Manufacturing Engineering

Publications

Publications per year 1977 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2023

• 868 Journal article
• 476 Article in proceedings
• 161 Conference article
• 107 Conference abstract for conference
• 444 More
  • 88 Conference abstract in proceedings
  • 66 Report
  • 66 Ph.D. thesis
  • 58 Poster
  • 51 Book chapter
  • 48 Paper
  • 17 Book
  • 11 Sound/Visual production (digital)
  • 11 Patent
  • 9 Review
  • 6 Editorial
  • 6 Net publication - Internet publication
  • 4 Conference abstract in journal
  • 2 Comment/debate
  • 1 Letter

Publications per year

Publications per year

Search results

• 2023

  Computational Fluid Dynamics Modelling and Experimental Analysis of Material Extrusion Additive Manufacturing

  Mollah, M. T., 2023, Kgs. Lyngby: Technical University of Denmark. 147 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Three Dimensional Printing 100%
  • Material 100%
  • Extrusion 100%
  • Computational Fluid Dynamics 100%
  • Yield Stress 50%
  106 Downloads (Pure)

• Design of metallic powders for additive manufacturing From scrap to resource

  Cardenas del Rio, D., 2023, Technical University of Denmark. 145 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Additive Manufacturing 100%
  • Metallic Powder 100%
  • Design 100%
  • Three Dimensional Printing 100%
  • Powder 100%
  7 Downloads (Pure)

• Sub-Micrometer 3D Printing with 3D Ice Lithography

  Waafi, A. K., 2023, Kgs. Lyngby: Technical University of Denmark. 110 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Lithography 100%
  • Ice 100%
  • 3D Printing 100%
  • Three Dimensional Printing 100%
  • Structure 84%
  21 Downloads (Pure)
• 2022

  3D mapping of local residual stresses using laboratory X-rays

  Lindkvist, A. A., 2022, Kgs. Lyngby: Technical University of Denmark. 120 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File
  23 Downloads (Pure)

• Contact mechanics in metal forming tool-workpiece interfaces with and without lubrication

  Zwicker, M. F. R., 2022, Kgs. Lyngby: Technical University of Denmark. 200 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Metal Forming 100%
  • Forming Tool 100%
  • Asperity 100%
  • Contact Mechanics 100%
  • Lubrication 100%
  45 Downloads (Pure)

• Industry 4.0 Digital Technologies for High Added Value Zero Defect Manufacturing: Application of metal additive manufacturing in the field of polymer profile extrusion

  Kain, M., 2022, Kgs. Lyngby: Technical University of Denmark. 229 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Defects 100%
  • Additive Manufacturing 100%
  • Technology 100%
  • Utilization 100%
  • Value 100%
  22 Downloads (Pure)
• 2021

  Design, Optimization and Production of Smart Surfaces by Additive Manufacturing for Medical Applications

  Danielak, A. H., 2021, Kgs. Lyngby: Technical University of Denmark. 266 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Design Optimization 100%
  • Additive Manufacturing 100%
  • Medical Applications 100%
  • Surfaces 100%
  • Production 100%
  316 Downloads (Pure)

• Design for manufacturing and characterization of small-scale turbomachinery impellers

  Geiselhart, M., 2021, Kgs. Lyngby: Technical University of Denmark. 147 p. (DCAMM Special Report; No. S307).

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Rotors 100%
  • Gas Fuel Manufacture 100%
  • Impeller 100%
  • Design 100%
  • Small Scale 100%
  540 Downloads (Pure)

• Digital Twin of Additively Manufactured Components: Enabling Simulation-based Qualification

  Klingaa, C. G., 2021, Kgs. Lyngby: Technical University of Denmark. 317 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Qualification 100%
  • Simulation 100%
  • Qualifications 100%
  • Surface Texture 100%
  • Surfaces 59%
  214 Downloads (Pure)

• Microstructure Optimization of AM metals through heat treatment and interstitial alloying

  Valente, E. H., 2021, Kgs. Lyngby: Technical University of Denmark. 251 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Heat Treatment 100%
  • Alloying 100%
  • Three Dimensional Printing 100%
  • Laser 100%
  • Metal 100%
  138 Downloads (Pure)

• Powder Injection Moulding of Metal and Recycled Tyre Rubber Process and Material Characteristics

  Basso, A., 2021, Kgs. Lyngby: Technical University of Denmark. 269 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Injection Molding 100%
  • Material 100%
  • Powder 100%
  • Metal 100%
  • Rubber 100%
  36 Downloads (Pure)
• 2020

