Manufacturing Engineering

2010

Cavity Pressure Behaviour in Micro Injection Moulding

Griffiths, C. A., Dimov, S. S., Scholz, S., Hirshy, H., Tosello, G., Hansen, H. N. & Williams, E., 2010, Proceedings of the 7. International Conference on Multi-Material Micro Manufacture. Research Publishing Services, p. 291-294

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Characterization of Laser Machined Polymer Surface Using Bearing Area Curve Parameters for Future Plating

Zhang, Y., Hansen, H. N., De Grave, A., Tang, P. T. & Nielsen, J. S., 2010, ICOMM/4M2010.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Direct testing of scale effects in metal forming friction and lubrication

Nielsen, P. S., Calaon, M., Paldan, N. A. & Bay, N., 2010, Tribology of Manufacturing Processes. p. 497-506 917 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Does the interchain pressure effect exist in flow of polymer melt?

Rasmussen, H. K. (Invited author) & Hassager, O. (Invited author), 2010, AERC 2010.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

End of life environmental assessment of micro technologies: the need for the carrot or the stick?

De Grave, A., Gentil, E. & Hansen, H. N., 2010, 4M 2010. rps online, p. 143-146 323 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Environmentally Benign Lubricant Systems For Cold, Warm And Hot Forging: Keynote paper

Bay, N. (Invited author), 2010, Proceedings of the 30th SENAFOR: 14th International Forging Conference. Vol. 1. p. 297-313 542 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Environmentally Benign Lubricant Systems for Sheet Metal Stamping: Keynote paper

Bay, N. (Invited author), 2010, Proceedings 30. SENAFOR: 13. Nat. Sheet Metal Forming Conf.. Vol. 2. p. 273-295 416 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Experimental investigation on the influence of instrument settings on pixel size and nonlinearity in SEM image formation

Carli, L., Genta, G., Cantatore, A., Barbato, G., De Chiffre, L. & Levi, R., 2010, Proceedings of the 10th euspen International Conference. Vol. 1. p. 192-195

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

303 Downloads (Pure)

Friction in sheet metal forming: A Comparison between milled and manually polished surfaces

Wiklund, D., Liljebgren, M., Berglund, J., Bay, N., Kjellsson, K. & Rosén, B.-G., 2010, ICTMP 2010. Vol. 2. p. 613-622 917 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Green Lubricants for Metal Forming: Keynote paper

Bay, N. (Invited author), 2010, Tribology of Manufacturing Processes: Proceedings of the International Conference on Tribology in Manufacturing Processes. Vol. 1. p. 5-33 917 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Influence of New Sol-gel Refractory Coating on the Casting Properties of Cold Box and Furan Cores for Grey Cast iron.

Nwaogu, U. C. (Invited author), Poulsen, T. (Invited author), Bischoff, C. (Invited author) & Tiedje, N. S. (Invited author), 2010, WFC2010. Vol. Session 5-8.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Influence of surface texture on the galling characteristics of lean duplex and austenitic stainless steels

Wadman, B., Eriksen, J., Olsson, M., Schedin, E., Madsen, E. & Bay, N., 2010, (E-pub ahead of print) Proceedings Duplex World 2010 Conference & Exhibition. p. IV.B.7

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

In-line monitoring and reverse 3D model reconstruction in additive manufacturing

Pedersen, D. B. (Invited author), Hansen, H. N. (Invited author) & Nielsen, J. S. (Invited author), 2010, IWMF2010. p. 1-7

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

1 Downloads (Pure)

Integrating measuring uncertainty of tactile and optical coordinate measuring machines in the process capability assessment of micro injection moulding

Tosello, G., Hansen, H. N. & Gasparin, S., 2010, 10. International Conference of the European Society for Precision Engineering and Nanotechnology. p. 168-171

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Investigation on a replica step gauge for optical 3D scanning of micro parts

Cantatore, A. (Invited author), De Chiffre, L. (Invited author) & Carmignato, S. (Invited author), 2010, Proceedings of the euspen International Conference.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2 Downloads (Pure)

Numerical modeling of graded active magnetic regenerators

Nielsen, K. K., Bahl, C. R. H., Engelbrecht, K., Smith, A., Pryds, N. & Hattel, J. H., 2010, Thermag IV. p. 445-453

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Prediction of the impact of flow induced inhomogeneities in Self Compacting Concrete (SCC)

Spangenberg, J. (Invited author), Roussel, N. (Invited author), Hattel, J. H. (Invited author), Thorborg, J. (Invited author), Geiker, M. R. (Invited author), Stang, H. (Invited author) & Skocek, J. (Invited author), 2010, SCC2010. Rilem publications, Vol. 1. p. 209-215

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Process Condition Monitoring of Micro Moulding Using a Two-plunger Micro Injection Moulding Machine

