Department of Mechanical Engineering

  • Nils Koppels Allé, 404

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

2019

Experimental assessment of the robustness in fire of lightweight ship bulkheads

Hulin, T., Karatzas, V., Mindykowski, P., Jomaas, G., Berggreen, C., Lauridsen, D. & Dragsted, A., 2019, In : Marine Structures. 64, p. 161-173

Research output: Contribution to journalJournal articleResearchpeer-review

Experimental investigation of interfacial crack arrest in sandwich beams subjected to fatigue loading using a novel crack arresting device

Martakos, G., Andreasen, J. H., Berggreen, C. & Thomsen, O. T., 2019, In : Journal of Sandwich Structures and Materials. 2, 2, p. 401–421

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
153 Downloads (Pure)

Experimental Investigation on Power Electronics Cooling by Convective Evaporation of R134a in High Aspect Ratio Copper Microchannels

Criscuolo, G., Kærn, M. R. & Markussen, W. B., 2019, 25th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC 2019) . IEEE, 6 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Experimental testing of Timoshenko predictions of supercritical natural frequencies and mode shapes for free-free beams

Brøns, M. & Thomsen, J. J., 2019, In : Journal of Sound and Vibration. 459, 14 p., 114856.

Research output: Contribution to journalJournal articleResearchpeer-review

Experimental Validation of Transverse Stability Monitoring System for Fishing Vessels

Santiago Caamaño, L., Galeazzi, R., Míguez González, M., Díaz Casás, V. & Nielsen, U. D., 2019, In : IFAC-PapersOnLine. 52, 21, p. 57-63

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
13 Downloads (Pure)

Exploring high strength metallic materials: a lesson from pearlitic steel wire

Zhang, X., 2019, In : I O P Conference Series: Materials Science and Engineering. 580, 1, 6 p., 012058.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
15 Downloads (Pure)

Exploring the Relationship Between Data Science and Circular Economy: An Enhanced CRISP-DM Process Model

Kristoffersen, E., Aremu, O. O., Blomsma, F., Mikalef, P. & Li, J., 2019, Digital Transformation for a Sustainable Society in the 21st Century. I3E 2019. O. Pappas, I., Mikalef, P., K. Dwivedi, Y., Jaccheri, L., Krogstie, J. & Mäntymäki, M. (eds.). Springer, Vol. 11701. p. 177-89 (Lecture Notes in Computer Science, Vol. 11701).

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

Extending the autonomy time of an icelined solar powered vaccine cooler

Jensen, J. K., Busk, C., Cording, C., Pedersen, P. H. & Markussen, W. B., 2019, Proceedings of the 25th IIR International Congress of Refrigeration. International Institute of Refrigeration, 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
30 Downloads (Pure)

Extensional flow dynamics of polystyrene melt

Huang, Q. & Rasmussen, H. K., 2019, In : Journal of Rheology. 63, 5, p. 829-835

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
47 Downloads (Pure)

Externally generated turbulence by a vertically oscillating grid plate and its impact on sediment transport rate

Ojha, S. P., Mazumder, B. S., Carstensen, S. & Fredsøe, J., 2019, In : Coastal Engineering Journal. 64, 4, p. 444-459

Research output: Contribution to journalJournal articleResearchpeer-review

Extreme value predictions using FORM for ship roll motions

Choi, J. H. & Jensen, J. J., 2019, In : Marine Structures. 66, p. 52-65

Research output: Contribution to journalJournal articleResearchpeer-review

Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Davoudinejad, A., Cai, Y., Pedersen, D. B., Luo, X. & Tosello, G., 2019, In : Materials & Design. 176, 11 p., 107839.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
157 Downloads (Pure)

Feature Engineering for Design Thinking Assessment

Arlitt, R., Khan, S. & Blessing, L., 2019, Proceedings of the Design Society: 22nd International Conference on Engineering Design (ICED19). Wartzack, S. & Schleich, B. (eds.). Cambridge University Press, p. 3891-3900 (Proceedings of the International Conference on Engineering Design; No. DS94).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
18 Downloads (Pure)

Fiber segmentation from 3D X-ray computed tomography of composites with continuous textured glass fibre yarns

Rasmussen, F. S., Emerson, M. J., Sonne, M. R., Hattel, J. H., Mikkelsen, L. P. & Dahl, V. A., 2019, Proceedings of 2019 International Conference on Tomography of Materials & Structures. 2 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
63 Downloads (Pure)

Finding Integral Distinguishers with Ease

Eskandari, Z., Kidmose, A. B., Kölbl, S. & Tiessen, T., 1 Jan 2019, Selected Areas in Cryptography – SAC 2018 . Cid, C. & Jacobson, M. J. (eds.). Springer, p. 115-138 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), Vol. 11349 LNCS).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Finite element model coupled with lumped parameter elements

