DTU Mechanical Engineering

Local database

Publisher

  1. 2014
  2. Published

    Development of Hydrogen Electrodes for Alkaline Water Electrolysis. / Kjartansdóttir, Cecilía Kristín; Møller, Per (Supervisor).

    DTU Mechanical Engineering, 2014. 189 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  3. Published

    End-to-end requirements management for multiprojects in the construction industry. / Wörösch, Michael; Mortensen, Niels Henrik (Supervisor); Hvam, Lars (Supervisor).

    DTU Mechanical Engineering, 2014. 288 p. (DCAMM Special Report; No. S162).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  4. Published

    Experimental Bifurcation Analysis Using Control-Based Continuation. / Bureau, Emil; Santos, Ilmar (Main supervisor); Thomsen, Jon Juel (Supervisor); Starke, Jens.

    DTU Mechanical Engineering, 2014. 145 p. (DCAMM Special Report; No. S163).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  5. Published

    Isothermal Martensite Formation. / Villa, Matteo; Somers, Marcel A. J. (Main supervisor); Pantleon, Karen (Supervisor).

    Kgs. Lyngby : DTU Mechanical Engineering, 2014. 314 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  6. Published
  7. Published
  8. 2013
  9. Published

    A global condition monitoring system for wind turbines. / Schlechtingen, Meik; Santos, Ilmar (Main supervisor).

    DTU Mechanical Engineering, 2013. 163 p. (DCAMM Special Report; No. S150).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  10. Published

    Dynamic Performance of a PEM Fuel Cell System. / Rabbani, Raja Abid; Rokni, Masoud (Supervisor).

    DTU Mechanical Engineering, 2013. 288 p. (DCAMM Special Report; No. S154).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  11. Published

    Dynamics of Rigid Bodies and Flexible Beam Structures. / Nielsen, Martin Bjerre; Krenk, Steen (Main supervisor).

    DTU Mechanical Engineering, 2013. (DCAMM Special Report; No. S156).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  12. Published

    Heat Transfer in Large Two-Stroke Marine Diesel Engines. / Jensen, Michael Vincent; Walther, Jens Honore (Supervisor); Carlsen, Henrik (Supervisor); Schramm, Jesper (Supervisor).

    DTU Mechanical Engineering, 2013. 196 p. (DCAMM Special Report; No. S157).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  13. Published

    Inter laboratory comparison on Industrial Computed Tomography : CIA-CT comparison. Final Report. / Angel, Jais Andreas Breusch; De Chiffre, Leonardo.

    DTU Mechanical Engineering, 2013. 75 p. (CIA-CT Final Report; No. 01).

    Publication: ResearchReport – Annual report year: 2013

  14. Published

    Inter laboratory comparison on Industrial Computed Tomography : CIA-CT comparison. Reference Measurements. / Angel, Jais Andreas Breusch; De Chiffre, Leonardo; Larsen, Erik; Rasmussen, Jakob; Sobiecki, Rene.

    DTU Mechanical Engineering, 2013. 86 p. (CIA-CT Reference Measurements; No. 01).

    Publication: ResearchReport – Annual report year: 2013

  15. Published

    Numerical study of evaporators in power plants for improved dynamic fl exibility. / Johansen, Axel Vodder Ohrt; Elmegaard, Brian (Supervisor); Kristensen, Torkild (Supervisor); Sørensen, Jens Nørkær (Supervisor).

    DTU Mechanical Engineering, 2013. 552 p. (DCAMM Special Report; No. S165).

    Publication: ResearchPh.D. thesis – Annual report year: 2014

  16. Published
  17. 2012
  18. Published

    Compensation of Airflow Maldistribution in Fin-and-Tube Evaporators. / Kærn, Martin Ryhl (Author).

    2012. DTU Mechanical Engineering.1st Symposium on Advances in Refrigeration and Heat Pump Technology, Kgs. Lyngby, Denmark, 15/05/12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

  19. Published

    DTU International Energy Report ...setting the global energy scene. / Larsen, Hans Hvidtfeldt (Author).

    2012. DTU Mechanical Engineering.1st Symposium on Advances in Refrigeration and Heat Pump Technology, Kgs. Lyngby, Denmark, 15/05/12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

  20. Published

    Engineering the heat curve – a theoretical study. / Larsen, Ulrik (Author).

    2012. DTU Mechanical Engineering.1st Symposium on Advances in Refrigeration and Heat Pump Technology, Kgs. Lyngby, Denmark, 15/05/12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

  21. Published

    Fremtidens maritime ingeniøruddannelse - Tiltag og visioner på Danmarks Tekniske Universitet. / Nielsen, Ulrik Dam (Author); Andersen, Ingrid Marie Vincent (Author).

    2012. DTU Mechanical Engineering.Kick-off konference for Danmarks Maritime Klynge, København, Denmark, 10/05/12.

    Publication: CommunicationSound/Visual production (digital) – Annual report year: 2012

  22. Published

    Heat Pump Booster Configurations in Novel District Heating Networks. / Ommen, Torben Schmidt (Author).

