Engineering Design and Product Development

  • Produktionstorvet, 426, 154

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

2020

A Functional Failure Analysis Method of Identifying and Mitigating Spurious System Emissions From a System of Interest in a System of Systems

Van Bossuyt, D. L. & Arlitt, R. M., 2020, In : Journal of Computing and Information Science in Engineering. 20, 5, 8 p., 054501.

Research output: Contribution to journalJournal articleResearchpeer-review

An online community-based dynamic customisation model: the trade-off between customer satisfaction and enterprise profit

Wang, Y., Wu, J., Lin, L. & Shafiee, S., 2020, (Accepted/In press) In : International Journal of Production Research.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
64 Downloads (Pure)

Assessment of the impact of inventory optimization drivers in a multi-echelon supply chain: Case of a toy manufacturer

Chinello, E., Herbert-Hansen, Z. N. L. & Khalid, W., 2020, In : Computers & Industrial Engineering. 141, 22 p., 106232.

Research output: Contribution to journalJournal articleResearchpeer-review

A “User-Knowledge-Product” Co-Creation Cyberspace Model for Product Innovation

Wang, Y., Wu, J., Zhang, R., Shafiee, S. & Li, C., 2020, In : Complexity. 2020, 20 p., 7190169.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
53 Downloads (Pure)

Barriers for virtual assessment of structural robustness

Nerenst, T. B., Ebro, M., Nielsen, M., Eifler, T. & Nielsen, K. L., 2020, Conference Proceedings - International Mechanical Engineering Congress & Exposition. American Society of Mechanical Engineers, Vol. 2B: Advanced Manufacturing. 10 p. IMECE2019-11251

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
205 Downloads (Pure)
Open Access
File
218 Downloads (Pure)

Circular Product Design and Development: CIRCit Workbook 3

Shahbazi, S., Jönbrink, A. K., Jensen, T. H., Pigosso, D. C. A. & McAloone, T. C., 2020, Kgs. Lyngby: Technical University of Denmark. 44 p.

Research output: Book/ReportBookCommunication

Open Access
File
163 Downloads (Pure)

Closing the Loop for a Circular Economy: CIRCit Workbook 5

Hildenbrand, J., Shahbazi, S., Dahlström, J., Jensen, T. H., Pigosso, D. C. A. & McAloone, T. C., 2020, Kgs. Lyngby: Technical University of Denmark. 60 p.

Research output: Book/ReportBookCommunication

Open Access
File
143 Downloads (Pure)

Collaborating and Networking for a Circular Economy: CIRCit Workbook 6

Blomsma, F., Jensen, T. H., Pigosso, D. C. A. & McAloone, T. C., 2020, Kgs. Lyngby: Technical University of Denmark. 64 p.

Research output: Book/ReportBookCommunication

Open Access
File
134 Downloads (Pure)

Deciding on the total number of product architectures

Askhøj, C. & Mortensen, N. H., 2020, In : Concurrent Engineering: Research and Applications. 28, 1, p. 20-31

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
43 Downloads (Pure)

Dynamic business modeling for sustainability: Exploring a system dynamics perspective to develop sustainable business models

Cosenz, F., Rodrigues, V. P. & Rosati, F., 2020, In : Business Strategy and the Environment. 29, 2, p. 651-664

Research output: Contribution to journalJournal articleResearchpeer-review

From Idea to Production: A Retrospective and Longitudinal Case Study of Prototypes and Prototyping Strategies

Hansen, C. A. & Ozkil, A. G., 2020, In : Journal of Mechanical Design. 142, 3, 12 p., 031115.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
26 Downloads (Pure)

Guidelines for Structuring Object-Oriented Product Configuration Models in Standard Configuration Software

Rasmussen, J. B., Hvam, L., Kristjansdottir, K. & Mortensen, N. H., 2020, In : Journal of Universal Computer Science. 26, 3, p. 374-401

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
16 Downloads (Pure)

Modularisation strategies in the AEC industry: a comparative analysis

Shafiee, S., Piroozfar, P., Hvam, L., Farr, E. R. P., Huang, G. Q., Pan, W., Kudsk, A., Rasmussen, J. B. & Korell, M., 2020, (Accepted/In press) In : Architectural Engineering and Design Management.