  Integrated process chain for first-time-right mould components production using laser powder bed fusion metal additive manufacturing

  Moshiri, M., 2020, Kgs. Lyngby: Technical University of Denmark. 196 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Process Chain 100%
  • Additive Manufacturing 100%
  • Powder Bed Fusion 100%
  • Production 100%
  • Metal 100%
  131 Downloads (Pure)

• Integration of Micro and Nano Structures on Injection Moulded Devices: Process Chains and Enabling Technologies

  Loaldi, D., 2020, Technical University of Denmark. 271 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File
  417 Downloads (Pure)

• Modeling and Monitoring for Improved quality of Machining Processes: Development and Application of Error Compensation Strategies

  Checchi, A., 2020, Kgs. Lyngby: Technical University of Denmark. 273 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Process Development 100%
  • Machining 100%
  • Error Compensation 100%
  • Compensation Strategy 100%
  • Applications 100%
  40 Downloads (Pure)

• Molded Pulp Products Manufacturing: Process Development, Characterization and Modeling

  Didone, M., 2020, Kgs. Lyngby: Technical University of Denmark. 150 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Process Development 100%
  • Product Manufacturing 100%
  • Production Process 100%
  • Chemical Reaction Product 100%
  • Manufacturing Process 100%
  515 Downloads (Pure)

• Multi-Scale Multiphysics Simulation of the Thermo-Fluid-Metallurgical-Mechanical Conditions During Metal Additive Manufacturing

  Bayat, M., 2020, Kgs. Lyngby: Technical University of Denmark. 245 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Multiscale 100%
  • Additive Manufacturing 100%
  • Simulation 100%
  • Fluid 100%
  • Metal 100%
  478 Downloads (Pure)

• Numerical and Experimental Analysis of Filament-based Material Extrusion Additive Manufacturing

  Serdeczny, M. P., 2020, Technical University of Denmark. 182 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Material Extrusion 100%
  • Additive Manufacturing 100%
  • Strand 100%
  • Filament 100%
  • Extrusion 100%
  719 Downloads (Pure)

• Numerical Modelling of Heat Treatment and Post Processing Following Additive Manufacturing of Metal Parts

  De Baere, D., 2020, Kgs. Lyngby: Technical University of Denmark. 206 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Heat Treatment 100%
  • Additive Manufacturing 100%
  • Models 100%
  • Numerical Modeling 100%
  • Model 100%
  448 Downloads (Pure)

• Numerical Modelling of Material Flow in the Resin-injection Pultrusion Process

  Sandberg, M., 2020, Kgs. Lyngby: Technical University of Denmark. 265 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Material Flow 100%
  • Pultrusion 100%
  • Numerical Modeling 100%
  • Resin 100%
  • Material 100%
  320 Downloads (Pure)

• Open Architecture Laser Power Bed Additive Manufacturing

  Andersen, S. A., 2020, Kgs. Lyngby: Technical University of Denmark. 394 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File
  176 Downloads (Pure)

• Vat Photopolymerization Process Chain

  Mendez Ribo, M., 2020, Kgs. Lyngby: Technical University of Denmark. 214 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Process Chain 100%
  • Photopolymerisation 100%
  • Procedure 100%
  • Photopolymerization 100%
  • Constriction 40%
  610 Downloads (Pure)
• 2019

  Additive Manufacturing of Fiber-Reinforced Polymers

  Hofstätter, T., 2019, Kgs. Lyngby: Technical University of Denmark. 259 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Injection Moulding 100%
  • Fiber-Reinforced Polymer 100%
  • Additive Manufacturing 100%
  • Injection Molding 100%
  • Three Dimensional Printing 100%
  2343 Downloads (Pure)

• High precision tooling for electrical sintering of titanium and permanent magnets

  Cannella, E., 2019, Kgs. Lyngby: Technical University of Denmark. 196 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Permanent Magnet 100%
  • Sintering 100%
  • Tooling 100%
  • Precision 100%
  • Titanium 100%
  110 Downloads (Pure)

• Integrated micro product/process quality assurance in micro injection moulding production

  Baruffi, F., 2019, Kgs. Lyngby: Technical University of Denmark. 205 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Injection Moulding 100%
  • Micro Product 100%
  • Production 100%
  • Procedure 100%
  • Chemical Reaction Product 100%
  223 Downloads (Pure)

• Limits of lubrication in severe stamping operations

  Moghadam, M., 2019, Kgs. Lyngby: Technical University of Denmark. 145 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Stamping 100%
  • Lubrication 100%
  • Lubricant 100%
  • Condition 70%
  • Lubricating Oil 60%
  826 Downloads (Pure)

