• Matematiktorvet, 303 B

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

Filter
Conference abstract in proceedings
2018

Automated contact area measurement on structured surfaces

Kücükyildiz, Ö. C., Jensen, S. H. N. & De Chiffre, L., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 473-474

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
34 Downloads (Pure)

Combined uncertainty and scenario analysis within Life Cycle Assessment of waste management systems

Bisinella, V., Conradsen, K., Christensen, T. H. & Astrup, T. F., 2018, SETAC Europe 28th Annual Meeting - abstract book. Brussels, Belgium: Society of Environmental Toxicology and Chemistry, p. 5-5 15

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
221 Downloads (Pure)

Computer vision for focus calibration of photo-polymerization systems

Ingwersen, C. K., Mortensen, H. L., Ribo, M. M., Danielak, A. H., Eiríksson, E. R., Nielsen, A. A. & Pedersen, D. B., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 89-91

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Effects of subsurface scattering on the accuracy of optical 3D measurements using miniature polymer step gauges

Wilm, J., Madruga, D. G., Jensen, J. N., Gregersen, S. K. S., Doest, M. E. B., Guerra, M. G., Aanæs, H. & De Chiffre, L., 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology. Billington, D., Leach, R. K., Phillips, D., Riemer, O. & Savio, E. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 449-450

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

1 Downloads (Pure)

Intensity Mapping for Mask Projection based Photopolymerization

Warburg, F., Ribo, M. M., Luongo, A., Danielak, A. H. & Pedersen, D. B., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, p. 92-96

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Life Cycle Assessment of biorefineries: how robust are the results?

Bisinella, V., Conradsen, K., Christensen, T. H. & Astrup, T. F., 2018, Sustain Conference 2018: Creating Technology for a Sustainable Society. C. M. & K. M. (eds.). Lyngby, Denmark: Technical University of Denmark, 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
73 Downloads (Pure)
2017

Geometrical Characterisation of Individual Fibres From X-Ray Tomograms

Emerson, M. J., Dahl, V. A., Mikkelsen, L. P., Dahl, A. B. & Conradsen, K., 2017, Proceedings of the 30th Nordic Seminar on Computational Mechanics (NSCM-30). Høsberg, J. & Pedersen, N. L. (eds.). p. 59 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
79 Downloads (Pure)
2016

Atomic Stretch: Optimally bounded real-time stretching and beyond

Jensen, R. R. & Nielsen, J. B., 2016, Proceeding of the 9th SIGGRAPH ASIA 2016. Association for Computing Machinery, 2 p. 10

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

2015

Markerless PET motion correction: tracking in narrow gantries through optical fibers

Jensen, R. R., Olesen, O. V., Benjaminsen, C., Højgaard, L. & Larsen, R., 2015, IEEE Nuclear Science Symposium Conference Record (NSS/MIC) 2014. IEEE, 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

File
171 Downloads (Pure)

Predicting Color Output of Additive Manufactured Parts

Eiríksson, E. R., Pedersen, D. B. & Aanæs, H., 2015, Proceedings of Achieving Precision Tolerances in Additive Manufacturing: ASPE Spring Topical Meeting. ASPE – The American Society for Precision Engineering, Vol. 60. p. 95-99

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
243 Downloads (Pure)

Quantifying uncertainty in sustainability assessments: from feedstock to end-of-life

Bisinella, V., Conradsen, K., Damgaard, A., Christensen, T. H. & Astrup, T. F., 2015, Book of Abstracts. DTU's Sustain Conference 2015. Technical University of Denmark, 1 p. A-14

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
135 Downloads (Pure)

Spatial Accuracy of Embedded Surface Coloring in Color 3D Printing

Pedersen, D. B., Hansen, H. N. & Eiríksson, E. R., 2015, Proceedings of Achieving Precision Tolerances in Additive Manufacturing: ASPE Spring Topical Meeting. ASPE – The American Society for Precision Engineering, Vol. 60. p. 147-150

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
306 Downloads (Pure)

VirtualTable: a projection augmented reality game

Dal Corso, A., Olsen, M. D., Steenstrup, K. H., Wilm, J., Jensen, S. H. N., Paulsen, R. R., Eiríksson, E. R., Nielsen, J. B., Frisvad, J. R., Einarsson, G. & Kjer, H. M., 2015, Proceedings of SIGGRAPH Asia 2015 Posters. Association for Computing Machinery, 1 p. 40

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
470 Downloads (Pure)
2014

Addressing Grazing Angle Reflections in Phong Models

Nielsen, J. B., Frisvad, J. R., Conradsen, K. & Aanæs, H., 2014, Proceedings of SIGGRAPH Asia 2014 Posters. Association for Computing Machinery, 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Shape modelling of the inner ear from micro-CT data

Kjer, H. M., Fagertun, J., Vera, S., González Ballester, M. A. & Paulsen, R. R., 2014, Proceedings of Symposium on Statistical Shape Models & Applications, Shape 2014. p. 21 015

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
194 Downloads (Pure)
2013

Online Multi-Spectral Meat Inspection

Nielsen, J. B. & Larsen, A. B. L., 2013, Workshop on Farm Animal and Food Quality Imaging 2013: Espoo, Finland, June 17, 2013, Proceedings. Kgs. Lyngby: Technical University of Denmark, p. 57 1 p. (DTU Compute-Technical Report-2013; No. 12).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
97 Downloads (Pure)

Pond of Illusion: Interacting through Mixed Reality

Nobel-Jørgensen, M., Nielsen, J. B., Larsen, A. B. L., Olsen, M. D., Frisvad, J. R. & Bærentzen, J. A., 2013, Proceedings of SIGGRAPH Asia 2013 Posters. Association for Computing Machinery, 1 p. 26

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review