Tri-generation system based on municipal waste gasification, fuel cell and an absorption chiller

Research output: Research - peer-reviewJournal article – Annual report year: 2018



View graph of relations

The present work focuses on the design of a novel tri-generation system based on gasification of municipal solid wastes, a solid oxide fuel cell and an ammonia-water absorption chiller. Tri-generation systems can be implemented in buildings such as hospitals and hotels, where there is a continuous and large demand for electricity, heating and cooling. The system is modelled in Aspen Plus and the influence of different operating parameters on the system performance was studied. The findings suggest that low air equivalent ratios and high gasification temperatures enhance the overall system performance. Syngas cleaning with metal sorbents zinc oxide and sodium bicarbonate for the removal of hydrogen sulfide and hydrogen chloride concentrations proved to be very effective, reducing the concentration of contaminants to <1 ppm (part per million) levels. The possibility of covering the demand profiles of a specific building was also investigated: the system could fully meet the electricity and cooling demands, whereas the heat requirements could be satisfied only up to 55%. Moreover, assuming 20 years of operation, the payback period was 4.5 years and the net present value exceeded 5 million euros.
Original languageEnglish
JournalJournal of Sustainable Development of Energy, Water and Environment Systems
Issue number1
Pages (from-to)13-32
StatePublished - 2018

Bibliographical note

Open Access - (CC BY 3.0)

CitationsWeb of Science® Times Cited: 3

    Research areas

  • Absorption chiller, Gasification, Municipal waste, Solid oxide fuel cells, Syngas, Tri-generation
Download as:
Download as PDF
Select render style:
Download as HTML
Select render style:
Download as Word
Select render style:

Download statistics

No data available

ID: 147622409