Department of Mechanical Engineering

  • Nils Koppels Allé, 404

    DK-2800 Kgs. Lyngby

    Denmark

Research Output

2019

A non-local SIMP model and sensitivity filtering

Evgrafov, A. & C. Bellido, J., 2019, Advances in Structural and Multidisciplinary Optimization: Proceedings of the 13th World Congress of Structural and Multidisciplinary Optimization. Guo, X. & Huang, H. (eds.). Dalian University of Technology Electronic & Audio-visual Press, p. 221-225

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

A Novel Electroscrubbing Process for Gas Cleaning

Villadsen, S. N. B., 2019, Kgs. Lyngby, Denmark: Technical University of Denmark. 219 p.

Research output: Book/ReportPh.D. thesis

Open Access
File
17 Downloads (Pure)

A periodic linear–quadratic controller for suppressing rotor-blade vibration

Camino, J. F. & Santos, I. F., 2019, In : Journal of Vibration and Control. 25, 17, p. 2351–2364

Research output: Contribution to journalJournal articleResearchpeer-review

A potential for higher-order phenomenological strain gradient plasticity to predict reliable response under non-proportional loading

Panteghini, A., Bardella, L. & Niordson, C. F., 2019, In : Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 475, 2229, 21 p., 20190258.

Research output: Contribution to journalJournal articleResearchpeer-review

Application of a projection method for simulating flow of a shear-thinning fluid

Jabbari, M., McDonough, J., Mitsoulis, E. & Hattel, J. H., 2019, In : Fluids . 4, 3, 16 p., 124.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
44 Downloads (Pure)

Application of OMA techniques to LTP systems

Deon, M., Santos, I. F. & Coppotelli, G., 2019, Proceedings of the 8th Iomac - International Operational Modal Analysis Conference. p. 577-589

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Application of Sensor Fusion to Drive Vessel Performance

Ikonomakis, A., Galeazzi, R., Dietz, J., Kähler Holst, K. & Nielsen, U. D., 2019, p. 229-241.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
67 Downloads (Pure)

Application of the group contribution volume translated Peng-Robinson equation of state to new commercial refrigerant mixtures

Bell, I. H., Welliquet, J., Mondejar, M. E., Bazyleva, A., Quoilin, S. & Haglind, F., 2019, In : International Journal of Refrigeration. 103, p. 316-328

Research output: Contribution to journalJournal articleResearchpeer-review

Application search in solution-driven biologically inspired design

Lenau, T. A., 2019, Proceedings of the Design Society: 22nd International Conference on Engineering Design (ICED19). Wartzack, S. & Schleich, B. (eds.). Design Society, p. 269-278 (Proceedings of the International Conference on Engineering Design; No. DS94).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
58 Downloads (Pure)

A review of heat transfer enhancement techniques in plate heat exchangers

Zhang, J., Zhu, X., Mondejar, M. E. & Haglind, F., 2019, In : Renewable and Sustainable Energy Reviews. 101, p. 305-328

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

A sheet metal necking formability diagram for nonlinear strain paths

Christiansen, P., Jensen, M. R. B. & Winther, G., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 233, 7, p. 1287-1294 8 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
112 Downloads (Pure)

A simple method for coupled acoustic-mechanical analysis with application to gradient-based topology optimization

Jensen, J. S., 2019, In : Structural and Multidisciplinary Optimization. 59, 5, p. 1567–1580

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
40 Downloads (Pure)

Aspects of Multi-pass GTAW of Low Alloyed Steels

Somlo, K. & Sziebig, G., 2019, In : IFAC-PapersOnLine. 52, 22, p. 101-107 7 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
15 Downloads (Pure)

Assessment of a combination of three heat sources for heat pumps to supply district heating

Pieper, H., Ommen, T., Elmegaard, B. & Markussen, W. B., 2019, In : Energy. 176, p. 156-170

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Assessment of methods for performance comparison of pure and zeotropic working fluids for organic Rankine cycle power systems

Andreasen, J. G., Kærn, M. R. & Haglind, F., 2019, In : Energies. 12, 9, 25 p., 1783.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
103 Downloads (Pure)

Assessment of the inflatable core assisted paper bottle moulding process

Saxena, P. & Bissacco, G., 2019, In : Procedia Manufacturing. 33, p. 312-318

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
122 Downloads (Pure)

A steady-state modeling framework incorporating the Kuroda–Tvergaard model: demonstrated on single crystal crack growth