Tosello, G., Hansen, H. N. & Guerrier, P., 2010, Proceedings of the 7. International Conference on Multi-Material Micro Manufacture. Research Publishing Services, p. 283-286

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Process control and product evaluation in micro molding using a screwless/two-plunger injection unit

Tosello, G. (Invited author), Hansen, H. N. (Invited author), Dormann, B. (Invited author), Decker, C. (Invited author) & Guerrier, P. (Invited author), 2010, ANTEC2010. Society of Plastics Engineers, p. 2161-2166

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Reversed extensional flow on polyisoprene melts

Bejenariu, A. G., Rasmussen, H. K., Auhl, D., Skov, A. L. & Hassager, O., 2010, Nordic Rheology Conference.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Surface texture metrology for high precision surfaces

Hansen, H. N. (Invited author), Gasparin, S. (Invited author) & Tosello, G. (Invited author), 2010, ICMC 2010: Sustainable Production for Resource Efficiencyand Ecomobility. Neugebauer, R. (ed.). Fraunhofer IWU, p. 427-434

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

The Effect of Grinding and Polishing Procedure of Tool Steels in Sheet Metal Forming

Lindvall, F., Bergström, J., Krakhmalev, P. & Bay, N., 2010, ICTMP 2010. Nice, p. 603-612 917 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Tolerance Verification of Micro and Nano Structures on Polycarbonate Substrates

Gasparin, S., Tosello, G. & Hansen, H. N., 2010, Proceedings of the 7. International Conference on Multi-Material Micro Manufacture. Research Publishing Services, p. 387-390

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Tool degradation during sheet metal forming of three stainless steel alloys

Wadman, B., Nielsen, P. S., Wiklund, D., Bay, N., Madsen, E. & Schedin, E., 2010, IDDRG 2010. p. 265-274

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

2009

2-dimensional numerical modeling of active magnetic regeneration

Nielsen, K. K., Pryds, N., Smith, A., Bahl, C. R. H. & Hattel, J. H., 2009, 3rd International Conference on Magnetic Refrigeration at Room Temperature. 1 ed. International Institute of Refrigeration, Vol. 1. p. 251-258 508 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

302 Downloads (Pure)

2k micro moulding for MID fabrication

Islam, A., Hansen, H. N. & Jørgensen, M. B., 2009, Polymer Process Engineering 09: PPE-Enhanced polymer processing. 1 ed. Bradford: University of Bradford, Vol. 1. p. 273-293 419 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

1006 Downloads (Pure)

A profiling platform at 915, 1075, and 1090nm

Pedersen, D. B., Hansen, K. S., Nielsen, J. S., Olsen, F. O. & Hansen, H. N., 2009, 12th NOLAMP conference 2009.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Au-Ge based Candidate Alloys for High-Temperature Lead-Free Solder Alternatives

Chidambaram, V., Hald, J. & Hattel, J. H., 2009, 2009 International Symposium on Microelectronics. International Microelectronics and packaging Society, p. 000338-000345

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Best practice strategies for validation of micro moulding process simulation

Costa, F. (Invited author), Tosello, G. (Invited author) & Whiteside, B. (Invited author), 2009, Proceedings of PPE'09: Polymer Process Engineering ‘09 Conference. Coates, Prof., P. (ed.). Bradford (United Kingdom): University of Bradford, p. 331-364 419 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Characterization and analysis of micro channels and sub-micron surface roughness of injection moulded microfluidic systems using optical metrology

Tosello, G. (Invited author), Marinello, F. (Invited author) & Hansen, H. N. (Invited author), 2009, Proceedings of PPE'09: Polymer Process Engineering ‘09 Conference. Coates, Prof., P. (ed.). Bradford (United Kingdom): University of Bradford, p. 199-232 419 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Characterization and analysis of sub-micron surface roughness of injection moulded microfluidic systems using White Light Interferometry

Tosello, G., Marinello, F. & Hansen, H. N., 2009, Proceedings of 12th International Conference on Metrology & Properties of Engineering Surfaces. Pawlus, P., Dzierwa, A. & Gałda, L. (eds.).

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Development of Focused Ion Beam technique for high speed steel 3D-SEM artefact fabrication

Carli, L. (Invited author), MacDonald, A. N. (Invited author), De Chiffre, L. (Invited author), Marinello, F. (Invited author), Carmignato, S. (Invited author) & Horsewell, A. (Invited author), 2009, Proceedings of the euspen International Conference.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Dispersion-tailored, low-loss photonic crystal fibers for the THz range

Nielsen, K., Rasmussen, H. K., Adam, A. J. L., Planken, P. C. M., Bang, O. & Jepsen, P. U., 2009, Proceedings, OTST.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

124 Downloads (Pure)

éalisation de micro systèmes passifs par technologies non silicium

De Grave, A. (Invited author) & Hansen, H. N. (Invited author), 2009, Actes du 19eme Congrès Français de Mécanique.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

