Manufacturing Engineering

Publications

Publications per year 1977 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2023

• 868 Journal article
• 476 Article in proceedings
• 161 Conference article
• 107 Conference abstract for conference
• 444 More
  • 88 Conference abstract in proceedings
  • 66 Report
  • 66 Ph.D. thesis
  • 58 Poster
  • 51 Book chapter
  • 48 Paper
  • 17 Book
  • 11 Sound/Visual production (digital)
  • 11 Patent
  • 9 Review
  • 6 Editorial
  • 6 Net publication - Internet publication
  • 4 Conference abstract in journal
  • 2 Comment/debate
  • 1 Letter

Publications per year

Publications per year

Search results

• 2019

  Numerical Modelling of Heat Transfer using the 3D-ADI-DG Method - with Application for Pultrusion. Technical report

  Rasmussen, F. S., Klingaa, C. G., Sonne, M. R. & Hattel, J. H., 2019, Kgs. Lyngby: Technical University of Denmark. 10 p.

  Research output: Book/Report › Report › Research

  Open Access

  File

  • Pultrusion 100%
  • Heat Transfer 100%
  • Technical Report 100%
  • Application 100%
  • Volume Fraction 33%
  258 Downloads (Pure)
• 2017

  Shot peening speed measurements using lidar technology

  Angelou, N., Zhang, X., Sjöholm, M., Lorentzen, L. & Huang, X., 2017, DTU Wind Energy. 83 p. (DTU Wind Energy E, Vol. 151).

  Research output: Book/Report › Report › Research › peer-review

  Open Access

  File

  • Science and Technology 100%
  • Optical Radar 100%
  • Peening 100%
  • Speed 100%
  • Wind Turbine 100%
  371 Downloads (Pure)

• State-of-the-art on Computed Tomography and assembly verification

  Stolfi, A., 2017, 53 p.

  Research output: Book/Report › Report › Research
• 2016

  InteraqCT Comparison on Assemblies - Final Report

  Stolfi, A. & De Chiffre, L., 2016, 74 p.

  Research output: Book/Report › Report › Research

  Open Access

  File

  • Comparison 100%
  • Report 100%
  • Approach 83%
  • Agreement 83%
  • Sample 66%
  274 Downloads (Pure)

• InteraqCT Comparison on Assemblies - Reference Measurements

  Stolfi, A. & De Chiffre, L., 2016, 135 p.

  Research output: Book/Report › Report › Research

  • References 100%
  • Measurement 100%
  • Researcher 100%
  • Research Worker 50%
  • Framework Program 50%

• InteraqCT Comparison on Assemblies - Technical Protocol

  Stolfi, A. & De Chiffre, L., 2016, 16 p.

  Research output: Book/Report › Report › Research

  • Research Worker 100%
  • Framework Program 100%
  • Networks 100%
  • Control 100%
  • European Commission 100%

• MetAMMI - Metrology for additively manufactured medical implants: Task 1.1.3 “Requirements for the design and the manufacture of medical implants and guides made of polymers"

  Stolfi, A. & De Chiffre, L., 2016, 23 p.

  Research output: Book/Report › Report › Research
• 2015

  Calibration and Metrology for Micro/Nano Dimensional Quality Control. D3.5. High Precision Micro Production Technologies - Collaborative project - Small or medium-scale focused research. 1.10.2012 – 30.9.2015

  Quagliotti, D., Tosello, G., Agour, M., Flosky, C., Meier, A., Riemer, O. & Dormann, B., 2015, Hi-Micro project. 36 p.

  Research output: Book/Report › Report › Research

• D1.1 Product/Tool/Process Simulation Report for PoT Components: High Precision Micro Production Technologies Collaborative project - Small or medium-scale focused research project1.10.2012 – 30.9.2015

  Marhöfer, M., Tosello, G., Islam, A., Wilson, S., Brask, A., Kanaris, A., Marson, S., Neal, G., van Eijk, J., van Eijk, J., Qian, J., Ziedler, H., Martin, A., Brandao, C., Riemer, O., Brandao, C., Kuschel, S., Geilert, P. & Vogelsang, A., 2015, Hi-Micro project. 26 p.

  Research output: Book/Report › Report › Research

• D1.3 Standardized micro moulding simulation procedure and tolerance guidelines: High Precision Micro Production Technologies Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Marhöfer, M., Tosello, G., Islam, A. & Giannekas, N., 2015, Hi-Micro project. 61 p.

