Department of Mechanical Engineering

  • Nils Koppels Allé, 404

    DK-2800 Kgs. Lyngby

    Denmark

Research Output 1970 2020

2020

3D study of plastic flow localization at a void-sheet

Tvergaard, V. & Legarth, B. N., 2020, In : International Journal of Mechanical Sciences. 173, 9 p., 105426.

Research output: Contribution to journalJournal articleResearchpeer-review

A blind comparative study of focused wave interactions with floating structures: (CCP-WSI Blind Test Series 3)

Ransley, E., Yan, S., Brown, S., Hann, M., Windt, C., Schmitt, P., Davidson, J., Musiedlak, P. H., Wang, J., Wang, J., Ma, Q., Xie, Z., Zhang, N., Zheng, X., Giorgi, G., Chen, H., Lin, Z., Qian, L., Ma, Z., Bai, W. & 10 others, Chen, G-Q., Zang, J., Ding, H., Cheng, L., Zheng, J., Gu, H., Gong, X., Liu, Z., Bingham, H. B. & Greaves, D., 2020, (Accepted/In press) In : International Journal of Offshore and Polar Engineering.

Research output: Contribution to journalJournal articleResearchpeer-review

A first study of the potential of integrating an ejector in hydrogen fuelling stations for fuelling high pressure hydrogen vehicles

Wen, C., Rogié, B., Kærn, M. R. & Rothuizen, E. D., 2020, In : Applied Energy. 260, 1 p., 113958.

Research output: Contribution to journalJournal articleResearchpeer-review

2 Downloads (Pure)

Analysis of lubricant performance in punching and blanking

Moghadam, M., Villa, M., Moreau, P., Dubois, A., Dubar, L., Nielsen, C. V. & Bay, N., 2020, In : Tribology International. 141, 8 p., 105949.

Research output: Contribution to journalJournal articleResearchpeer-review

Analysis of Transient Vibrations for Estimating Bolted Joint Tightness

Brøns, M., Thomsen, J. J., Sah, S. M., Tcherniak, D. & Fidlin, A., 2020, Nonlinear Structures and Systems: Conference Proceedings of the Society for Experimental Mechanics Series. Brake, M. R. W. & Renson, L. (eds.). Springer, p. 21-24 (Conference Proceedings of the Society for Experimental Mechanics Series, Vol. 1).

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

An application-oriented roadmap to select polymeric nanocomposites for advanced applications: A review

Doagou-Rad, S., Islam, A. & Merca, T. D., 2020, (Accepted/In press) In : Polymer Composites.

Research output: Contribution to journalJournal articleResearchpeer-review

An electrochemical and X-ray computed tomography investigation of the effect of temperature on CO2 corrosion of 1Cr carbon steel

Rizzo, R., Baier, S., Rogowska, M. & Ambat, R., 2020, (Accepted/In press) In : Corrosion science. 108471.

Research output: Contribution to journalJournal articleResearchpeer-review

An experimental and theoretical approach of a pinned and a conventional ball bearing for active magnetic bearings

Fonseca, C. A., Santos, I. & Weber, H. I., 2020, In : Mechanical Systems and Signal Processing. 138, 106541.

Research output: Contribution to journalJournal articleResearchpeer-review

An experimental investigation of the corrosive influence of SO 2 relative to H 2 SO 4 of marine engine cylinder liners

Kjemtrup, L., Cordtz, R. F., Jensen, M. V. & Schramm, J., 2020, (Accepted/In press) In : Lubrication Science.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

A simple characterization of H-convergence for a class of nonlocal problems

Bellido, J. C. & Evgrafov, A., 2020, (Accepted/In press) In : Revista Matemática Complutense.

Research output: Contribution to journalJournal articleResearchpeer-review

A single parameter approach to enhance the microstructural and mechanical properties of beta Ti-Nb alloy via open-air fiber laser nitriding

Chan, C. W., Chang, X., Bozorgzadeh, M. A., Smith, G. C. & Lee, S., 2020, In : Surface and Coatings Technology. 383, 11 p., 125269.

Research output: Contribution to journalJournal articleResearchpeer-review

Assessment of the impact of inventory optimization drivers in a multi-echelon supply chain: Case of a toy manufacturer

Chinello, E., Herbert-Hansen, Z. N. L. & Khalid, W., 2020, In : Computers & Industrial Engineering. 141, 22 p., 106232.

Research output: Contribution to journalJournal articleResearchpeer-review

27 Downloads (Pure)

A System Engineering Approach Using FMEA and Bayesian Network for Risk Analysis—A Case Study

Rastayesh, S., Bahrebar, S., Blaabjerg, F., Zhou, D., Wang, H. & Sørensen, J. D., 2020, In : Sustainability. 12, 1, 18 p., 77.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File
13 Downloads (Pure)

A “User-Knowledge-Product” Co-Creation Cyberspace Model for Product Innovation

Wang, Y., Wu, J., Zhang, R., Shafiee, S. & Li, C., 2020, In : Complexity. 2020, 20 p., 7190169.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel

Cao, Z., Liu, T., Yu, F., Cao, W., Zhang, X. & Weng, Y., 2020, In : International Journal of Fatigue. 131, 6 p., 105351.