    2012. DTU Mechanical Engineering.1st Symposium on Advances in Refrigeration and Heat Pump Technology, Kgs. Lyngby, Denmark, 15/05/12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

  23. Published

    Heat Transfer in Two-Stroke Diesel Engines for Large Ship Propulsion. / Christiansen, Caspar Ask; Schramm, Jesper (Main supervisor).

    DTU Mechanical Engineering, 2012. 179 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  24. Published

    Interaction between Seabed Soil and Offshore Wind Turbine Foundations. / Hansen, Nilas Mandrup; Sumer, B. Mutlu (Main supervisor); Fredsøe, Jørgen (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 154 p. (DCAMM Special Report; No. S143).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  25. Published

    Inter laboratory comparison on Industrial Computed Tomography : CIA-CT comparison. Technical Protocol. / Angel, Jais Andreas Breusch; De Chiffre, Leonardo; Larsen, Erik; Rasmussen, Jakob.

    DTU Mechanical Engineering, 2012. 12 p.

    Publication: ResearchReport – Annual report year: 2012

  26. Published

    Laminar-Turbulent transition on Wind Turbines. / Martinez Hernandez, Gabriel Gerardo; Sørensen, Jens Nørkær (Supervisor); Shen, Wen Zhong (Supervisor).

    Kgs. Lyngby : DTU Mechanical Engineering, 2012. 133 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  27. Published

    Magnetic refrigeration – and heating. / Bahl, Christian (Author).

    2012. DTU Mechanical Engineering.1st Symposium on Advances in Refrigeration and Heat Pump Technology, Kgs. Lyngby, Denmark, 15/05/12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

  28. Published

    Modeling and Design of Hybrid PEM Fuel Cell Systems for Lift Trucks. / Hosseinzadeh, Elham; Rokni, Masoud (Supervisor).

    DTU Mechanical Engineering, 2012. 254 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  29. Published

    Modeling of dynamically loaded hydrodynamic bearings at low Sommerfeld numbers. / Thomsen, Kim; Klit, Peder (Supervisor); Vølund, Anders (Supervisor); Santos, Ilmar (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 218 p. (DCAMM Special Report; No. 5144).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  30. Published

    Modelling and Control of Magnetorheological Damper : Real-time implementation and experimental verification. / Bhowmik, Subrata; Høgsberg, Jan Becker (Main supervisor); Krenk, Steen (Supervisor); Weber, Felix (Supervisor).

    DTU Mechanical Engineering, 2012. 198 p. (DCAMM Special Report; No. S139).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  31. Published
  32. Published

    Pumpable Phase Change Material. / Wronski, Jorrit (Author).

    2012. DTU Mechanical Engineering.1st Symposium on Advances in Refrigeration and Heat Pump Technology, Kgs. Lyngby, Denmark, 15/05/12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

  33. Published

    Sea state estimation from an advancing ship - The wave buoy analogy : Presentation at Skibsteknisk Selskab. / Nielsen, Ulrik Dam (Author); Andersen, Ingrid Marie Vincent (Author).

    2012. DTU Mechanical Engineering.Operational Decision Support and Performance Monitoring, København, Denmark, 05/03/12.

    Publication: CommunicationSound/Visual production (digital) – Annual report year: 2012

  34. Published

    Second-law Efficiency and COP of Supermarked Refrigeration Systems. / Brix, Wiebke (Author).

    2012. DTU Mechanical Engineering.1st Symposium on Advances in Refrigeration and Heat Pump Technology, Kgs. Lyngby, Denmark, 15/05/12.

    Publication: ResearchSound/Visual production (digital) – Annual report year: 2012

  35. Published

    Slamming And Whipping Analysis Of Ships. / Seng, Sopheak; Pedersen, Preben Terndrup (Supervisor); Jensen, Jørgen Juncher (Supervisor).

    DTU Mechanical Engineering, 2012. 196 p. (DCAMM Special Report; No. S151).

    Publication: ResearchPh.D. thesis – Annual report year: 2013

  36. Published

    Systematic Design of Slow Light Waveguides. / Wang, Fengwen; Jensen, Jakob Søndergaard (Supervisor); Sigmund, Ole (Supervisor); Mørk, Jesper (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 166 p. (DCAMM Special Report; No. S145).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  37. Published
  38. Published

    Wave Manipulation by Topology Optimization. / Andkjær, Jacob Anders; Sigmund, Ole (Supervisor); Breinbjerg, Olav (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2012. 116 p. (DCAMM Special Report; No. S140).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  39. 2011
  40. Published
  41. Published

    A Full Hydro- and Morphodynamic Description of Breaker Bar Development. / Jacobsen, Niels Gjøl; Fredsøe, Jørgen (Supervisor).

    DTU Mechanical Engineering, 2011. 174 p. (DCAMM Special Report; No. S136).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  42. Published

    Development of HCCI Engines for Dimethyl Ether. / Hansen, Kim Rene; Pedersen, Troels Dyhr; Schramm, Jesper.