Research output: Contribution to journalJournal articleResearchpeer-review

Optoelectronic optimization of graded-bandgap thin-film AlGaAs solar cells

Ahmad, F., Lakhtakia, A. & Monk, P. B., 2020, In : Applied Optics. 59, 4, p. 1018-1027

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
22 Downloads (Pure)

Product behavior complexity metric for early prioritization of tolerance analysis tasks

Bjarklev, K., Eifler, T., Mortensen, N. H., Linnebjerg, S. & Ebro, M., 2020, In : Design Science. 6, 25 p., e1.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
44 Downloads (Pure)

Smart Circular Economy: CIRCit Workbook 4

Kristoffersen, E., Li, Z., Li, J., Jensen, T. H., Pigosso, D. C. A. & McAloone, T. C., 2020, Kgs. Lyngby: Technical University of Denmark. 44 p.

Research output: Book/ReportBookCommunication

Open Access
File
195 Downloads (Pure)

Theory of Dyakonov–Tamm surface waves featuring Dyakonov–Tamm–Voigt surface waves

Zhou, C., Mackay, T. G. & Lakhtakia, A., 2020, In : Optik. 211, 13 p., 164575.

Research output: Contribution to journalJournal articleResearchpeer-review

The reduction of product and process complexity based on the quantification of product complexity costs

Hvam, L., Hansen, C. L., Forza, C., Mortensen, N. H. & Haug, A., 2020, In : International Journal of Production Research. 58, 2, p. 350-366

Research output: Contribution to journalJournal articleResearchpeer-review

Towards highly efficient thin-film solar cells with a graded-bandgap CZTSSe layer

Ahmad, F., Lakhtakia, A., Anderson, T. H. & Monk, P. B., 2020, In : Journal of Physics: Energy. 2, 2, 18 p., 025004 .

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
8 Downloads (Pure)

Towards product-service system oriented to circular economy: A systematic review of value proposition design approaches

Fernandes, S. D. C., Pigosso, D. C. A., McAloone, T. C. & Rozenfeld, H., 2020, In : Journal of cleaner production. 257, 16 p., 120507.

Research output: Contribution to journalReviewResearchpeer-review

2019

Achieving long-term modularization benefits: A small- and medium-sized enterprise study

Mortensen, N. H., Bertram, C. A. & Lundgaard, R., 2019, In : Concurrent Engineering: Research and Applications. 27, 1, p. 14-27 14 p.

Research output: Contribution to journalJournal articleResearchpeer-review

A Database Administration Tool to Model the Configuration Projects

Shafiee, S., Friis, S. C., Lis, L., Harlou, U., Wautelet, Y. & Hvam, L., 2019, Proceedings of 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, p. 341-345 5 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A method of identifying and analyzing irrational system behavior in a system of systems

Van Bossuyt, D. L., O'Halloran, B. M. & Arlitt, R. M., 2019, In : Systems Engineering. 22, 6, p. 519-537

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
90 Downloads (Pure)

Application search in solution-driven biologically inspired design

Lenau, T. A., 2019, Proceedings of the Design Society: 22nd International Conference on Engineering Design (ICED19). Wartzack, S. & Schleich, B. (eds.). Cambridge University Press, p. 269-278 (Proceedings of the International Conference on Engineering Design; No. DS94).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
91 Downloads (Pure)

A theoretical foundation for developing a prescriptive method for the co-design of circular economy value chains

Blomsma, F., Pigosso, D. C. & McAloone, T. C., 2019, Proceedings of the 22nd International Conference on Engineering Design (ICED19). Cambridge University Press, Vol. 1. p. 3141-3150 10 p. (Proceedings of the International Conference on Engineering Design; No. 1, Vol. 1).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
43 Downloads (Pure)