Research output: Contribution to journalJournal articleResearchpeer-review

CFD investigations of breaking focused wave-induced loads on a monopile and the effect of breaker location

Aggarwal, A., Tomaselli, P. D., Christensen, E. D. & Bihs, H., 2020, In : Journal of Offshore Mechanics and Arctic Engineering. 142, 2, 8 p., 021903.

Research output: Contribution to journalJournal articleResearchpeer-review

7 Downloads (Pure)

CFD investigations of scour beneath a submarine pipeline with the effect of upward seepage

Li, Y., Ong, M. C. & Fuhrman, D. R., 2020, In : Coastal engineering. 156, 12 p., 103624.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

CFD Simulation of Mixing and Segregation of Binary Solid Mixtures in a Dense Fluidized Bed

Anicic, B., Lu, B., Lin, W., Wu, H., Dam-Johansen, K. & Wang, W., 2020, In : The Canadian Journal of Chemical Engineering. 98, 1, p. 412-420 9 p.

Research output: Contribution to journalJournal articleResearchpeer-review

Computational fluid dynamic modeling of liquid-gas flow patterns and hydraulics in the cross-corrugated channel of a plate heat exchanger

Zhu, X. & Haglind, F., 2020, In : International Journal of Multiphase Flow. 122, 11 p., 103163.

Research output: Contribution to journalJournal articleResearchpeer-review

Corrosion of carbon steel under CO2 conditions: Effect of CaCO3 precipitation on the stability of the FeCO3 protective layer

Rizzo, R., Gupta, S., Rogowska, M. & Ambat, R., 2020, In : Corrosion science. 162, 12 p., 108214.

Research output: Contribution to journalJournal articleResearchpeer-review

Damage evolution around white etching layer during uniaxial loading

Jessop, C., Ahlström, J., Persson, C. & Zhang, Y., 2020, In : Fatigue and Fracture of Engineering Materials and Structures. 43, 1, p. 201-208

Research output: Contribution to journalJournal articleResearchpeer-review

Determination of the force transmission error in a single-sinker magnetic suspension densimeter due to the fluid-specific effect and its correction for use with gas mixtures containing oxygen

Lozano-Martín, D., Mondéjar, M. E., Segovia, J. J. & Chamorro, C. R., 2020, In : Measurement. 151, 11 p., 107176.

Research output: Contribution to journalJournal articleResearchpeer-review

13 Downloads (Pure)

Development of Stochastic Fatigue Model of Reinforcement for Reliability of Concrete Structures

Rastayesh, S., Mankar, A., Dalsgaard Sørensen, J. & Bahrebar, S., 2020, In : Applied Sciences. 10, 2, 13 p., 604.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Effect of low-temperature surface hardening by carburization on the fatigue behavior of AISI 316L austenitic stainless steel

Peng, Y., Liu, Z., Chen, C., Gong, J. & Somers, M. A. J., 2020, In : Materials Science and Engineering A. 769, 9 p., 138524.

Research output: Contribution to journalJournal articleResearchpeer-review

Effect of polymer relaxation in automated micro polishing

Ben Achour, S., Zhu, W., Bissacco, G., Beaucamp, A. & De Chiffre, L., 2020, In : AIP Conference Proceedings. 2205, 1, 5 p., 020060.

Research output: Contribution to journalConference articleResearchpeer-review

Effects of heat and pressure on hot-pressed geopolymer

Ranjbar, N., Kashefi, A., Ye, G. & Mehrali, M., 2020, In : Construction and Building Materials. 231, 8 p., 117106.

Research output: Contribution to journalJournal articleResearchpeer-review

Fiber-reinforced geopolymer composites: A review

Ranjbar, N. & Zhang, M., 2020, In : Cement and Concrete Composites. 107, 19 p., 103498.

Research output: Contribution to journalJournal articleResearchpeer-review

14 Downloads (Pure)

Full three dimensional cavitation instabilities using a non-quadratic anisotropic yield function

Legarth, B. N. & Tvergaard, V., 2020, In : Journal of Applied Mechanics. 87, 3, 10 p., 031009.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Gaseous surface hardening of Ti-6Al-4V fabricated by selective laser melting

Valente, E. H., Jellesen, M. S., Somers, M. A. J. & Christiansen, T. L., 2020, In : Surface and Coatings Technology. 383, 13 p., 125278.

Research output: Contribution to journalJournal articleResearchpeer-review

Humidity Robustness of Plasma-Coated PCBs

Khangholi, A., Li, F., Piotrowska, K., Loulidi, S., Ambat, R., Van Assche, G., Hubin, A. & De Graeve, I., 2020, In : Journal of Electronic Materials. 49, 1, p. 848-860

Research output: Contribution to journalJournal articleResearchpeer-review

13 Downloads (Pure)

Implications of lattice structures on economics and productivity of metal powder bed fusion

Flores, I., Kretzschmar, N., Azman, A. H., Chekurov, S., Pedersen, D. B. & Chaudhuri, A., 2020, In : Additive Manufacturing. 31, 17 p., 100947.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Improving the efficiency of upconversion by light concentration using nanoparticle design: Topical Review

Madsen, S. P., Christiansen, J., Christiansen, R. E., Vester-Petersen, J., Møller, S. H., Lakhotiya, H., Nazir, A., Eriksen, E., Roesgaard, S., Sigmund, O., Lissau, J. S., Destouesse, E., Madsen, M., Julsgaard, B. & Balling, P., 2020, In : Journal of Physics D: Applied Physics. 53, 7, 39 p., 073001.