• Predicting and 3D Printing Material Appearance

  Luongo, A., 2019, Technical University of Denmark. 133 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • 3D Printing 100%
  • Models 100%
  • Rendering 83%
  • Predictive Model 50%
  • Analytical Model 16%
  105 Downloads (Pure)
• 2018

  Advanced Process Chains for Prototyping and Pilot Production based on Direct Rapid Soft Tooling

  Mischkot, M., 2018, Kgs. Lyngby: Technical University of Denmark. 234 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Process Chain 100%
  • Production 100%
  • Procedure 100%
  • Molding 58%
  • Injection Molding 58%
  1960 Downloads (Pure)

• An Off-line Methodology to Determine Limits of Lubrication in Sheet Metal Forming

  Üstünyagiz, E., 2018, Kgs. Lyngby: Technical University of Denmark. 215 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Metal Forming 100%
  • Sheet Metal 100%
  • Determines 100%
  • Lubricant 100%
  • Metal Sheet 100%
  301 Downloads (Pure)
• 2017

  Accurate dimensional measurements in production environment using Dynamic Length Metrology

  Dalla Costa, G., 2017, Kgs. Lyngby: Technical University of Denmark. 224 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Dimensional Measurement 100%
  • Metrology 100%
  • Environment 100%
  • Measurement 100%
  • Production Environment 100%
  351 Downloads (Pure)

• Development and Testing of Tailored Tool Surfaces for Sheet Metal Forming

  Sulaiman, M. H. B., 2017, Kgs. Lyngby: Technical University of Denmark. 165 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Metal Forming 100%
  • Sheet Metal 100%
  • Development 100%
  • Surfaces 100%
  • Testing 100%
  363 Downloads (Pure)

• Graphite nodules and local residual stresses in ductile iron: Thermo-mechanical modelingand experimental validation

  Andriollo, T., 2017, Kgs. Lyngby: Technical University of Denmark. 206 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Graphite Nodule 100%
  • Validation 100%
  • Nodular Iron 100%
  • Graphite 100%
  • Residual Stress 100%
  1182 Downloads (Pure)

• In situ observations of graphite formation during solidification of cast iron

  Bjerre, M. K., 2017, Kgs. Lyngby: Technical University of Denmark. 133 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • In Situ 100%
  • Solidification 100%
  • Graphite 100%
  • Observation 100%
  • Iron 100%
  490 Downloads (Pure)

• Integrated Quality Control of Precision Assemblies using Computed Tomography

  Stolfi, A., 2017, Kgs. Lyngby: Danmarks Tekniske Universitet (DTU). 198 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Tomography 100%
  • Precision 100%
  • Computer Assisted Tomography 100%
  • Accuracy 100%
  • Quality Control 100%
  993 Downloads (Pure)

• Modeling for Dynamic Length Metrology in Accurate Manufacture

  Mohammadi, A., 2017, Kgs. Lyngby: Technical University of Denmark. 166 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Metrology 100%
  • Polymer 100%
  • Length 100%
  • Gas Fuel Manufacture 100%
  • Dimension 92%
  387 Downloads (Pure)

• Multi Scale Micro and Nano Metrology for Advanced Precision Moulding Technologies

  Quagliotti, D., 2017, Technical University of Denmark. 178 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Science and Technology 100%
  • Metrology 100%
  • Precision 100%
  • Procedure 100%
  • Engineering Process 100%
  763 Downloads (Pure)

• Numerical Modelling of Local Climate Inside Electronics Enclosures

  Shojaee Nasirabadi, P., 2017, Kgs. Lyngby: Technical University of Denmark. 192 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Mathematical Model 100%
  • Enclosure 100%
  • Climate 100%
  • Numerical Modeling 100%
  • Relative Humidity 36%
  332 Downloads (Pure)

• Process chains for Advanced Tooling based on Additive Manufacturing

  Biondani, F. G., 2017, Kgs. Lyngby: Technical University of Denmark. 219 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Process Chain 100%
  • Additive Manufacturing 100%
  • Three Dimensional Printing 100%
  • Diamond 100%
  • Surface 80%
  2979 Downloads (Pure)
• 2016

  Design and Manufacture of Molded Micro Products Using Concurrent Engineering

  Marhöfer, D. M., 2016, Kgs. Lyngby: Technical University of Denmark. 345 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Micro Product 100%
  • Concurrent Engineering 100%
  • Gas Fuel Manufacture 100%
  • Design 100%
  • Chemical Reaction Product 100%
  1080 Downloads (Pure)

