## Process optimization of friction stir welding based on thermal models

Publication: Research › Ph.D. thesis – Annual report year: 2010

### Standard

**Process optimization of friction stir welding based on thermal models.** / Larsen, Anders Astrup; Stolpe, Mathias (Supervisor); Hattel, Jesper Henri (Supervisor); Sigmund, Ole (Supervisor).

Publication: Research › Ph.D. thesis – Annual report year: 2010

### Harvard

*Process optimization of friction stir welding based on thermal models*. Ph.D. thesis.

### APA

*Process optimization of friction stir welding based on thermal models*.

### CBE

### MLA

*Process optimization of friction stir welding based on thermal models*2010.

### Vancouver

### Author

### Bibtex

}

### RIS

TY - BOOK

T1 - Process optimization of friction stir welding based on thermal models

A1 - Larsen,Anders Astrup

AU - Larsen,Anders Astrup

A2 - Stolpe,Mathias

A2 - Hattel,Jesper Henri

A2 - Sigmund,Ole

ED - Stolpe,Mathias

ED - Hattel,Jesper Henri

ED - Sigmund,Ole

PY - 2010/2

Y1 - 2010/2

N2 - This thesis investigates how to apply optimization methods to numerical models of a friction stir welding process. The work is intended as a proof-of-concept using different methods that are applicable to models of high complexity, possibly with high computational cost, and without the possibility for efficient gradient calculation. Thus, the focus is on surrogate optimization methods with the aim of reducing the number of expensive function evaluations, by using a low-fidelity model together with the highfidelity model to be optimized. The methods used here do not require the user to supply gradient information of the high-fidelity model. The optimization schemes are applied to stationary thermal models of differing complexity of the friction stir welding process. The optimization problems considered are based on optimizing the temperature field in the workpiece by finding optimal translational speed and rotational speed of the tool. Besides the deterministic problem a robust optimization problem is considered in which the effects of uncertain material and optimization parameters are taken into account. The objective is to obtain a desired mean response while reducing the standard deviation of the response. Also an optimization problem based on a microstructure model is solved, allowing the hardness distribution in the plate to be optimized. The use of purely thermal models represents a simplification of the real process; nonetheless, it shows the applicability of the optimization methods considered and forms the basis for optimization of more detailed models. Surrogate models of varying complexity, and similarity with the true model, are applied and the effect on the optimization results is discussed. Furthermore, the thesis contributes to the modelling of the heat transfer between the workpiece and the backingplate by solving an inverse modelling problem in which experimental data and a numerical model are used for determining the contact heat transfer coefficient. Different parametrizations of the spatial distribution of the heat transfer coefficient are studied and discussed, and the optimization problem is formulated as a minimization of the difference between measured and calculated temperatures. The magnitude and distribution of the heat transfer coefficient is determined for the available data.

AB - This thesis investigates how to apply optimization methods to numerical models of a friction stir welding process. The work is intended as a proof-of-concept using different methods that are applicable to models of high complexity, possibly with high computational cost, and without the possibility for efficient gradient calculation. Thus, the focus is on surrogate optimization methods with the aim of reducing the number of expensive function evaluations, by using a low-fidelity model together with the highfidelity model to be optimized. The methods used here do not require the user to supply gradient information of the high-fidelity model. The optimization schemes are applied to stationary thermal models of differing complexity of the friction stir welding process. The optimization problems considered are based on optimizing the temperature field in the workpiece by finding optimal translational speed and rotational speed of the tool. Besides the deterministic problem a robust optimization problem is considered in which the effects of uncertain material and optimization parameters are taken into account. The objective is to obtain a desired mean response while reducing the standard deviation of the response. Also an optimization problem based on a microstructure model is solved, allowing the hardness distribution in the plate to be optimized. The use of purely thermal models represents a simplification of the real process; nonetheless, it shows the applicability of the optimization methods considered and forms the basis for optimization of more detailed models. Surrogate models of varying complexity, and similarity with the true model, are applied and the effect on the optimization results is discussed. Furthermore, the thesis contributes to the modelling of the heat transfer between the workpiece and the backingplate by solving an inverse modelling problem in which experimental data and a numerical model are used for determining the contact heat transfer coefficient. Different parametrizations of the spatial distribution of the heat transfer coefficient are studied and discussed, and the optimization problem is formulated as a minimization of the difference between measured and calculated temperatures. The magnitude and distribution of the heat transfer coefficient is determined for the available data.

KW - Friction stir welding

KW - Optimization

BT - Process optimization of friction stir welding based on thermal models

ER -