Preparation and operation of gas diffusion electrodes for high-temperature proton exchange membrane fuel cells - DTU Orbit

‹ Back to search result

Preparation and operation of gas diffusion electrodes for high-temperature proton exchange membrane fuel cells

Publication: Research - peer-review › Journal article – Annual report year: 2007

DOI

10.1016/j.jpowsour.2007.07.019

From the same journal

Alkaline electrolysis cell at high temperature and pressure of 250 °C and 42 bar
Publication: Research - peer-review › Journal article – Annual report year: 2013
Corrigendum to “Cost-minimized combinations of wind power, solar power and electrochemical storage, powering the grid up to 99.9% of the time” [J. Power Sources 225 (2013) 60–74]
Publication: Research - peer-review › Journal article – Annual report year: 2013
Cost-minimized combinations of wind power, solar power and electrochemical storage, powering the grid up to 99.9% of the time
Publication: Research - peer-review › Journal article – Annual report year: 2013
Electrochemical characterization of La_0.6Ca_0.4Fe_0.8Ni_0.2O_3-δ perovskite cathode for IT-SOFC
Publication: Research - peer-review › Journal article – Annual report year: 2013
Infiltration of ionic-, electronic- and mixed-conducting nano particles into La_0.75Sr_0.25MnO₃–Y_0.16Zr_0.84O₂ cathodes – A comparative study of performance enhancement and stability at different temperatures
Publication: Research - peer-review › Journal article – Annual report year: 2013

By the same authors

A Quaternary Polybenzimidazole Membrane for Intermediate Temperature Polymer Electrolyte Membrane Fuel Cells
Publication: Research - peer-review › Journal article – Annual report year: 2013
Conductivity of Composite Material Based on System NdPO₄·nH₂OCsH₂PO₄
Publication: Research - peer-review › Conference article – Annual report year: 2013
Covalently Cross-Linked Sulfone Polybenzimidazole Membranes with Poly(Vinylbenzyl Chloride) for Fuel Cell Applications
Publication: Research - peer-review › Journal article – Annual report year: 2013
Fabrication and Characterizations of Materials and Components for Intermediate Temperature Fuel Cells and Water Electrolysers
Publication: Research › Poster – Annual report year: 2013
Indium doped niobium phosphates as intermediate temperature proton conductors
Publication: Research - peer-review › Journal article – Annual report year: 2013

Author: Pan, Chao
Energy and Materials, Department of Chemistry, Technical University of Denmark, Kemitorvet, 2800, Kgs. Lyngby
Email:
Author: Li, Qingfeng
Energy and Materials, Department of Chemistry, Technical University of Denmark, Building 207, 2800, Lyngby
Email:
Author: Jensen, Jens Oluf
Energy and Materials, Department of Chemistry, Technical University of Denmark, Kemitorvet, 2800, Kgs. Lyngby
Email:
Author: He, Ronghuan
Author: Cleemann, Lars Nilausen
Energy and Materials, Department of Chemistry, Technical University of Denmark, Kemitorvet, 2800 , Kgs. Lyngby
Email:
Author: Bjerrum, Niels
Energy and Materials, Department of Chemistry, Technical University of Denmark
Email:
Author: Zeng, Qingxue

View graph of relations

Original language	English
Journal	Journal of Power Sources
Publication date	2007
Volume	172
Journal number	1
Pages	278-286
ISSN	0378-7753
DOIs	http://dx.doi.org/10.1016/j.jpowsour.2007.07.019
State	Published

Citations	Web of Science® Times Cited: 25

ID: 3877345