Safety and function Test Report. Version 2
Publication: Research › Report – Annual report year: 2012
Standard
Safety and function Test Report. Version 2. / Vesth, Allan.
DTU Wind Energy, 2012. 156 p. (DTU Wind Energy WTT I; No. 1011).Publication: Research › Report – Annual report year: 2012
Harvard
APA
CBE
MLA
Vancouver
Author
Bibtex
}
RIS
TY - RPRT
T1 - Safety and function Test Report. Version 2
A1 - Vesth,Allan
AU - Vesth,Allan
PB - DTU Wind Energy
PY - 2012
Y1 - 2012
N2 - The report describes Safety and function tests carried out on specific wind turbine.The turbine has been instrumented and reported for a load measurement according to IEC 61400-13. All loads (e.g. blade; tower and main shaft bending moments) measured and documented in this report are only calibrated by gravity loads. According to DTU Wind Energy’s quality manual all calibrations shall be traceable and independent, therefore this report does not comply with DTU Wind Energy’s quality manual and DTU Wind Energy’s interpretation of the IEC standard. The results of the measurements, described in this report, are only valid for the specific wind turbine.<br/>
AB - The report describes Safety and function tests carried out on specific wind turbine.The turbine has been instrumented and reported for a load measurement according to IEC 61400-13. All loads (e.g. blade; tower and main shaft bending moments) measured and documented in this report are only calibrated by gravity loads. According to DTU Wind Energy’s quality manual all calibrations shall be traceable and independent, therefore this report does not comply with DTU Wind Energy’s quality manual and DTU Wind Energy’s interpretation of the IEC standard. The results of the measurements, described in this report, are only valid for the specific wind turbine.<br/>
KW - DTU Wind Energy WTT I-1011(EN)
KW - WTT-I-1011
KW - WTT-I-1011(EN)
BT - Safety and function Test Report. Version 2
T3 - DTU Wind Energy WTT I
T3 - en_GB
ER -