    DTU Mechanical Engineering, 2011. 74 p.

    Publication: ResearchReport – Annual report year: 2012

  43. Published

    From Hybrid to Actively-Controlled Gas Lubricated Bearings – Theory and Experiment. / Morosi, Stefano; Santos, Ilmar (Main supervisor).

    DTU Mechanical Engineering, 2011. 279 p. (DCAMM Special Report; No. S137).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  44. Published

    Geometrical metrology on vacuum cast silicone rubber form using computed tomography. / Pacurar, Ramona; Müller, Pavel; De Chiffre, Leonardo.

    DTU Mechanical Engineering, 2011. 68 p.

    Publication: Research - peer-reviewReport – Annual report year: 2011

  45. Published

    Introduction to computed tomography. / Cantatore, Angela; Müller, Pavel.

    Kgs.Lyngby : DTU Mechanical Engineering, 2011. 76 p.

    Publication: ResearchReport – Annual report year: 2012

  46. Published

    Molecular Dynamics Studies of Nanofluidic Devices. / Zambrano Rodriguez, Harvey Alexander; Walther, Jens Honore (Main supervisor).

    DTU Mechanical Engineering, 2011. 119 p. (DCAMM Special Report; No. S128).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  47. Published

    New Sol-Gel Coatings to Improve Casting Quality. / Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat (Supervisor).

    DTU Mechanical Engineering, 2011. 343 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  48. Published

    On Controllable Elastohydrodynamic Fluid Film Bearings. / Haugaard, Martin Asger; Klit, Peder (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2011. 182 p. (DCAMM Special Report; No. S125).

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  49. Published

    Optimization of advanced liquid natural gas-fuelled machineries for a high-speed ferry. / Tveitaskog, Kari Anne; Haglind, Fredrik.

    DTU Mechanical Engineering, 2011. 34 p.

    Publication: Research - peer-reviewReport – Annual report year: 2011

  50. Published

    Particle Methods in Bluff Body Aerodynamics. / Rasmussen, Johannes Tophøj; Walther, Jens Honore (Supervisor).

    DTU Mechanical Engineering, 2011. 160 p. (DCAMM Report; No. S146).

    Publication: ResearchPh.D. thesis – Annual report year: 2012

  51. Published

    Reproducibility of surface roughness in reaming. / Müller, Pavel; De Chiffre, Leonardo.

    DTU Mechanical Engineering, 2011. 270 p.

    Publication: Research - peer-reviewReport – Annual report year: 2011

  52. Published

    Waves and vibrations in inhomogeneous structures : bandgaps and optimal designs. / Jensen, Jakob Søndergaard.

    Kgs.Lyngby : DTU Mechanical Engineering, 2011. 313 p.

    Publication: ResearchDoctoral thesis – Annual report year: 2011

  53. 2010
  54. Published

    3D-SEM Metrology for Coordinate Measurements at the Nanometer Scale. / Carli, Lorenzo; De Chiffre, Leonardo (Supervisor); Hansen, Hans Nørgaard (Supervisor); Horsewell, Andy (Supervisor); Dirscherl, Kai (Supervisor).

    DTU Mechanical Engineering, 2010. 266 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2011

  55. Blast Performance of Protective Panels using 3D DIC and High Speed Photography : Master thesis. / Ólafsson, Ólafur Magnús.

    DTU Mechanical Engineering, 2010. 192 p.

    Publication: ResearchBook – Annual report year: 2010

  56. Published
  57. Published

    Mechatronics Applied to Machine Elements with Focus on Active Control of Bearing, Shaft and Blade Dynamics. / Santos, Ilmar.

    DTU Mechanical Engineering, 2010. 536 p.

    Publication: ResearchDoctoral thesis – Annual report year: 2010

  58. Published

    Resistance Welding of Advanced Materials and Micro Components. / Friis, Kasper Storgaard; Kristensen, Jens Klæstrup (Supervisor); Link, Norbert Joseph (Supervisor); Pantleon, Karen (Supervisor).

    Kgs.Lyngby : DTU Mechanical Engineering, 2010. 281 p.

    Publication: ResearchPh.D. thesis – Annual report year: 2010

  59. Published

    Use of reference objects for correction of measuring errors in X-ray computed tomography. / Müller, Pavel.

    Kgs.Lyngby : DTU Mechanical Engineering, 2010. 39 p.

    Publication: ResearchReport – Annual report year: 2010

  60. 2007
  61. Published

    Shape and Dimensions of Ripples. / Jacobsen, Niels Gjøl; Fredsøe, Jørgen (Supervisor).

    DTU Mechanical Engineering, 2007. 84 p.

    Publication: ResearchReport – Annual report year: 2007

  62. 2001
  63. Published

    An experimental study of a turbulent jet in cross-flow by using LDA. / Özcan, Oktay; Larsen, Poul Scheel.

    Kgs.Lyngby : DTU Mechanical Engineering, 2001. 147 p. (MEK-FM; No. 2001-02).

    Publication: ResearchReport – Annual report year: 2001

Download list:
Download as PDF
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
Word