Comparison of Problem Solving from Engineering Design to Software Design. / Ahmed-Kristensen, Saeema; Babar, Muhammad Ali .

In: Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2012). ASME, 2012.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2013

PIV Measurements of Turbulent Flow in a Channel with Solid or Perforated Ribs. / Wang, Lei; Salewski, Mirko; Sundén, Bengt.

In: Proceedings. Vol. 1 ASME, 2011. p. 1995-2003.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

A novel concept for floating offshor wind turbines : Recent developments in the concept and investigation on fluid intraction with the rotating foundation. / Vita, Luca; Zahle, Frederik; Schmidt Paulsen, Uwe; Friis Pedersen, Troels; Aagaard Madsen, Helge; Rasmussen, Flemming.

In: Proceedings OMAE2010. ASME, 2010. p. 389-396.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2010

Investigation of Failure Mechanisms in Ti containing Brazing Alloys used in SOFC/SOEC Environments. / Kiebach, Wolff-Ragnar; Knibbe, Ruth; Frederiksen, Kristian Bødker; Chen, Ming; Mikkelsen, Lars; Hendriksen, Peter Vang.

In: Proceedings. Vol. Vol. 2 ASME, 2010. p. 655-665.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2011

A Simplified Approach for J Integral Analysis of Laminates and Sandwich Structures. / Rask, Morten; Sørensen, Bent F.

In: Technical Program. ASME, 2009. p. IMECE2009-13230.

Publication: Research › Conference abstract in proceedings – Annual report year: 2009

Extreme Response Predictions For Jack-Up Units In Second Order Stochastic Wawes by Form. / Jensen, Jørgen Juncher.

In: 26 the annual International Conference on Offshore Mechanics and Arctic Engineering. San Diego, USA : ASME, 2007.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2007

Questions as a tool to design : DTM-35675. / Aurisicchio, Marco; Ahmed, Saeema; Wallace, Ken.

In: American Society of Mechanical Engineers Design Theory and Methodology. Las Vegas : ASME, 2007.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2007

The oxidation of high chromium containing alloys in simulated solid oxide fuel cell atmospheres. / Shemet, V.; Larring, Y.; Mikkelsen, Lars; Santacreu, P.O.

In: Proceedings. ASME, 2007.

Publication: Research › Conference abstract in proceedings – Annual report year: 2007

The oxidation of high chromium containing alloys in simulated solid oxide fuel cell atmospheres. / Shemet, V.; Larring, Y.; Mikkelsen, L.; Santacreu, P.O.

In: Proceedings. ASME, 2007.

Publication: Research › Conference abstract in proceedings – Annual report year: 2007

Case Study in Biomimetic Design: Handling and Assembly of Microparts. / Shu, Li; Hansen, Hans Nørgaard; Gegeckaite, Asta; Moon, Jack; Chan, C.

In: ASME 2006 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 10-13, 2006, Philadelphia, PA, USA. Vol. CD room proceedings Philadelphia, USA : ASME, 2006. p. 1-9.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2006

Active Lubrication for Eliminating Instability Problems in Rotating Machines. / Santos, Ilmar.

In: Proceeding of III World Tribology Conference. ed. / R. S. Cowan; J. G. Tichy; J. Knight. Washington, DC, USA : ASME, 2005. p. 1-2.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2005

Characterization of Oil Film Control Forces under Active Lubrication Regime. / Santos, Ilmar; Christensen, B. F.

In: Proceeding of III World Tribology Conference. ed. / R. S. Cowan; S. G. Tichy; J. Knight. Washington, DC, USA : ASME, 2005. p. 1-2.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2005

Numerical Study of Thermo-Acoustic Wave Generation by a Swirling Flame Using a New Approach Based on Large Eddy Simulation. / Duwig, Christophe; Gherman, Bogdan; Mihaescu, Mihai; Salewski, Mirko; Fuchs, Laszlo.