  Research output: Book/Report › Report › Research

• D 1.3 Standardized micro moulding simulation procedure and tolerance guidelines: High Precision Micro Production Technologies Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Giannekas, N., Islam, A., Marhöfer, M. & Tosello, G., 2015, Hi-Micro project. 3 p.

  Research output: Book/Report › Report › Research

• D4.3 System integration technologies for Hi-Micro production platform with in-line quality control: High Precision Micro Production TechnologiesCollaborative project -Small or medium-scale focused research project 1.10.2012 –30.9.2015

  Giannekas, N. & Tosello, G., 2015, Hi-Micro project. 3 p.

  Research output: Book/Report › Report › Research

• D5.3 Production and Validation of Hi-Micro Demonstrators: High Precision Micro Production Technologies Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Giannekas, N., Marhöfer, M., Tosello, G., Homann, L. & Wilson, S., 2015, Hi-Micro project. 4 p.

  Research output: Book/Report › Report › Research

• High Precision Micro Production Technologies - MS12 Handling concepts for all micro part demonstrators are available: High Precision Micro Production Technologies Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Marhöfer, M. & Wilson, S., 2015, Hi-Micro project. 20 p.

  Research output: Book/Report › Report › Research
• 2014

  Centre for Industrial Application of CT scanning (CIA-CT) – Four years of results 2009-2013

  De Chiffre, L., Andreasen, J. L., Christensen, L. B., Feidenhans'l, R. K., Vinter, B., Thestrup Jensen, N., Arentoft, M., Buchard Jørgensen, P., Vester-Christensen, M. & Schmidt, P. R., 2014, Technical University of Denmark. Department of Mechanical Engineering. 37 p.

  Research output: Book/Report › Report › Research

  Open Access

  File

  • Application 100%
  • Scanning 100%
  • Computed Tomography 100%
  • Project 62%
  • Collaboration 37%
  2098 Downloads (Pure)

• Evaluation of the DeepWind concept

  Schmidt Paulsen, U., Borg, M., Gonzales Seabra, L. A., Verelst, D. R., Aagaard Madsen, H., Friis Pedersen, T., Nielsen, P. H., Schløer, S., Smadja, C., Hattel, J. H., Carstensen, S., Kragh, K. A., Baran, I., van Bussel, G., Fereira, C., Ritchie, E., Leban, K., Svendsen, H., Svenstrup Petersen, O., Berthelsen, P. A., & 4 othersde Ridder, E-J., Battis, L., He, W. & Veers, P., 2014, DTU Wind Energy. 26 p.

  Research output: Book/Report › Report › Research › peer-review

  • Evaluation 100%
  • Science and Technology 50%
  • European Commission 50%
  • United States of America 50%
  • Cost 50%

• Inter laboratory comparison on Computed Tomography for industrial applications in the slaughterhouses: CIA-CT comparison

  Angel, J. A. B., Christensen, L. B., Cantatore, A. & De Chiffre, L., 2014, 76 p. (CIA-CT Technical Report).

  Research output: Book/Report › Report › Research

  Open Access

  File

  • Laboratory 100%
  • Phantom 100%
  • Computer Assisted Tomography 100%
  • Computed Tomography 100%
  • Measurement 63%
  669 Downloads (Pure)

• Micro Insert Moulding for the Production of 8 Pin RIC Socket for Hearing Aid Applications

  Islam, A., Hansen, H. N. & Larsen, J. W., 2014, Technical University of Denmark. 30 p.

  Research output: Book/Report › Report › Research

  • Receiver 100%
  • Utilization 100%
  • Insert 100%
  • Canal 100%
  • Hearing 100%
• 2013

  Handbook of LDS MID

  Islam, A. & Risager, F., 2013, Sonion. 34 p.

  Research output: Book/Report › Report › Research

• Inter laboratory comparison on Industrial Computed Tomography: CIA-CT comparison. Final Report

  Angel, J. A. B. & De Chiffre, L., 2013, DTU Mechanical Engineering. 75 p. (CIA-CT Final Report; No. 01).

  Research output: Book/Report › Report › Research

  Open Access

  File

  • Tomography 100%
  • Interlaboratory Comparison 100%
  • Comparison 100%
  • Report 100%
  • Laboratory 100%
  2076 Downloads (Pure)

• Inter laboratory comparison on Industrial Computed Tomography: CIA-CT comparison. Reference Measurements

  Angel, J. A. B., De Chiffre, L., Larsen, E., Rasmussen, J. & Sobiecki, R., 2013, DTU Mechanical Engineering. 86 p. (CIA-CT Reference Measurements; No. 01).