Business cases for ecodesign implementation: a simulation-based framework

Rodrigues, V. P., Pigosso, D. C. A. & McAloone, T. C., 2019, In : Journal of Cleaner Production. 234, p. 1045-1058

Research output: Contribution to journalJournal articleResearchpeer-review

Business model innovation for circular economy: integrating literature and practice into a conceptual process model

de Pádua Pieroni, M., McAloone, T. & Pigosso, D., 2019, Proceedings of the Design Society: 22nd International Conference on Engineering Design (ICED19). Wartzack, S. & Schleich, B. (eds.). Cambridge University Press, p. 2517-2526 (Proceedings of the International Conference on Engineering Design; No. DS94).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
192 Downloads (Pure)

Business model innovation for circular economy and sustainability: A review of approaches

Pieroni, M. P., McAloone, T. & Pigosso, D. A. C., 2019, In : Journal of Cleaner Production. 215, p. 198-216

Research output: Contribution to journalJournal articleResearchpeer-review

2 Downloads (Pure)

Can the choice of eco-design principles affect products’ success?

Maccioni, L., Borgianni, Y. & Pigosso, D. C. A., 2019, In : Design Science. 5, 31 p., e25.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
42 Downloads (Pure)

Career adaptability and entrepreneurial behaviour in the K-12 classroom

Neto, R., Rodrigues, V. P., Polega, M. & Persons, M., 2019, In : Teachers and Teaching: Theory and Practice. 25, 1, p. 90-109

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
28 Downloads (Pure)

Challenges of Digital Transformation: The case of the Non-Profit Sector

Shafiee Nahrkhalaji, S., Shafiee, S., Shafiee, M. & Hvam, L., 2019, Proceedings of 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, p. 1245-1249

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
413 Downloads (Pure)

Comparing the Gained Benefits from Product Configuration Systems Based on Maintenance Efforts

Shafiee, S., Hvam, L. & Haug, A., 2019, Proceedings of the 21th International Configuration Workshop. Hotz, L., Aldanondo, M. & Krebs, T. (eds.). University of Hamburg, 5 p. (CEUR Workshop Proceedings).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
38 Downloads (Pure)

Complementing the Scoping Process of Configuration Projects by Design Thinking

Shafiee, S., Haug, A., Shafiee Kristensen, S., Hvam, L. & Mortensen, N. H., 2019, Transdisciplinary Engineering for Complex Socio-technical Systems. Hiekata, K., Moser, B., Inoue, M., Stjepandić, J. & Wognum, N. (eds.). IOS Press, p. 33-42 (Advances in Transdisciplinary Engineering, Vol. 10).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
44 Downloads (Pure)

Configuration platform for customisation of design, manufacturing and assembly processes of building façade systems: A building information modelling perspective

Piroozfar, P., Farr, E. R. P., Hvam, L., Robinson, D. & Shafiee, S., 2019, In : Automation in Construction. 106, 14 p., 102914.

Research output: Contribution to journalJournal articleResearchpeer-review

Configuring new business models for circular economy: from patterns and design options to action

P. P. Pieroni, M., McAloone, T. C. & Pigosso, D. C. A., 2019, Proceedings of the 4th International Conference on New Business Models: New Business Models for Sustainable Entrepreneurship, Innovation, and Transformation. Lüdeke-Freund, F. & Froese, T. (eds.). Europe Business School , p. 74-89

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
230 Downloads (Pure)

Configuring New Business Models for Circular Economy through Product–Service Systems

Pieroni, M. P. P., McAloone, T. C. & Pigosso, D. C. A., 2019, In : Sustainability. 11, 13, 22 p., 3727.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
123 Downloads (Pure)

Designing plastics circulation: electrical and electronic products

Raudaskoski, A., Lenau, T. A., Jokinen, T., Gisslén, A. V. & Metze, A-L., 2019, Copenhagen: Nordic Council of Ministers. 39 p. (TemaNord; No. 534, Vol. 2019).