In: Proceedings. ASME, 2005. p. GT2005-68136.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2005

Precision manufacturing methods of inserts for injection molding of microfluidic systems.. / Bissacco, Giuliano; Hansen, Hans Nørgaard; Tang, Peter Torben; Fugl, Jimmy.

In: ASPE Spring Topical Meeting on Precision Mecro/Nano Scale Polymer Based Component & Device Fabricati. ASME, 2005.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2005

The Design and performance of the European freight wagon standard suspensions. / True, Hans; Hoffmann, Mark; Jönsson, Per-Anders.

In: Proceedings of IMECE2005, November 5-11, 2005, Orlando, Florida, USA. ASME, 2005. p. 1-10.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2005

A Study of Active Rotor-Blade Vibration Control using Electro-Magnetic Actuation - Part I: Theory. / Christensen, Rene Hardam; Santos, Ilmar.

In: Procedings of 2004 ASME Turbo Expo. ASME, 2004. p. 1-10.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2004

DRed and Design Folders : A way of Capturing, Storing and Passing On, Knowledge Generated During Design Projects: DETX2004-57165. / Bracewell, R.H.; Ahmed, Saeema; Wallace, Ken.

In: ASME proceedings: Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Salt Lake, Utah : ASME, 2004.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2004

REGENERATIVE GAS TURBINES WITH DIVIDED EXPANSION. / Elmegaard, Brian; Qvale, Einar Bjørn.

In: ASME Turbo Expo. ed. / Tony Strazisar. Vienna : ASME, 2004.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2004

Evaluating a Functional Basis : Design Theory and Methodology. / Ahmed, Saeema; Wallace, Ken M.

In: Proceedings of ASME 2003 Design Engineering Technical Conferences and. ASME, 2003.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2003

Gas Flow and Heat Transfer Analysis for an Anode Duct in Reduced Temperature SOFCs. / Yuan, Jinliang; Rokni, Masoud; Sundén, Bengt.

In: Fuel Cell Science, Engineering and Technology. ed. / R. K. Shah; S. G. Kandlikar. ASME, 2003. p. 209-216.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2003

Modeling of Two-Phase Flow in a Cathode Duct of PEM Fuel Cells. / Yuan, Jinliang; Rokni, Masoud; Sundén, Bengt.

In: Fuel Cell Science, Engineering and Technology. ed. / R. K. Shah; S. G. Kandlikar. ASME, 2003.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2003

Simultaneous measurement of velocity and concentration in a jet in channel-crossflow. / Özcan, Oktay; Meyer, Knud Erik; Larsen, Poul Scheel; Westergaard, C. H.

In: Proceedings of FEDSM2001-18220. ASME, 2001.

Publication: Research - peer-review › Article in proceedings – Annual report year: 2001

Lubricity Additives and Wear with DME in Diesel Injection Pumps. / Nielsen, Kasper; Sorenson, Spencer C.

In: Emissions, Fuels and Lubricants and HSDI Engines. New York : ASME, 1999. p. 145-153.

Publication: Research - peer-review › Article in proceedings – Annual report year: 1999

Reliability Based Management of Marine Fouling. / Faber, Michael Havbro; Hansen, Peter Friis.

In: Proceedings of the 18th International Conference on Offshore Mechanics and Arctic Engineering. New York : ASME, 1999.

Publication: Research - peer-review › Article in proceedings – Annual report year: 1999

The Relationship Between Data, Information and Knowledge based on an Observation of Engineering Designers : Design Theory and Methodology. / Ahmed, Saeema; Blessing, L.; Wallace, K. M.

In: ASME/DETC. Las Vegas : ASME, 1999.

Publication: Research - peer-review › Article in proceedings – Annual report year: 1999

Chemical Reaction Conditions in a Danish 80 MWth CFB-Boiler Co-firing Straw and Coal. / Lin, Weigang; Dam-Johansen, Kim.