Juul, K. J., El-Naaman, S. A., Nielsen, K. L. & Niordson, C. F., 2019, In : Archive of Applied Mechanics. 89, 10, p. 2133–2145

Research output: Contribution to journalJournal articleResearchpeer-review

A stress-based topology optimization method for heterogeneous structures

Conlan-Smith, C. & James, K. A., 2019, In : Structural and Multidisciplinary Optimization. 60, 1, p. 167-183

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

A study on a polygeneration plant based on solar power and solid oxide cells

Ullvius, N. C. & Rokni, M., 2019, In : International Journal of Hydrogen Energy. 44, p. 19206-19223

Research output: Contribution to journalJournal articleResearchpeer-review

A study on fully nonlinear wave load effects on floating wind turbine

Xu, K., Shao, Y., Gao, Z. & Moan, T., 2019, In : Journal of Fluids and Structures. 88, p. 216-240

Research output: Contribution to journalJournal articleResearchpeer-review

A study on the feasibility of in-process compensation of cutting force induced errors using axes motors absorbed current

Checchi, A., Dalla Costa, G., Haastrup Merrild, C., Bissacco, G. & Hansen, H. N., 2019, Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019). Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 194-195

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
22 Downloads (Pure)

A theoretical foundation for developing a prescriptive method for the co-design of circular economy value chains

Blomsma, F., Pigosso, D. C. & McAloone, T. C., 2019, Proceedings of the 22nd International Conference on Engineering Design (ICED19). Cambridge University Press, Vol. 1. p. 3141-3150 10 p. (Proceedings of the International Conference on Engineering Design; No. 1, Vol. 1).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
18 Downloads (Pure)

A unified model for microstructural coarsening of deformed metals

Yu, T., 2019, In : I O P Conference Series: Materials Science and Engineering. 580, 1, 6 p., 012054.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
File
16 Downloads (Pure)

Automated wind turbine gearbox bearing diagnosis algorithm based on vibration data analysis and signal pre-whitening

Schlechtingen, M. & Santos, I., 2019, Proceedings of 13th SIRM: The 13th International Conference on Dynamics of Rotating Machinery. Kgs. Lyngby: Technical University of Denmark, p. 88-114

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
52 Downloads (Pure)

Automatic Design of Soft Dielectric Elastomer Actuators With Optimal Spatial Electric Fields

Chen, F., Liu, K., Wang, Y., Zou, J., Gu, G. & Zhu, X., 2019, In : IEEE Transactions on Robotics. 35, 5, p. 1150-1165

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
16 Downloads (Pure)

Axially variable-length solid element of absolute nodal coordinate formulation

Sun, J., Tian, Q., Hu, H. & Pedersen, N. L., 2019, In : Acta Mechanica Sinica. 35, p. 653–663

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

A “poor man’s” approach for high-resolution three-dimensional topology design for natural convection problems

Pollini, N., Sigmund, O., Andreasen, C. S. & Alexandersen, J., 2019, In : Advances in Engineering Software. 140, 18 p., 102736.

Research output: Contribution to journalJournal articleResearchpeer-review

A “poor man’s” approach to topology optimization of natural convection problems

Asmussen, J., Alexandersen, J., Sigmund, O. & Andreasen, C. S., 2019, In : Structural and Multidisciplinary Optimization. 59, 4, p. 1105-1124

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Backcalculation of Raptor (RWD) Measurements and Forward Prediction of FWD Deflections Compared with FWD Measurements

Madsen, S. S. & Pedersen, N. L., 2019, Proceedings of the International and Highway Pavements Conference. American Society of Civil Engineers, p. 382-391

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Battery pack manufacturing - a redefinition of requirements for joining technologies

Zwicker, M. F. R., Moghadam, M., Zhang, W. & Nielsen, C. V., 2019

Research output: Non-textual formSound/Visual production (digital)Research

Open Access
File
22 Downloads (Pure)

Benchmarking of Laser Powder Bed Fusion Machines

Moshiri, M., Candeo, S., Carmignato, S., Mohanty, S. & Tosello, G., 2019, In : Journal of Manufacturing and Materials Processing. 2019, 3, 30 p., 85.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
82 Downloads (Pure)
22 Downloads (Pure)

Biomechanical, Structural and Performance Analysis of a Specific Type of Cardiac Assist Device Used in Left Ventricular Failures

Rahmani, S., Heidari, A., Saed, B., Mahpour, A., Navidbakhsh, M. & Alizadeh, M., 1 Jan 2019, In : Iranian Journal of Science and Technology - Transactions of Mechanical Engineering. 12 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Book of presentations of the 2nd Symposium on High-Temperature Heat Pumps

Zühlsdorf, B. (ed.), Bantle, M. (ed.) & Elmegaard, B. (ed.), 2019, SINTEF. 268 p.