Nielsen, D. G., Jensen, J. S., Cutanda Henriquez, V. & Agerkvist, F. T., 2019, Proceedings of 14th International Conference on Theoretical and Computational Acoustics . 8 p.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
58 Downloads (Pure)

Flexible TwoStage biomass gasifier designs for polygeneration operation

Gadsbøll, R. Ø., Clausen, L. R., Thomsen, T. P., Ahrenfeldt, J. & Henriksen, U. B., 2019, In : Energy. 166, p. 939-950

Research output: Contribution to journalJournal articleResearchpeer-review

FlowCyl: one-parameter cement paste rheology test developed at NTNU, Norway

Cepuritis, R., Skare, E. L., Jacobsen, S., Spangenberg, J., Smeplass, S. & Mørtsell, E., 2019, In : Rheologie. 35, p. 20-24

Research output: Contribution to journalJournal articleResearchpeer-review

Fracture mechanics solutions for interfacial cracks between compressible thin layers and substrates

Massabò, R., Ustinov, K., Barbieri, L. & Berggreen, C., 2019, In : Journal of Coatings Technology and Research. 9, 3, 19 p., 152.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
156 Downloads (Pure)

Frequency detuning effects for a parametric amplifier

Neumeyer, S., Sorokin, V. S., van Gastel, M. H. M. & Thomsen, J. J., 2019, In : Journal of Sound and Vibration. 445, p. 77-87

Research output: Contribution to journalJournal articleResearchpeer-review

Friction Compensation in the Compression Test

Christiansen, P., Martins, P. A. F. & Bay, N., 2019, Manufacturing Engineering Education. Davim, J. P. (ed.). Elsevier, p. 85-104 20 p.

Research output: Chapter in Book/Report/Conference proceedingBook chapterResearchpeer-review

From non-local Eringen’s model to fractional elasticity

Evgrafov, A. & Bellido, J. C., 2019, In : Mathematics and Mechanics of Solids. 24, 6, p. 1935-1953

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
15 Downloads (Pure)

From wood chips to pellets to milled pellets: The mechanical processing pathway of Austrian pine and European beech

Masche, M., Puig-Arnavat, M., Jensen, P. A., Holm, J. K., Clausen, S., Ahrenfeldt, J. & Henriksen, U. B., 2019, In : Powder Technology. 350, p. 134-145

Research output: Contribution to journalJournal articleResearchpeer-review

Full-scale CFD simulation of tsunamis. Part 1: Model validation and run-up

Larsen, B. E. & Fuhrman, D. R., 2019, In : Coastal engineering. 151, p. 22-41

Research output: Contribution to journalJournal articleResearchpeer-review

Full-scale CFD simulation of tsunamis. Part 2: Boundary layers and bed shear stresses

Larsen, B. E. & Fuhrman, D. R., 2019, In : Coastal engineering. 151, p. 42-57

Research output: Contribution to journalJournal articleResearchpeer-review

Fully replicable and automated retention measurement setup for characterization of bio-adhesion

Vaut, L., Scarano, E., Tosello, G. & Boisen, A., 2019, In : HardwareX. 6, 35 p., e00071.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
82 Downloads (Pure)

Functional, Technical and Economical Requirements Integration for Additive Manufacturing Design Education

Bernard, A., Thompson, M. K., Moroni, G., Vaneker, T., Pei, E. & Barlier, C., 2019, Additive Manufacturing—Developments in Training and Education. Pei, E., Monzón, M. & Bernard, A. (eds.). Springer, p. 171-185

Research output: Chapter in Book/Report/Conference proceedingBook chapterEducationpeer-review

Functionality characterization of injection moulded micro-structured surfaces

Regi, F., Doest, M., Loaldi, D., Li, D., Frisvad, J. R., Tosello, G. & Zhang, Y., 2019, In : Precision Engineering. 60, p. 594-601

Research output: Contribution to journalJournal articleResearchpeer-review

Functional Trade-offs in the Mechanical Design of Integrated Products - Impact on Robustness and Optimisability

Sigurdarson, N. S., Eifler, T. & Ebro, M., 2019, Proceedings of the Design Society: 22nd International Conference on Engineering Design (ICED19). Wartzack, S. & Schleich, B. (eds.). Cambridge University Press, p. 3491-3500 (Proceedings of the International Conference on Engineering Design).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
19 Downloads (Pure)

Gap Resonance of Fixed Floating Multi Caissons

Chen, L., He, G., Bingham, H. B. & Shao, Y., 2019, 38th International Conference on Ocean, Offshore & Arctic Engineering. American Society of Mechanical Engineers, Vol. 7A: Ocean Engineering. 9 p. OMAE2019-96383

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

General heat transfer correlations for flow boiling of zeotropic mixtures in horizontal plain tubes

Zhang, J., Mondejar, M. E. & Haglind, F., 2019, In : Applied Thermal Engineering. 150, p. 824-839

