The effect of preparation method on the proton conductivity of indium doped tin pyrophosphates

Publication: Research - peer-reviewJournal article – Annual report year: 2015

View graph of relations

Indium doped tin pyrophosphates were prepared by three synthetic routes. A heterogeneous synthesis from metal oxides with excess phosphoric acid produces crystalline phosphate particles with a phosphorus rich amorphous phase along the grain boundaries. The amorphous phase prevents the agglomeration of particles, hydrolyzes in moist atmosphere as revealed by FT-IR and solid state NMR, and facilitates a high proton conductivity (above 2.5 × 10-2 Scm- 1) with high stability at above 120 °C under a water partial pressure of 0.15 atm. This phase can be removed by washing with water, resulting in a dramatic decrease in conductivity as well as significant agglomeration of the particles, as evident in TEM and from particle size distribution measurements. Homogeneous synthesis with soluble metal acetates or chlorides as precursors results in a single crystalline phase with a small particle size, but strongly agglomerated, and a low conductivity at 10- 7-10- 6 Scm- 1 level. Further impregnation of the agglomerates with phosphoric acid does not lead to formation of the phosphorus rich amorphous layers on the surface of the crystals. An intermediate conductivity of 10- 3 Scm- 1 was observed for the acid treated phosphates from the chloride synthesis but no improvement for the acid treated phosphates from the acetate synthesis was observed.
Original languageEnglish
JournalSolid State Ionics
Volume278
Pages (from-to)209-216
Number of pages8
ISSN0167-2738
DOIs
StatePublished - 2015
CitationsWeb of Science® Times Cited: 4

    Keywords

  • Indium doped tin pyrophosphate, Intermediate temperature fuel cell, Proton conductor, Water electrolysis, Agglomeration, Chlorine compounds, Crystalline materials, Grain boundaries, Hydrogen, Indium, Nuclear magnetic resonance spectroscopy, Particle size analysis, Phosphates, Phosphoric acid, Phosphorus, Proton conductivity, Tin, Heterogeneous synthesis, Intermediate-temperature fuel cells, Particle size distribution measurement, Proton conductors, Single-crystalline phase, Tin pyrophosphates, Water partial pressure, Particle size
Download as:
Download as PDF
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
Word

ID: 113788905