Research output: Book/ReportAnthology

Open Access
File
334 Downloads (Pure)

Breaking the Limit of Micro-Ductility in Oxide Glasses

Januchta, K., Stepniewska, M., Jensen, L. R., Zhang, Y., Somers, M. A. J., Bauchy, M., Yue, Y. & Smedskjær, M. M., 2019, In : Advanced Science. 6, 18, 9 p., 1901281.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
41 Downloads (Pure)

Build orientation effects on the roughness of SLM channels

Klingaa, C. G., Dahmen, T., Baier, S., Mohanty, S. & Hattel, J. H., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 111-114

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Open Access
File
34 Downloads (Pure)

Business cases for ecodesign implementation: a simulation-based framework

Rodrigues, V. P., Pigosso, D. C. A. & McAloone, T. C., 2019, In : Journal of Cleaner Production. 234, p. 1045-1058

Research output: Contribution to journalJournal articleResearchpeer-review

Business model innovation for circular economy: integrating literature and practice into a conceptual process model

de Pádua Pieroni, M., McAloone, T. & Pigosso, D., 2019, Proceedings of the Design Society: 22nd International Conference on Engineering Design (ICED19). Wartzack, S. & Schleich, B. (eds.). Cambridge University Press, p. 2517-2526 (Proceedings of the International Conference on Engineering Design; No. DS94).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
97 Downloads (Pure)

Business model innovation for circular economy and sustainability: A review of approaches

Pieroni, M. P., McAloone, T. & Pigosso, D. A. C., 2019, In : Journal of Cleaner Production. 215, p. 198-216

Research output: Contribution to journalJournal articleResearchpeer-review

2 Downloads (Pure)

Can the choice of eco-design principles affect products’ success?

Maccioni, L., Borgianni, Y. & Pigosso, D. C. A., 2019, In : Design Science. 5, 31 p., e25.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
15 Downloads (Pure)

Career adaptability and entrepreneurial behaviour in the K-12 classroom

Neto, R., Rodrigues, V. P., Polega, M. & Persons, M., 2019, In : Teachers and Teaching: Theory and Practice. 25, 1, p. 90-109

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
1 Downloads (Pure)

Centrifugal and hydroplaning phenomena in high-speed polishing

Zhu, W. L., Ben Achour, S. & Beaucamp, A., 2019, In : CIRP annals. 68, 1, p. 369-372

Research output: Contribution to journalJournal articleResearchpeer-review

CFD Analysis of Ship Propeller Thrust Breakdown

Shin, K. W. & Andersen, P., 2019. 9 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
24 Downloads (Pure)

Challenges in the development of a database of thermophysical properties of nanofluids

Mondejar, M. E., Regidor, M., Kontogeorgis, G. & Haglind, F., 2019. 4 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
44 Downloads (Pure)

Challenges of Digital Transformation: The case of the Non-Profit Sector

Shafiee Nahrkhalaji, S., Shafiee, S., Shafiee, M. & Hvam, L., 2019, Proceedings of 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, p. 1245-1249

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

Open Access
File
297 Downloads (Pure)

Change of the Decorative Properties of Zinc-Plated Zinc Die Castings over Time

Reveko, V., Lampert, F., Winther, G. & Møller, P., 2019, In : International Journal of Metalcasting. 13, 1, p. 130-136

Research output: Contribution to journalJournal articleResearchpeer-review

Characterization of blisters on powder coated aluminium AA5006 architectural profiles

Zaffaroni, G. G. B., Gudla, V. C., Ud Din, R. & Ambat, R., 2019, In : Engineering Failure Analysis. 103, p. 347-360

Research output: Contribution to journalJournal articleResearchpeer-review

Characterization techniques for evaluation of micro scale vat photopolymerization-based additive manufacturing

Danielak, A. H., Mendez Ribo, M., Üstünyagiz, E., Almdal, K., Islam, A. & Pedersen, D. B., 2019, Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Bernard, A., Leach, R. K., Pedersen, D. B. & Taylor, J. S. (eds.). The European Society for Precision Engineering and Nanotechnology, p. 44-47

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review