  Research output: Book/Report › Report › Research

  Open Access

  File
  529 Downloads (Pure)

• Manufacturing-Oriented Product Design. MS3 - Definition of WP1 RTD requirements: Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Tosello, G., Marhöfer, D. M. & Islam, A., 2013, Hi-Micro project. 17 p.

  Research output: Book/Report › Report › Research

• Manufacturing-Oriented Product Design. MS6 - Micro Moulding Simulation Standard Procedure: Collaborative project - Small or medium-scale focused research project 1.10.2012 – 30.9.2015

  Tosello, G., Marhöfer, D. M. & Islam, A., 2013, Hi-Micro project. 17 p.

  Research output: Book/Report › Report › Research

• Preliminary format design guidelines: PolyNano Project, Report Milestone 6.3.2, (WP6 Process Chain Validation, Task 6.3 Specifications for OEM service)

  Tosello, G., Calaon, M., Nørregaard, J. & Hansen, H. N., 2013, 12 p.

  Research output: Book/Report › Report › Research › peer-review

  • Fabrication 100%
  • Process Chain 100%
  • Design Guideline 100%
  • Tasks 100%
  • Validation 100%

• Process validation and standardization: PolyNano Project Report Milestone 6.2.2 (WP6 Process Chain Validation, Task 6.2 standards)

  Calaon, M., Tosello, G. & Hansen, H. N., 2013, 24 p.

  Research output: Book/Report › Report › Research

• Replication fidelity at μm-nm scale: PolyNano Project Report Milestone 6.3.1 (WP6 Process Chain Validation, Task 6.1 Metrology and inspection)

  Calaon, M., Tosello, G. & Hansen, H. N., 2013, 14 p.

  Research output: Book/Report › Report › Research

• Report on final demonstrator production and validation: Converging technologies for micro systems manufacturing. Deliverable D7.3.5

  Islam, A., 2013, 167 p.

  Research output: Book/Report › Report › Research
• 2012

  Demonstrator realization with basic process: COTECH Deliverable 7.2.1 (CP-IP 214491-2)

  Islam, A. & Albertin, T., 2012, Vienna: COTECH. 62 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

• Inter laboratory comparison of industrial CT scanners: CIA-CT audit. Final report

  Angel, J. A. B., Cantatore, A. & De Chiffre, L., 2012, 52 p.

  Research output: Book/Report › Report › Research

  Open Access

  File

  • Polymer 100%
  • Laboratory 100%
  • Clinical Audit 100%
  • Computed Tomography Scanner 100%
  • Computed Tomography 100%
  442 Downloads (Pure)

• Inter laboratory comparison on Industrial Computed Tomography: CIA-CT comparison. Technical Protocol

  Angel, J. A. B., De Chiffre, L., Larsen, E. & Rasmussen, J., 2012, DTU Mechanical Engineering. 12 p.

  Research output: Book/Report › Report › Research

  • Tomography 100%
  • Interlaboratory Comparison 100%
  • Comparison 100%
  • Protocol 100%
  • Laboratories 100%

• Measurement capability overview in PolyNano: Final

  Calaon, M., Tosello, G. & Hansen, H. N., 2012, 16 p. (Technical Report of DSF (Danish Council for Strategic Research) Project PolyNano).

  Research output: Book/Report › Report › Research

  • Measurement 100%
  • Nanometrology 50%
  • Measuring Range 25%
  • Measuring Method 25%
  • Product Quality 25%

• PolyNano M.6.1.1 Process validation state-of-the-art: Final

  Tosello, G., Hansen, H. N. & Calaon, M., 2012, 44 p. (Technical Report of DSF (Danish Council for Strategic Research) Project PolyNano).

  Research output: Book/Report › Report › Research › peer-review

  • Process Validation 100%
  • Surfaces 100%
  • Validation Process 100%
  • Process Chain 75%
  • Research 75%

• PolyNano M6.2.1 First generation process finger print – design, test and validation: Draft.

  Calaon, M., Hansen, H. N. & Tosello, G., 2012, 11 p. (Technical Report of DSF (Danish Council for Strategic Research) Project PolyNano).

