Publication: Research - peer-review › Article in proceedings – Annual report year: 1999
The texture gradients and microstructural variations are investigated in commercially pure aluminium plates 40% cold-rolled either with small draughts or with intermediate draughts. In these two samples, different textures are observed near the quarter thickness layer. A pronounced shear texture is found in the sample rolled with small draughts, while a rolling texture is observed in the sample rolled with intermediate draughts. Also, significant differences were found in the rolled microstrucrures near the quarter thickness. After rolling with intermediate draughts, extended dislocation boundaries preferentially aligned at an angle of about 25-45o to the rolling direction are observed in the longitudinal section. After rolling with small draughts, extended dislocation boundaries are preferentially aligned closer to the rolling direction. These results are discribed and discussed.
|Title of host publication||Proceedings of the 12th International conference on textures of materials|
|Place of Publication||Ottawa|
|Publisher||NRC Research Press|
|State||Published - 1999|
|Event||12th International Conference on Textures of Materials - Montreal, Canada|
|Conference||12th International Conference on Textures of Materials|
|Period||09/08/1999 → 13/08/1999|
Loading map data...