Optimum position of isolators within erbium-doped fibers

Publication: Research - peer-review › Journal article – Annual report year: 1992

Standard

Optimum position of isolators within erbium-doped fibers. / Lumholt, Ole; Schüsler, Kim; Bjarklev, Anders Overgaard; Dahl-petersen, Svend; Povlsen, Jørn Hedegaard; Rasmussen, Thomas; Rottwitt, Karsten.

In: I E E E Photonics Technology Letters, Vol. 4, No. 6, 1992, p. 568-570.

Publication: Research - peer-review › Journal article – Annual report year: 1992

In: I E E E Photonics Technology Letters, Vol. 4, No. 6, 1992, p. 568-570.

Publication: Research - peer-review › Journal article – Annual report year: 1992

Bibtex

@article{cacba37625d34795b2c44e2579fa32db,

title = "Optimum position of isolators within erbium-doped fibers",

publisher = "I E E E",

author = "Ole Lumholt and Kim Schüsler and Bjarklev, {Anders Overgaard} and Svend Dahl-petersen and Povlsen, {Jørn Hedegaard} and Thomas Rasmussen and Karsten Rottwitt",

note = "Copyright: 1992 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE",

year = "1992",

volume = "4",

number = "6",

pages = "568--570",

journal = "I E E E Photonics Technology Letters",

issn = "1041-1135",

}

RIS

TY - JOUR

T1 - Optimum position of isolators within erbium-doped fibers

A1 - Lumholt,Ole

A1 - Schüsler,Kim

A1 - Bjarklev,Anders Overgaard

A1 - Dahl-petersen,Svend

A1 - Povlsen,Jørn Hedegaard

A1 - Rasmussen,Thomas

A1 - Rottwitt,Karsten

AU - Lumholt,Ole

AU - Schüsler,Kim

AU - Bjarklev,Anders Overgaard

AU - Dahl-petersen,Svend

AU - Povlsen,Jørn Hedegaard

AU - Rasmussen,Thomas

AU - Rottwitt,Karsten

PB - I E E E

PY - 1992

Y1 - 1992

N2 - An isolator is used as an amplified spontaneous emission suppressing component within an erbium-doped fiber. The optimum isolator placement is both experimentally and theoretically determined and found to be slightly dependent upon pump power. Improvements of 4 dB in gain and 2 dB in noise figure are measured for the optimum isolator location at 25% of the fiber length when the fiber is pumped with 60 mW of pump power at 1.48 μm

AB - An isolator is used as an amplified spontaneous emission suppressing component within an erbium-doped fiber. The optimum isolator placement is both experimentally and theoretically determined and found to be slightly dependent upon pump power. Improvements of 4 dB in gain and 2 dB in noise figure are measured for the optimum isolator location at 25% of the fiber length when the fiber is pumped with 60 mW of pump power at 1.48 μm

U2 - 10.1109/68.141970

DO - 10.1109/68.141970

JO - I E E E Photonics Technology Letters

JF - I E E E Photonics Technology Letters

SN - 1041-1135

IS - 6

VL - 4

SP - 568

EP - 570

ER -