Research output: Contribution to journalJournal articleResearchpeer-review

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, F., Basso, A., Kain, M., Loaldi, D., Li, D., Zhang, Y. & Tosello, G., 2020, In : AIP Conference Proceedings. 2205, 1, 5 p., 020013.

Research output: Contribution to journalConference articleResearchpeer-review

11 Downloads (Pure)

Interactions of salivary mucins and saliva with food proteins: a review

Çelebioğlu, H. Y., Lee, S. & Chronakis, I. S., 2020, In : Critical Reviews in Food Science and Nutrition. 60, 1, p. 64-83 20 p.

Research output: Contribution to journalReviewResearchpeer-review

Open Access
File

Isotropic “Quasi‐Fluid” Metamaterials Designed by Topology Optimization

Zhang, H., Kang, Z., Wang, Y. & Wu, W., 2020, In : Advanced Theory and Simulations. 3, 1, 7 p., 1900182.

Research output: Contribution to journalJournal articleResearchpeer-review

10 Downloads (Pure)
Open Access
File

Measurement of polymers with 3D optical scanners: evaluation of the subsurface scattering effect through five miniature step gauges: Paper

Guerra, M. G., Gregersen, S. K. S., Frisvad, J. R., De Chiffre, L., Lavecchia, F. & Galantucci, L. M., 2020, In : Measurement Science and Technology. 31, 1, 15 p., 015010.

Research output: Contribution to journalJournal articleResearchpeer-review

Mechanical properties of additively manufactured die with numerical analysis in extrusion process

Davoudinejad, A., Bayat, M., Larsen, A., Pedersen, D. B., Hattel, J. H. & Tosello, G., 2020, In : A I P Conference Proceedings Series. 2205, 1, 5 p., 020006 .

Research output: Contribution to journalConference articleResearchpeer-review

Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method

Xu, C. L., Andriollo, T., Zhang, Y. B., Hernando, J. C., Hattel, J. & Tiedje, N., 2020, In : Scripta Materialia. 178, p. 463 - 467

Research output: Contribution to journalJournal articleResearchpeer-review

Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys

Lozinko, A., Zhang, Y., Mishin, O. V., Klement, U. & Guo, S., 2020, In : Journal of Alloys and Compounds. 822, 7 p., 153558.

Research output: Contribution to journalJournal articleResearchpeer-review

Multi-domain stability and modal analysis applied to Gas Foil Bearings: Three approaches

Osmanski, S. V., Larsen, J. S. & Santos, I. F., 2020, In : Journal of Sound and Vibration. 472, 24 p., 115174.

Research output: Contribution to journalJournal articleResearchpeer-review

Multi-metal additive manufacturing process chain for optical quality mold generation

Biondani, F. G., Bissacco, G., Mohanty, S., Tang, P. T. & Hansen, H. N., 2020, In : Journal of Materials Processing Technology. 277, 6 p., 116451.

Research output: Contribution to journalJournal articleResearchpeer-review

Non-equilibrium condensation of water vapour in supersonic flows with shock waves

Wen, C., Karvounis, N., Walther, J. H., Ding, H. & Yang, Y., 2020, In : International Journal of Heat and Mass Transfer. 149, 16 p., 119109.

Research output: Contribution to journalJournal articleResearchpeer-review

Nonlinear compressive stability of hyperelastic 2D lattices at finite volume fractions

Bluhm, G. L., Sigmund, O., Wang, F. & Poulios, K., 2020, In : Journal of the Mechanics and Physics of Solids. 137, 19 p., 103851.

Research output: Contribution to journalJournal articleResearchpeer-review

Nonlinear Evolution of a Steep, Focusing Wave Group in Deep Water Simulated with OceanWave3D

Barratt, D., Bingham, H. B. & Adcock, T. A. A., 2020, In : Journal of Offshore Mechanics and Arctic Engineering. 142, 9 p., 021201.

Research output: Contribution to journalJournal articleResearchpeer-review

8 Downloads (Pure)

Numerical investigation of wave-plus-current induced scour beneath two submarine pipelines in tandem

Li, Y., Ong, M. C., Fuhrman, D. R. & Larsen, B. E., 2020, In : Coastal engineering. 156, 19 p., 103619.

Research output: Contribution to journalJournal articleResearchpeer-review

Open Access
File

Ocean wave spectrum estimation using measured vessel motions from an in-service container ship

Nielsen, U. D. & Dietz, J., 2020, In : Marine Structures. 69, 13 p., 102682.

Research output: Contribution to journalJournal articleResearchpeer-review