  Research output: Book/Report › Report › Research

  • Design 100%
  • Validation 100%
  • Generation 100%
  • Lithography 100%
  • Atomic Force Microscopy 66%

• Prototypes realization with high-risk process: Draft. COTECH deliverable D7.2.3 (CP-IP 214491-2)

  Islam, A. & Garcia, I., 2012, COTECH. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

• Prototypes realization with medium-risk process: COTECH Deliverables D7.2.2 (CP-IP 214491-2)

  Islam, A., 2012, COTECH. 95 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

• Report on prototypes characterization basic process: COTECH Deliverable 7.3.1 (CP-IP 214491-2)

  Islam, A. & Esmoris, J. I., 2012, Vienna: COTECH. 58 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  2 Downloads (Pure)

• Report on prototypes characterization medium-risk process, COTECH D7.3.2: Draft. COTECH Deliverable 7.3.2 (CP-IP 214491-2)

  Islam, A. & Staemmler, L., 2012, COTECH. 54 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

• Report on prototypes characterization medium-risk process, COTECH D7.3.3: Final. COTECH Deliverable 7.3.3 (CP-IP 214491-2)

  Padovani, S. & Islam, A., 2012, COTECH. 63 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  1 Downloads (Pure)
• 2011

  Advanced free-form micro tooling: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

  Tosello, G. & Gavillet, J., 2011, 21 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  • Nickel 100%
  • Electroplating 50%
  • Surfaces 50%
  • Lithography 50%
  • Patterning 33%

• Demonstrator desing for high risk process: COTECH Deliverable 7.1.3 (CP-IP 214491-2)

  Islam, A., 2011, Vienna: COTECH. 49 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

• Geometrical metrology on vacuum cast silicone rubber form using computed tomography

  Pacurar, R., Müller, P. & De Chiffre, L., 2011, DTU Mechanical Engineering. 68 p.

  Research output: Book/Report › Report › Research › peer-review

  File

  • Tomography 100%
  • Metrology 100%
  • Silicone Rubber 100%
  • Shape 100%
  • Vacuum 100%
  551 Downloads (Pure)

• Introduction to computed tomography

  Cantatore, A. & Müller, P., 2011, Kgs.Lyngby: DTU Mechanical Engineering. 76 p.

  Research output: Book/Report › Report › Research

  Open Access

  File
  47994 Downloads (Pure)

• Reference micro-objects and procedures to establish traceability in micro metrology: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

  Gasparin, S., Tosello, G., Hansen, H. N. & Prantl, M., 2011, 44 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  • Measurement 100%
  • Procedures 100%
  • References 100%
  • Artifact 50%
  • Ensure 50%

• Report on condition and monitoring platform for effective process control techniques: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

  Tosello, G. & Griffiths, C., 2011, 93 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  • Gas Fuel Manufacture 100%
  • Process Control 100%
  • Process Chain 75%
  • Tooling 75%
  • Polymer 25%

• Report on design rules of μ-tools for hybrid tooling: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

  Esmoris, J. I., Azcarate, S., Tosello, G., Bissacco, G., Quadroni, A. & Griffiths, C., 2011, 60 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  • Design Rule 100%
  • Gas Fuel Manufacture 100%
  • Hybrid 100%
  • Tooling 100%
  • Design 100%

• Report on design rules of μ-tools for standard insert: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

  Tosello, G., Esmoris, J. I. & Quadroni, A., 2011, 63 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  • Design Rule 100%
  • Gas Fuel Manufacture 100%
  • Process Chain 75%
  • Polymer 25%
  • Injection Moulding 25%

• Report on experimental research and best practice for surface treatment solutions: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

  Gavillet, J., Tosello, G. & Gasparin, S., 2011, 27 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  • Surface Treatment 100%
  • Research 100%
  • Project 100%
  • Report 100%
  • Agreement 100%

• Report on tolerancing guidelines for micro manufacturing: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

  Gasparin, S., Tosello, G. & Hansen, H. N., 2011, 50 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  • Gas Fuel Manufacture 100%
  • Guideline 100%
  • Hearing Aid 100%
  • Applications 50%
  • Lenses 50%

• Reproducibility of surface roughness in reaming

  Müller, P. & De Chiffre, L., 2011, DTU Mechanical Engineering. 270 p.

  Research output: Book/Report › Report › Research › peer-review

  Open Access

  File

  • Reaming 100%
  • Surfaces 100%
  • Roughness 100%
  • Surface Roughness 100%
  • Cutting 100%
  281 Downloads (Pure)
• 2010

  Report on best practice for improved μ-IM injection moulding simulation: Final. COTECH EU FP7 Integrated Project (Grant Agreement no.: CP-IP 214491-2)

  Tosello, G., Costa, F. & Hansen, H. N., 2010, 100 p. (COnverging TECHnologies for micro systems manufacturing).

  Research output: Book/Report › Report › Research › peer-review

  • Injection Moulding 100%
  • Simulation 100%
  • Molding 50%
  • Injection Pressure 25%
  • Heat Transfer Coefficient 25%