• Micro Injection Moulding for Micro Fuel Cell Production

  Wöhner, T., 2016, Kgs. Lyngby: Technical University of Denmark. 142 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Injection Moulding 100%
  • Micro Fuel Cell 100%
  • Production 100%
  • Injection Molding 100%
  • Cell 100%
  476 Downloads (Pure)
• 2015

  Drying of water based foundry coatings: Innovative test, process design and optimization methods

  Di Muoio, G. L., 2015, DTU Mechanical Engineering. 320 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Process Design 100%
  • Drying 100%
  • Design Method 100%
  • Optimization Method 100%
  • Coating 100%
  1506 Downloads (Pure)

• Modelling architectures in multi-product oriented technology development

  Guðlaugsson, T. V., 2015, Kgs. Lyngby: Technical University of Denmark. 240 p. (DCAMM Special Report; No. S192).

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Modeling Framework 100%
  • Contexts 80%
  • Application Requirement 60%
  • Technology Architecture 60%
  • Models 40%
  359 Downloads (Pure)

• Numerical simulation of viscoelastic free‐surface flows using a streamfunction/log‐conformation formulation and the volume‐of‐fluid method

  Comminal, R. B., 2015, Kgs. Lyngby: Department of Energy Conversion and Storage, Technical University of Denmark. 234 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Formulation 100%
  • Simulation 100%
  • Computer Simulation 100%
  • Streamfunctions 100%
  • Procedure 100%
  2413 Downloads (Pure)

• Process monitoring for intelligent manufacturing processes - Methodology and application to Robot Assisted Polishing

  Pilny, L., 2015, Kgs. Lyngby: Danmarks Tekniske Universitet (DTU). 296 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Applications 100%
  • Production Process 100%
  • Robot 100%
  • Procedure 100%
  • Application 100%
  579 Downloads (Pure)

• Spot Feeding Spheroidal Graphite Iron with Exothermic and Insulating Ram-Up Sleeves in Vertically Parted Moulds: Efficiency, Microstructure, Dimensional Accuracy, Deformation, and Driving Force and Feeding Criteria Identification

  Vedel-Smith, N. K., 2015, Kgs. Lyngby: Technical University of Denmark. 346 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Microstructure 100%
  • Deformation 100%
  • Driving Force 100%
  • Dimensional Accuracy 100%
  • Spheroidal 100%
  186 Downloads (Pure)
• 2014

  High Performance Transfer Press for Precision Manufacturing of Micro Metal Parts: Micro Forming Technology, Precision Engineering

  Mahshid, R., 2014, Kgs. Lyngby: Technical University of Denmark. 152 p.

  Research output: Book/Report › Ph.D. thesis

  • Forming 100%
  • Micropart 100%
  • Precision Manufacturing 100%
  • Forming Technology 100%
  • Performance 100%

• Modelling of defects in ingot forging: with the finite element flow formulation

  Christiansen, P., 2014, Kgs. Lyngby: Technical University of Denmark. 269 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Elements 100%
  • Defects 100%
  • Lower Die 100%
  • Die Angle 86%
  • Damage Criterion 33%
  308 Downloads (Pure)

• Modelling the deformation process of flexible stamps for nanoimprint lithography

  Sonne, M. R., 2014, Kgs. Lyngby: Technical University of Denmark. 267 p.

  Research output: Book/Report › Ph.D. thesis

  • Deformation Process 100%
  • Nanoimprint Lithography 100%
  • Deformation 100%
  • Lithography 100%
  • Model 100%

• Process chain validation in micro and nano replication

  Calaon, M., 2014, Kgs. Lyngby: Technical University of Denmark. 210 p.

  Research output: Book/Report › Ph.D. thesis

  • Process Chain 100%
  • Validation 100%
  • Procedure 100%
  • Nickel 85%
  • Structure 71%

• Quality assurance of CT scanning for industrial applications

  Angel, J. A. B., 2014, DTU Mechanical Engineering. 181 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Computed Tomography 100%
  • Application 100%
  • Industrial Application 100%
  • Quality Assurance 100%
  • Computer Assisted Tomography 100%
  1498 Downloads (Pure)
• 2013

  3D Modeling and Testing of Contact Problems in Resistance Welding

  Nielsen, C. V. & Zhang, W., 2013, Kgs. Lyngby: Technical University of Denmark. 236 p.

  Research output: Book/Report › Ph.D. thesis

  Open Access

  File

  • Resistance Welding 100%
  • Contact Problem 100%
  • Testing 100%
  • Simulation 100%
  • Welding 100%
  1874 Downloads (Pure)