Publication: Research - peer-review › Poster – Annual report year: 2012
The present work attempts at quantifying the effects of using slats on the inner part of a modern multi-MW rotor as a post-fix to increase power production. In the process of doing this, the main behavior of the underlying physics is illuminated using a simplified BEM approach, and the effect of the lift and drag forces on local and integral power production and thrust is shown in a clear way. wo different methods (a BEM based and a free wake lifting line method) for determining angles of attack and lift coefficients corresponding to a specific loading on the inner part of the rotor are shown, and the results are compared. For the design of the slats, a 2D CFD based optimization approach is shown, and the final results from the algorithm for four specific inner airfoil sections on the multi-MW rotor is shown. Finally, the impact of the alteration of the airfoil section force characteristics are shown in the design point using both a BEM based and a free wake lifting line method, and BEM based results are used to asses the effects of the addition of the slats on the annual energy production.
|Number of pages||12|
|State||Published - 2012|
|Conference||EWEA 2012 - European Wind Energy Conference & Exhibition|
|Period||16/04/2012 → 19/04/2012|
- EWEA 2012
Loading map data...
No data available