Research output: Contribution to journalJournal articleResearchpeer-review

Generalized COP estimation of heat pump processes for operation off the design point of equipment

Ommen, T., Jensen, J. K., Meesenburg, W., Jørgensen, P. H., Pieper, H., Markussen, W. B. & Elmegaard, B., 2019, Proceedings of the 25th IIR International Congress of Refrigeration. International Institute of Refrigeration, 8 p. 648

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
37 Downloads (Pure)

Generalized time scale for wave-induced backfilling beneath submarine pipelines

Bastian, K., Carstensen, S., Sui, T. & Fuhrman, D. R., 2019, In : Coastal engineering. 143, p. 113-122 10 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Geometrical shape assessment of additively manufactured features by Continuous Liquid Interface Production, vat photopolymerization method

Davoudinejad, A., Jessen, A. K., Farahani, S. D., Franke, N., Pedersen, D. B. & Tosello, G., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 116-117

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
22 Downloads (Pure)

Geometric Form of Gating System Elements and Its Influence on the Initial Filling Phase

Dojka, R., Jezierski, J. & Tiedje, N. S., 2019, In : Journal of Materials Engineering and Performance. 28, 7, p. 3922–3928

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
84 Downloads (Pure)

Gradient Microstructure in a Gear Steel Produced by Pressurized Gas Nitriding

Yang, R., Wu, G., Zhang, X., Fu, W., Hansen, N. & Huang, X., 2019, In : Materials. 12, 22, 12 p., 3797.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
24 Downloads (Pure)

Grain boundary wetting correlated to the grain boundary properties: A laboratory-based multimodal X-ray tomography investigation

Sun, M., Zhang, Y., Lyckegaard, A., Bachmann, T., Lauridsen, E. M. & Juul Jensen, D., 2019, In : Scripta Materialia. 163, p. 77-81

Research output: Contribution to journalJournal articleResearchpeer-review

Grain-size affected mechanical response and deformation behavior in microscale reverse extrusion

Zhang, B., Dodaran, M., Ahmed, S., Shao, S., Meng, W. J., Juul, K. J. & Nielsen, K. L., 2019, In : Materialia. 6, 13 p., 100272.

Research output: Contribution to journalJournal articleResearchpeer-review

Grain size effect on deformation mechanisms in Mg-3Gd

Luo, X., Luo, J. Q., Feng, Z. Q., Hu, F. P., Yu, T., Berggreen, C., Wu, G. L., Hansen, N. & Huang, X., 2019, In : I O P Conference Series: Materials Science and Engineering. 580, 1, 6 p., 012040.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
24 Downloads (Pure)

Grain size effect on the mechanical behavior of metastable Fe-23Cr-8.5Ni alloy

Xie, L., Wang, C., Wang, Y., Wu, G. & Huang, X., 2019, In : Metals. 9, 7, 12 p., 734.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
42 Downloads (Pure)

Graphene nanoclusters embedded nickel cobaltite nanofibers as multifunctional electrocatalyst for glucose sensing and water-splitting applications

Kumar, B. S., Gudla, V. C., Ambat, R., Kalpathy, S. K. & Anandhan, S., 2019, In : Ceramics International. 45, 18, Part B, p. 25078-25091

Research output: Contribution to journalJournal articleResearchpeer-review

Heat pump working fluid selection—economic and thermodynamic comparison of criteria and boundary conditions

Zühlsdorf, B., Jensen, J. K. & Elmegaard, B., 2019, In : International Journal of Refrigeration. 98, p. 500-513

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Heat release analysis for rapid compression machines: Challenges and opportunities

Goldsborough, S. S., Santner, J., Kang, D., Fridlyand, A., Rockstroh, T. & Jespersen, M. C., 2019, In : Proceedings of the Combustion Institute. 37, 1, p. 603-611

Research output: Contribution to journalJournal articleResearchpeer-review

Heterogeneous microstructure and enhanced mechanical properties in annealed multilayered IF steel

Jiang, X., Zhang, L., Zhang, L., Huang, T., Wu, G., Huang, X. & Mishin, O. V., 2019, In : Materials Science and Engineering A. 759, p. 262-271

Research output: Contribution to journalJournal articleResearchpeer-review

High and Low Temperature Surface Hardening of Martensitic Stainless Steels

Tibollo, C., Villa, M., Christiansen, T. L. & Somers, M. A. J., 2019. 10 p.

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

7 Downloads (Pure)

High efficiency SNG production from biomass and electricity by integrating gasification with pressurized solid oxide electrolysis cells

Clausen, L. R., Butera, G. & Jensen, S. H., 2019, In : Energy. 172, p. 1117-1131

Research output: Contribution to journalJournal articleResearchpeer-review

High frequency pulse anodising of aluminium: Anodising kinetics and optical appearance

Jensen, F., Gudla, V. C., Kongstad, I. & Ambat, R., 2019, In : Surface and Coatings Technology. 360, p. 222-231

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)