Low band gap polymers based on 1,4-dialkoxybenzene, thiophene, bithiophene donors and the benzothiadiazole acceptor
Publication: Research - peer-review › Journal article – Annual report year: 2010
Four new copolymers of 1,4-dialkoxybenzene, thiophene, bithiophene and benzothiadiazole have been prepared and investigated for optical properties and in photovoltaic devices. The structures were chosen to show the effect of successively introducing an acceptor moiety, longer alkoxy side chains and finally, substituting thiophene for bithiophene. The absorption spectra and IPCE showed that these are low band gap polymers that can harvest light in the visible spectrum (400 to 700 nm) and that photoelectrons are generated in the whole range. The photovoltaic devices produced short circuit current densities (Jsc) of 2.6 to 4.6 mA/cm2 under AM1.5 G illumination. The open circuit voltage (Voc) was 0.56 to 0.64 V and the efficiencies (η) of 0.8% to 2.2% depending on the structure.
|Journal||Solar Energy Materials & Solar Cells|
|State||Published - 2010|
This work was supported by the Danish Strategic Research Council (DSF 2104-05-0052 and 2104-07-0022) and by EUDP (j. nr. 64009-0050).
|Citations||Error in DOI please contact email@example.com|
- Polymer solar cells, Solar energy