In: Proceedings of the 14th International Conference on Fluidized Bed Combustion. New York : ASME, 1997. p. 287-294.

Publication: Research - peer-review › Book chapter – Annual report year: 1997

Modelling of Devolatilization in Fluidized Bed Combustion. / Stenseng, Mette; Lin, Weigang; Johnsson, Jan Erik; Dam-Johansen, Kim.

In: Proceedings of the 14th International Conference on Fluidized Bed Combustion. New York : ASME, 1997. p. 117-124.

Publication: Research - peer-review › Article in proceedings – Annual report year: 1997

The thermal compressive behaviour of a NiTi fibre 6082-T6 aluminium alloy matrix composite. / Armstrong, W.D.; Lorentzen, T.

In: Proceedings of the ASME Winter annual meeting symposium on adaptive structures and material systems. ASME, 1997. p. 541-546 (AD, 54).

Publication: Research › Article in proceedings – Annual report year: 1997

A Comparison Between Measured and Predicted Hydrodynamic Damping for a Jack-Up Rig Model. / Laursen, Thomas; Rohbock, Lars; Jensen, Jørgen Juncher; Baatrup, Jan; Gründlehner, Gert-Jan.

In: Proceedings of the 15th International Conference on Offshore Mechanics and Arctic Engineering. Florence : ASME, 1996. p. 235-247.

Publication: Research - peer-review › Article in proceedings – Annual report year: 1996

Introduction of a Fuel Cell Into a Combined Cycle: A Competitive Choice for Future Cogeneration. / Rokni, Masoud.

In: ASME COGEN-TURBO POWER 93: /th Congress & Exposition on Gas Turbines in Cogenerations and Utility. ed. / H. W. Holland; W. E. Hauhe JR.; D. H. Cooke; H. Lukas. Vol. 8 ASME, 1993. p. 255-262.

Publication: Research - peer-review › Article in proceedings – Annual report year: 1993

Yaw stability for the two-bladed teetering rotor concept. / Kretz, A.; Rasmussen, F.

In: Wind energy 1993. ed. / S.M. Hock. New York : ASME, 1993. p. 125-131 (SED-Vol. 14).

Publication: Research › Article in proceedings – Annual report year: 1993

Thermomechanical fatigue of ceramic matrix composites: Analysis of mechanisms at a microscale. / Sørensen, Bent F.; Toft Sørensen, O.; Talreja, R.

In: Failure mechanisms in high temperature composite materials. ed. / G.K. Haritos; G. Newaz; S. Mall. New York : ASME, 1992. p. 7-13 (AD-vol. 22; AMD-vol. 122).

Publication: Research › Article in proceedings – Annual report year: 1992

On Uncertainties in Power Performance Measurements. / Frandsen, S.

In: 6. ASME Wind Energy Symposium. ed. / R.W. Thresher. New York : ASME, 1987. p. 157-169 (SED-Vol. 3).

Publication: Research › Article in proceedings – Annual report year: 1987

Standards for Wind Turbine Design in Denmark. / Madsen, Peter Hauge.

In: 6. ASME Wind Energy Symposium. ed. / R.W. Thresher. New York : ASME, 1987. p. 57-58 (SED-Vol. 3).

Publication: Research › Article in proceedings – Annual report year: 1987

A Method for Estimating Fatigue Damage Rates for Wind Turbine Structures. / Holley, W. E.; Madsen, Peter Hauge.

In: 4. ASME Wind Energy Symposium, Dallas, 17-21 February 1985. ed. / A. H. P. Swift. New York : ASME, 1985. p. 55-64.

Publication: Research - peer-review › Article in proceedings – Annual report year: 1985

Laser-Based Method for Analysing Rotational Speed and Vorticity. / Hanson, Steen Grüner.

In: Proceedings of the International Symposium on Laser Anemometry. New York : ASME, 1985. p. 91-95.

Publication: Research › Article in proceedings – Annual report year: 1985