Thermal and water management of low temperature Proton Exchange Membrane Fuel Cell in fork-lift truck power system

Research output: Research - peer-reviewJournal article – Annual report year: 2013

View graph of relations

A general zero-dimensional Proton Exchange Membrane Fuel Cell (PEMFC) model has been developed for forklift truck application. The balance of plant (BOP) comprises of a compressor, an air humidifier, a set of heat exchangers and a recirculation pump. Water and thermal management of the fuel cell stack and BOP has been investigated in this study. The results show that humidification of the inlet air is of great importance. By decreasing the relative humidity of inlet air from 95% to 25%, the voltage can drop by 29%. In addition, elevated stack temperature can lead to a higher average cell voltage when membrane is fully hydrated otherwise it causes a drastic voltage drop in the stack. Furthermore, by substituting liquid water with water-ethylene glycol mixture of 50%, the mass flow of coolant increases by about 32-33% in the inner loop and 60-65% in the outer loop for all ranges of current. The system can then be started up at about -25. °C with negligible change in the efficiency. © 2012 Elsevier Ltd.
Original languageEnglish
JournalApplied Energy
Volume104
Pages (from-to)434-444
ISSN0306-2619
DOIs
StatePublished - 2013
CitationsWeb of Science® Times Cited: 42

    Research areas

  • PEM, Fuel cells, Thermal management, Water management, Forklift, Power system
Download as:
Download as PDF
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
Word

ID: 51728689