Research output: Book/ReportReportCommissioned

Open Access
File
221 Downloads (Pure)

Developing a circular strategies framework for manufacturing companies to support circular economy-oriented innovation

Blomsma, F., Pieroni, M., Kravchenko, M., Pigosso, D., Hildenbrand, J., Kristinsdottir, A. R., Kristoffersen, E., Shabazi, S., Nielsen, K. D., Jönbrink, A-K., Li, J., Wiik, C. & McAloone, T. C., 2019, In : Journal of Cleaner Production. 241, 118271.

Research output: Contribution to journalJournal articleResearchpeer-review

Development of a Design- Time Estimation Model for Complex Engineering Processes

Shafiee, S., Herbert-Hansen, Z. N. L., Hvam, L., Haug, A., Bonev, M. & Mortensen, N. H., 2019, Transdisciplinary Engineering for Complex Socio-technical Systems. Hiekata, K., Moser, B., Inoue, M., Stjepandić, J. & Wognum, N. (eds.). IOS Press, p. 301-310 (Advances in Transdisciplinary Engineering, Vol. 10).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
66 Downloads (Pure)

Environmental Lifecycle Hotspots and the Implementation of Eco-design Principles: Does Consistency Pay off?

Borgianni, Y., Maccioni, L. & Pigosso, D., 2019, Sustainable Design and Manufacturing 2019: Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19). Ball, P., Huaccho Huatuco, L., J. Howlett, R. & Setchi, R. (eds.). Springer, Vol. 155. p. 165-176 (Sustainable Design and Manufacturing 2019, Vol. 155).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Evaluating the environmental performance of a product/service-system business model for Merino Wool Next-to-Skin Garments: The case of Armadillo Merino®

Bech, N. M., Birkved, M., Charnley, F., Kjær, L. L., Pigosso, D. C. A., Hauschild, M. Z., McAloone, T. C. & Moreno, M., 2019, In : Sustainability. 11, 20, 21 p., 5854.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
46 Downloads (Pure)

Exploring the Relationship Between Data Science and Circular Economy: An Enhanced CRISP-DM Process Model

Kristoffersen, E., Aremu, O. O., Blomsma, F., Mikalef, P. & Li, J., 2019, Digital Transformation for a Sustainable Society in the 21st Century. I3E 2019. O. Pappas, I., Mikalef, P., K. Dwivedi, Y., Jaccheri, L., Krogstie, J. & Mäntymäki, M. (eds.). Springer, Vol. 11701. p. 177-89 (Lecture Notes in Computer Science, Vol. 11701).

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Feature Engineering for Design Thinking Assessment

Arlitt, R., Khan, S. & Blessing, L., 2019, Proceedings of the Design Society: 22nd International Conference on Engineering Design (ICED19). Wartzack, S. & Schleich, B. (eds.). Cambridge University Press, p. 3891-3900 (Proceedings of the International Conference on Engineering Design; No. DS94).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
44 Downloads (Pure)

Functional Trade-offs in the Mechanical Design of Integrated Products - Impact on Robustness and Optimisability

Sigurdarson, N. S., Eifler, T. & Ebro, M., 2019, Proceedings of the Design Society: 22nd International Conference on Engineering Design (ICED19). Wartzack, S. & Schleich, B. (eds.). Cambridge University Press, p. 3491-3500 (Proceedings of the International Conference on Engineering Design).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
24 Downloads (Pure)

How Does Biologically Inspired Design Cope With Multi-Functionality

Svendsen, N. & Lenau, T. A., 2019, Proceedings of the Design Society: 22nd International Conference on Engineering Design (ICED19). Wartzack, S. & Schleich, B. (eds.). Cambridge University Press, p. 349-358 (Proceedings of the International Conference on Engineering Design; No. DS94).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
105 Downloads (Pure)

Implications of developing a tool for sustainability screening of circular economy initiatives

Kravchenko, M., McAloone, T. C. & Pigosso, D. C. A., 2019, In : Procedia CIRP. 80, p. 625-630

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
113 Downloads (Pure)