-247

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

306 Downloads (Pure)

Influence of the post-curing treatment on the mechanical properties in the vat photopolymerization technique

Üstünyagiz, E., Danielak, A. H., M. Ribo, M. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 132 1 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

124 Downloads (Pure)

Methodology for geometric characterization and dimensioning of additively manufactured channels

Dahmen, T., Klingaa, C. G., Baier, S., Pedersen, D. B. & Hattel, J. H., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 133-136

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

117 Downloads (Pure)

Micro product and process fingerprints for zero-defect net-shape micromanufacturing

Tosello, G., Gulcur, M., Whiteside, B., Coates, P., Luca, A., Vinícius, P., Lia, D. S., Riemer, O., Danilov, I., Zanjani, M. Y., Hackert-Oschätzchen, M., Schubert, A., Baruffi, F., Achour, S. B., Calaon, M., Nielsen, C. V., Bissacco, G., Cannella, E., Rasmussen, A., Bellotti, M., & 12 othersSaxena, K., Qian, J., Reynaerts, D., Syam, W., Leach, R., Kose, S. K., Parenti, P., Annoni, M., Cai, Y., Luo, X., Qin, Y. & Zeidler, H., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 98-99

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

115 Downloads (Pure)

Modelling of material deposition in big area additive manufacturing and 3D concrete printing

Comminal, R., Serdeczny, M. P., Ranjbar, N., Mehrali, M., Pedersen, D. B., Stang, H. & Spangenberg, J., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 151-154

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

408 Downloads (Pure)

Multi-material additive manufacturing of steels using laser powder bed fusion

Nadimpalli, V. K., Dahmen, T., Valente, E. H., Mohanty, S. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 240-243

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

616 Downloads (Pure)

Optimization of a self-peeling vat for precision vat photopolymerization setups

M. Ribo, M., Danielak, A. H., Islam, A. & Pedersen, D. B., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 234-237

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

214 Downloads (Pure)

Quality Assurance of Reference Specimens Manufactured by Continuous Liquid Interface Production Using Coordinate Metrology

Kain, M., Davoudinejad, A., Quagliotti, D., Nielsen, J. S., Liltorp, K., Pedersen, D. B., Farahani, S. D., Franke, N. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 248-249

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

109 Downloads (Pure)

Simulation of thin features machining by micro end-milling using finite element modelling

Davoudinejad, A., Li, D., Zhang, Y. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 120-121

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

71 Downloads (Pure)

Strain gauge filament for extrusion based additive manufacturing

Madsen, F. G., Pedersen, D. B. & Daugaard, A. E., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 54 1 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

80 Downloads (Pure)

Tapping AFM measurements artefacts in the acquisition of high-aspect-ratio rectangular nanostructures using dedicated sharp tips

Loaldi, D., Quagliotti, D., Calaon, M., Czolkos, I., Johansson, A., Nielsen, T., Garnaes, J. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 336-337

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

6 Downloads (Pure)

Thermal characterization of a micro polishing machine and effect on path strategy compensation

Ben Achour, S., Checchi, A., Bissacco, G. & De Chiffre, L., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 446-447

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

104 Downloads (Pure)

2018

A 5D DoF Parallel Kinematic Controler For Big Area Additive Manufacturing

Jensen, M. L., K. Kiewning, M., Spangenberg, J., Andersen, S. B., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 167-171

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

A Beam Modulator and Galvanometer Controller for Metal Powder Bed Fusion

Andersen, S. A., Del Rio, S., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 172-177

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

1 Downloads (Pure)

A new design for an extensive benchmarking of additive manufacturing machines

Moshiri, M., Tosello, G. & Mohanty, S., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 261-262

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

174 Downloads (Pure)

Applicability of Acoustic Emission monitoring to micro polishing

Ben Achour, S., Bissacco, G. & De Chiffre, L., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 385-386

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

124 Downloads (Pure)

Application of modelling tools for precise transfer of nanostructures from silicon wafers to steel injection moulding tool inserts

Sonne, M. R. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 59-60

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

61 Downloads (Pure)

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, A., Charalambis, A., Tosello, G., Zhang, Y., Calaon, M., Pedersen, D. B. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 383-384

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

81 Downloads (Pure)

Automated contact area measurement on structured surfaces

Kücükyildiz, Ö. C., Jensen, S. H. N. & De Chiffre, L., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 473-474

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

60 Downloads (Pure)

Characterisation of the Influence of the Colour in Resin for Micro Parts Production by Photopolymerisation Based Additive Manufacturing System

Danielak, A. H., M. Ribo, M., Pedersen, D. B. & Islam, A., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 64-69

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Computer vision for focus calibration of photo-polymerization systems

Ingwersen, C. K., Mortensen, H. L., Ribo, M. M., Danielak, A. H., Eiríksson, E. R., Nielsen, A. A. & Pedersen, D. B., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 89-91

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Considerations on numerical modelling for compensation of in-process metrology in manufacturing

Sonne, M. R., Mohammadi, A., Dalla Costa, G., Madruga, D. G., De Chiffre, L. & Hattel, J. H., 2018, Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology . Billington, D. B., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 453-454

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

80 Downloads (Pure)

Effects of subsurface scattering on the accuracy of optical 3D measurements using miniature polymer step gauges

Wilm, J., Madruga, D. G., Jensen, J. N., Gregersen, S. K. S., Doest, M. E. B., Guerra, M. G., Aanæs, H. & De Chiffre, L., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 449-450

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

1 Downloads (Pure)

Evaluation of part consistency with photopolymer inserts in different injection moulding process parameters

Davoudinejad, A., Charalambis, A., Zhang, Y., Calaon, M., Tosello, G. & Hansen, H. N., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D. B., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 253-254

Research output: Chapter in Book/Report/Conference proceeding › Conference abstract in proceedings › Research › peer-review

Open Access

File

43 Downloads (Pure)

Manufacturing Engineering

Publications

Search results