Investigation of parameters controlling the dielectrophoretic assembly of carbon nanotubes on microelectrodes

Publication: Research - peer-reviewJournal article – Annual report year: 2008

View graph of relations

Networks of single-walled carbon nanotubes were assembled onto microelectrodes by dielectrophoresis. The dependence of the obtained networks on several assembly parameters such as bias voltage, field application time, frequency, electrode geometry and the nanotube solvent were investigated both structurally and electrically. Reproducible differences in morphological and electrical properties were observed for the parameters investigated. Application of a bias voltage above 10 V for more than 30 seconds with nanotubes in an SDS solution, resulted in dense networks with a relatively low resistance in the 10 k Omega regime. On the other hand, individual nanotubes and bundles were assembled with lower voltages applied for less than 10 seconds and with other nanotubes solutions. The experimental results were combined with theoretical calculations in order to find a geometry and voltage independent threshold field for the successful assembly of nanotubes between electrodes using dielectrophoresis.
Original languageEnglish
JournalJournal of Nanoscience and Nanotechnology
Publication date2008
Volume8
Issue4
Pages1973-1978
ISSN1533-4880
DOIs
StatePublished
CitationsWeb of Science® Times Cited: 6

Keywords

  • dielectrophoresis, carbon nanotubes, microelectrodes, process control
Download as:
Download as PDF
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBEHarvardMLAStandardVancouverShortLong
Word

ID: 3593641