EcoDesign and LCA approach toward sustainable micro products development

De Grave, A., Olsen, S. I. & Hansen, H. N., 2009, Proceedings of the MIT2009: 10th International conference on Management of Innovative Technologies.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Effects of tool die surface topography on friction and galling in sheet metal forming

Wiklund, D., Liljengren, M., Bay, N., Kjellsson, K. & Rosén, B.-G., 2009, Proceed. of the Swedish Production Symp.: SPS ’09. p. 178-183

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Electroless Plating on Plastic Induced by Selective Laser Activation

Zhang, Y., Tang, P. T., Hansen, H. N. & Nielsen, J. S., 2009, Electroless Plating on Plastic Induced by Selective Laser Activation.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

File

2118 Downloads (Pure)

Environmentally friendly tribo-systems in bulk metal forming

Bay, N. (Invited author), Nakamura, T. (Invited author), Ishibashi, I. (Invited author), Yoshida, M. (Invited author) & Morishita, M. (Invited author), 2009, New Developments in Forging Technology. Liewald, M. (ed.). Stuttgart: IFU - Institute for Metal Forming Technology, Universität Stuttgart, p. 159-174 309 p.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Experimental validation of viscous and viscoelastic simulations of micro injection molding process

Gava, A., Tosello, G., Lucchetta, G., Hansen, H. N. & Schoth, A., 2009, Proceedings of 67th Annual Technical Conference (ANTEC2009). p. 1781-1786

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Formability in Multistage Single Point Incremental Forming

Skjødt, M., Silva, M. B., Martins, P. A. F. & Bay, N., 2009, Proceed. 7th ESMC2009: The 7th Euromech Solids Mechanics Conference. Ambrósio, J. & Silva, M. T. (eds.). Lisbon, p. 67-68

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Friction Stir Welding of Aluminium Tailored Blanks Processed by Single Point Incremental Forming

Silva, M. B., Skjødt, M., Vilaca, P., Bay, N. & Martins, P. A. F., 2009, Proceedings of the 3rd International Conference on Integrety - Reliability - Failure, Challenges and Opportunities: IRF 2009. p. 599-600

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Improvement of geometrical measurements from 3D-SEM reconstructions

Carli, L. (Invited author), De Chiffre, L. (Invited author), Horsewell, A. (Invited author), Carmignato, S. (Invited author) & Santin, D. (Invited author), 2009, CIRP CAT Conference 2009.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Induction assisted hybrid welding of steel T-joints

Nielsen, J. S. & Olsen, F. O., 2009, 12th NOLAMP proceeding 2009.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Influence of different process settings conditions on the accuracy of micro injection molding simulations: an experimental validation

Tosello, G., Gava, A., Hansen, H. N., Reinecke, H., Lucchetta, G. & Schoth, A., 2009, Proceedings of 67th Annual Technical Conference (ANTEC2009). p. 1787-1793

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Influence of measuring parameters on the accuracy of atomic force microscope in industrial applications

Tosello, G., Antico, A., Hansen, H. N., Marinello, F. & Lucchetta, G., 2009, Proceedings of the 5th International Conference on Multi-Material Micro Manufacture (4M/ICOMM 2009). p. 401-406

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Integration of micro milling highspeed spindle on a microEDM-milling machine set-up

De Grave, A., Hansen, H. N. & Andolfatto, L., 2009, Proceedings of the Global Conference on Micro Manufacture, 4M/ICOMM 2009. p. 355-358

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Investigation on hole manufacture in 42CrMo4 steel using 3-flute carbide drills and 6-flute cermet reamers

Müller, P. (Invited author) & De Chiffre, L. (Invited author), 2009, SPS09. p. 438-446

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

LASER INDUCED SELECTIVE ACTIVATION UTILIZING AUTO-CATALYTIC ELECTROLESS PLATING ON POLYMER SURFACE

Zhang, Y., Nielsen, J. S., Tang, P. T. & Hansen, H. N., 2009, LASER INDUCED SELECTIVE ACTIVATION UTILIZING AUTO-CATALYTIC ELECTROLESS PLATING ON POLYMER SURFACE.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Low-loss and bendable THz fiber with tailored dispersion

Nielsen, K., Rasmussen, H. K., Adam, A. J. L., Planken, P. C. M., Bang, O. & Jepsen, P. U., 2009, Proceedings of the Conference on Lasers and Electro-Optics. IEEE, p. 1-2

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Open Access

File

498 Downloads (Pure)

Mechanical properties test and microstructure analysis of polyoxymethylene (POM) micro injection moulded standard parts

Tosello, G., Lucchetta, G., Hansen, H. N., Gava, A. & Paliuri, S., 2009, Proceedings of the 5th International Conference on Multi-Material Micro Manufacture (4M/ICOMM 2009). p. 231-235

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Manufacturing Engineering

Publications

Search results