Publication: Research - peer-review › Conference article – Annual report year: 2000
The propagation of ultrasound through an austenitic weld is investigated experimentally as well as in a numerical simulation. The weld is insonified at normal incidence to the fusion line with a longitudinal contact transducer. In order to experimentally trace the ultrasound through the weld, slices of different thicknesses from the original weld have been fabricated. Through-transmission A-scans have then been produced for each weld slice and compared with the corresponding numerical simulation. A comparison of the direction of ultrasound propagation through the weld for the two approaches shows quite good agreement. However, attenuation due to scattering at grain boundaries in the weld is poorly modelled in the simulation. In order to improve this, a better model of the weld is needed.
|State||Published - 2000|
|Event||1st Joint Meeting Ultrasonics International 99 and 1999 World Congress on Ultrasonics (UI 99/WCU 99) - Lyngby, Denmark|
|Conference||1st Joint Meeting Ultrasonics International 99 and 1999 World Congress on Ultrasonics (UI 99/WCU 99)|
|???event.location???||Technical University of Denmark|
|Period||29/06/1999 → 01/07/1999|
|Citations||Web of Science® Times Cited: No match on DOI|
- Austenitic weld, Comparison, Experiment, Numerical simulation, Ultrasound
Loading map data...